Osmania University Tender

Supply & fixing 30 mm nominal size dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials and labour charges etc., complete.

S&F of 15 mm Stainless steel flexible hose 1.0 m long for hand shower / health faucet with brass nuts including cost and conveyance of all materials and labour charges etc., complete.

S&F Stainless steel4" dia round Grating with frame for nahany or floor trap cover with or without hole including cost and conveyance of all materials and labour charges etc., complete.

S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight screw type (full turn) with internal / external threaded connection conforming to IS 8931 including cost and conveyance of all materials and labour charges etc., complete.

Supply, Installation and commissioning approved make floor mounted Anglo Indian wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc. complete for finished item of work in all respects: White Colour

Supplying & Fixing low down porcelain flushing tank with lid 10 Lit Capacity with internal components including cost and conveyance of all materials and labour charges etc., complete.

Supplying & fixing stainless steel sink size 20" x18" x 8" (508x457.2x203.2mm) 1mm thick with accessories including cost and conveyance of all materials and labour charges etc., complete.

Removing of old existing IWC including cost and conveyance of all materials and labour charges etc., complete.

Labour charges only for fixing low down porcelain flushing tank with internal components etc., for finished item of work.

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, complete for finished item of work at all floor levels. - 75mm

Supplying and fixing of SWR PVC pipes (Prince/Sudhakar) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, complete for finished item of work at all floor levels. - 110mm

S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 including cost and conveyance of all materials and labour charges etc., complete.

S& F 40 mm Nominal Bore GI pipe Medium Grade properties & weight as per IS 1239 ISI mark with GI fittings including the cost of pipe & its fittings & labour charges complete

Supply of Plastic storage tank lid with hinges including cost and conveyance of all materials and labour charges etc., complete.

Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks for finished item of work etc., complete.

Supply and fixing of weld mesh grill of size 1" x 3" fixing with 2" x 1/2" beading including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supply and fixing of GI (MS) fly proof mesh 20 gauge with 14 x 14 nuts / Sq.inch fixing with 2" x 1/2" beading including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Plain Cement Concrete (1:5:10) (Cement: Fine Aggregate: Coarse Aggregate) for foundations and under flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., complete for finished item of work.

Plain Cement Concrete (1:2:4) (M20) Grade Nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) (consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges, for finished item of work.

Granolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement, metal sand and water etc. complete, including seigniorage charges etc., complete for finished item of work

Supply & fixing RCC cover 22" dia with nominal reinforcement 3 " thick and hooks for lifting including cost and conveyance of all materials and labour charges etc., complete.

Cutting road surface including stacking of excavated materials for pipe line trench work. - Cutting B.T.Road surface for finished item of work.

Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , etc., complete

Reinforced Brick Masonry for Partition walls (11.0 CM Thick) in CM (1:4) prop. (Cement : Sand) using second class bricks of size 23 x 11 x 7 cms from approved source having minimum crushing strength of 40 Kg/Sq.cm and placing 2 nos of 6mm M.S plain rods in every third layer with free ends of the reinforcement pegged into mortar joints of main brick walls where applicable including cost and conveyance of all materials like cement, steel, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental charges such as labour charges like mixing cement mortar, scaffolding charges, constructing masonry, lift charges, curing, etc., but excluding cost of steel and its fabrication charges complete for finished item of work.

Plastering 12mm thick in two coats with base coat of 16mm thick in CM (1:6) prop. and top coat of 4mm thick in CM(1:4) prop. with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer-in-charge etc., complete for finished item of work .

Supply and fixing of GI (MS) fly proof mesh 25 gauge with 14 x 14 nuts / Sq.inch fixing with 2" x 1/2" beading including cost and conveyance of all materials and labour charges etc complete for finished item of work.

Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0")) depth and refilling with watering and tamping. for finished item of work.

Constructing 457.2 mm x 457.2mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg. including cost and conveyance of all materials and labour charges etc., complete.

Constructing 904.0 mm (3’0”) dia solid block masonry inspection chamber as per IS - 4111: Part- 1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar (1:3) prop; ½” thick both inside and outside fitted with 20” dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C.(1:2:4) prop. benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.

Coursed Rubble stone masonry 2nd sort in CM (1:8) prop: (Cement: Sand) using Hard Granite Stones carted from approved quarry including cost and conveyance of all materials like cement, sand, water, stones etc., from approved quarry, to site and including seigniorage charges, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc., complete for finished item of work in basement. using Departmental stone

Masonry work in CM (1:8) prop with Fly ash Cement Solid Blocks of size 290mm x 225mm x 140mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs , .Gypsum of 5kgs and stone dust including cost and conveyance of all materials,labour charges,seigniorage charges,scaffolding and curing etc., complete with a compressive strength not less than 50 kg/sq.cm

Providing impervious coat to exposed RCC Roof Slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., complete for finished item of work.