Osmania University Tender

Shifting of Electrical Panel Board;Supply and Fixing of 25mm outer dia Medium grade surface ISI P.V.C. pipe with IS:9537 part 3 regid with all accessories fixing on chromium plated metallic base saddles including all labour charges etc., complete for run of mains.

Shifting of Electrical Panel Board;Supply and run of 4 of 6.0 Sq.mm & 1 of 4.0 sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specifications Copper cable for jointing the old mains wires from newly proposed panel board including all labour charges etc., complete.

Shifting of Electrical Panel Board;Supply and run of 4 of 10 Sq.mm & 1 of 4.0 sq.mm FRLSH / HFFR PVC insulated 1100V grade as per IS:694/1990, IS 17048 specifications Copper cable for jointing the old mains wires from newly proposed panel board including all labour charges etc., complete.

Shifting of Electrical Panel Board;Shifting of Old Existing 400A FP MCCB Incommer from old damaged electrical room to Newly proposed Electrical room out side the library with Iron Holding Structure by removing all the old power cable connections & reconnecting to new panel board including all labour charges etc., complete.

Shifting of Electrical Panel Board;Removing of old iron stand for holding change over switch without breaking and refixing in new electrical room on c.c pedestals made with 1:2:4 proprtion with cement etc., related labour charges work complete.

Shifting of Electrical Panel Board;Supply and erection of Panel mounting cubical type L.T heavy duty ON LOAD change over switch of 400A, 4 pole, 415V, 50 Hz. with all accessories etc., complete on existing control panel.

Shifting of Electrical Panel Board;Supply transportation and fixing of 60/65 W +/-10% (>=3000 lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Suitable lens on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000 - 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates etc complete with , 5 years warranty. etc., complete fixing on wall with 40mm dia 'A' class G.I. pipe duly bent into suitable angle with necessary suitable clamps/anti-tilting flats and bolts,nuts etc., complete.

Shifting of Electrical Panel Board;Supply and fixing of 6A 3/2 pin wall plug socket with shutter, 6A switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete.

Shifting of Electrical Panel Board;Wiring with 2 runs of (1.0 Sq.mm) Fire Retardant FRLS / HFFR P.V.C. insulated 1100V as per IS : 694/1990 Specifications flexible copper cable in existing pipe with 6A switch, Ceiling rose and suitable D.C sheet switch box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non -Residential Buildings

Shifting of Electrical Panel Board;Supply transportation and fixing of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with PC body, wide operating voltage with Single / double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification including labour charges etc., complete.

Shifting of Electrical Panel Board;Supply, Fabrication, erection testing and commissioning of Indoor type panel board with Copper bus bars fabricated with 16 SWG CRCA (1.6mm) sheet steel enclosure for power control cubicle panel / boxes including cutting, bending drilling, welding and reveting etc., complete with cleaning with 7 tank process and painting with powder coating of size 70"x 72"x 15" deep with 1) RYBN Copper bus bar Strip of size (30mm x 6mm x 1.2 Mts.) long - 4No's. 2) 400A 4 Pole MCCB, 35/36KA- 1No. with RYBN Link patty 3) 125A 4 Pole MCCB, 25KA - 3No's with RYBN Link patty 4) 63A 4 Pole MCCB, 16KA - 5No's with RYBN Link patty 5) 63A 4 Pole MCB, 10KA - 8No's. 6) Internal bus bar wiring connections: 4 core 25sq.mm sheathed copper cable = 6.0 Mtrs.; 4 core 16 sq.mm sheathed copper cable = 6.40 Mtrs. & 4 core 10 sq.mm sheathed copper cable = 12.80 Mtrs.7) Cable Glands of size 240 Sq.mm -1 No. 8) Copper Lugs: i) 240Sq.mm -6No's ii) 120Sq.mm -3No's iii) 25Sq.mm -27 No's iv) 16Sq.mm -69 No's v) 10 Sq.mm -32 No's 8) Digital Voltmeter-1No. ; Digital Ammeter-1No. ; Selector Switches-2No's with wire connections 9) 100mm x 50mm x 4.7mm C-Channel base not less than 66.24 kgs 10) C-C Pedestals of size [0.4mts x 0.6mts x 0.9mts ] x 2 No?s 1:2:4 prop. 11) Fibre insulators-8No's. 12) LED RYB Phase Indicators-3No's 13)Empire tapes, ncessary bolts & nuts Locking system with hylen key arrangement complete for phases and neutral equipped with bus bar chambers etc., including cost and conveyance of all materials and labour charges. Switch gear Makes : Havells / HPL /Standard.; wires make: Finolex / RR kabel / Havells /Polycab