Nuclear Fuel Complex Tender
... More
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date26 Apr 2025
Closing Date13 May 2025
Tender Amount₹ 2,35,00,000
Technical
Technical
Technical Capacity
... View More
There is no information available regarding the required prior work experience for the bidder, including values like amount and percentage of similar works completed.
Costs
EMD
₹ 4,70,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Civil Works At Old Nursery, Sep And Other Areas Of Nfc, Hyd
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NFC_857856_1Tender No
C/1398/2025Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
a) Upto 1.50 m depth from average ground level.
28
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
6
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in soft rocks over areas including backfilling if required, including getting out and disposal of excavated earth lead upto 50 m, as directed by Engineerin- charge.
-
-
-
... More
a) Upto 1.50 m depth from average ground level.
5
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
2
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in hard rock without blasting over areas including getting out and disposal of excavated earth lead upto 50 m, as directed by Engineerin- charge.
-
-
-
... More
a) Upto 1.50 m depth from average ground level.
5
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
2
-
-
... More
Excavation in TRENCHES for pipes, sewers, etc in all soils except soft and hard rock from average ground level including dewatering if necessary, dressing bottom to required level, profile/slope, back filling in trenches with selected excavated materials in layers not exceeding 250 mm, consolidating, leveling, clearing of all the areas involving excavation of all grass,rank vegetation, shrubs,bushes,cutting of trees upto 300mm grith measured at 1.0 mtr above ground level disposing the spoil within a distance of 50m for ,storm water drains, electrical cables trenches etc.,
-
-
-
... More
a) Upto 1.50 m depth from average ground level for
10
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
3
-
-
... More
Felling down carefully trees of girth (measured at a height of 1.0m above ground level) as mentioned below including necessary excavation, removal / destruction of roots, filling the excavated pockets thus formed with good earth, compacting the same, cutting the trunks and branches of trees into suitable pieces for transporting, transporting, stacking and disposing the same at the locations as directed by Engineer – in – Charge, etc., complete.
-
-
-
... More
Beyond 30 cm girth upto and including 60 cm girth
1
-
-
... More
Beyond 60 cm girth upto and including 120 cm girth
1
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc. complete as specified and directed.
100
-
-
... More
Lead charges upto 2KM or part thereof for additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock , other unserviceable materials etc., Note: If measurement of lead charges is based on truck measurement deduction of voids @20% for soil and 50% for rock, debris, RR masonry, etc.
-
-
-
... More
a) for soil and fine materials
3153
-
-
... More
b) for rock, RR masoary , debris etc
727
-
-
... More
Transportation of tree branches, trunks and roots, scrap by engaging tractor trolley including cost of fuel, wages of driver and required manpower for loading, transporting up to a lead of 2.0 KM, unloading and stacking in the placed shown by Engineer-in-Charge complete as directed.
260
-
-
... More
Filling available excavated earth (excluding rock) in trenches , plinth , sides of foundation etc.., in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50m and lift upto 1.5m.
200
-
-
... More
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width
as well as 10 sqm on plan, including ramming of bottom soil, including getting out and disposal of excavated earth upto 50 m and
lift upto 1.5 m, as directed by Engineer-in- Charge:
-
-
-
... More
All kinds of soil
10368
-
-
... More
Concrete Works
-
-
-
... More
Providing and laying in position ready mixed or site batched design mix cement concrete for plain/Reinforced cement concrete work; using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana/Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering and finishing as per direction of the engineer-in-charge; for the following grades of concrete.
-
-
-
... More
in M-20 grade of concrete with minimum cement content of 320 kg/cum
273
-
-
... More
in Concrete of M10 grade with minimum cement content of 250 kg /cum
1084
-
-
... More
SHUTTERING
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level, vertical, horizontal, inclined including, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed for Foundation, pedestals, plinth beams, slabs, walls, columns etc.,
-
-
-
... More
Below and Upto Finish Floor Level
298
-
-
... More
Above Finish Floor Level
40
-
-
... More
Reinforced Cement Concrete by insitu mixing by WEIGH BATCHING or RMC of Ultra Tech, Birla Ready Mix make of Grade M - 30 (Minimum Cement Content – 390Kg/Cum) using Portland Pozzolana Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with graded stone aggregate of 20mm maximum size and sand at and at all depths and heights including mixing with superplasticizer of make M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturer’s Specifications, conveying / pumping / placing at all depths / heights below / above plinth level, consolidation, finishing as specified, curing, etc., including providing and placing cover blocks of required sizes in cement mortar 1:1, etc., but excluding Formwork and Steel Reinforcement complete as specified and directed. NOTE:-The concrete of RCC of any grade if it is insitu (site mix) the sand to be used shall be River sand.
-
-
-
... More
a) Below FFL
20
-
-
... More
b) Above FFL
10
-
-
... More
Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-25 insitu mixing BY WEIGH BATCHER using Portland Pozzolona Cement conforming to conforming to IS 1489 Latest Edition (M/s. ACC, Ultra Tech,Chettinadu, Coramandal, KCP) , crushed sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches with and without holes.
5
-
-
... More
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag,Sail, JSW make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
9
-
-
... More
Supplying and Fixing in position IRC Fabric of 100X100X4 size conforming to IS 1566 of standard make or its approved equivalent as directed by Engineer-in-charge.
165
-
-
... More
Providing centering and shuttering using good quality densified film-faced Plywood of at least 12mm thick approved make conforming to IS 4990 for obtaining F3 finish including strutting, propping, staging made out of steel frames/H-frames/ Mild Steel (MS) Pipes/Cup and Lock System etc., and removal of the same as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying One (1) coat of shuttering oil (Cemol/Fosroc make/any other ) on all shuttering surfaces coming in contact with concrete,including PVC cover blocks etc., if required, for insitu Reinforced Concrete and in Plain Cement Concrete works etc for suspended floors, roofs, balconies, access platforms etc., complete as specified and directed.
11
-
-
... More
Supply and grouting, column base, anchor holes, holes, pocket foundation tops etc, mixing placing curing etc with Conbextra GP3 or approved equivalent free flow, high strength, Non shrink, cementitious precision grout of approved make (Fosroc, SIKA, pidilite, STP, BASF, ESSAR, ACC) as per manufacturers specification.
500
-
-
... More
Extra over Item-2.08 for providing and mixing 10mm/6 mm aggregate chips before placement of grout mix. (Weight of aggregate shall be measured for payment
250
-
-
... More
Granular Sub base with Coarse Graded Material (Construction of granular sub-base by providing close graded Material conforming to specifications mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge)- With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
293
-
-
... More
Anchoring of reinforcement:
Providing new reinforcement by anchoring in existing RCC/ other substrate material by drilling holes of suitable depth, cleaning with compressed air and fixing the reinforcement of dia upto 25mm by applying suitable epoxy resin based anchoring material (M/s FOSROC Lokfix E-77 or approved equivalent of BASF/ Sika/ Pidilite/ Sunanda/ Krishna etc) as per manufacturer's specification in the substrate to get anchoring length of upto 150mm. (Note: Reinforcement will be payable in relevant item)
80
-
-
... More
Steel Works
-
-
-
... More
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates,Angles etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
-
-
-
... More
a) For Rolled steel sections/ plain plates/chequered plates.
4
-
-
... More
Painting steel surfaces with one coat of zinc chromate primer and two coats of synthetic enamel paint Asian, Pidilite, Johnson & Nicklson, Nerolac, berger, of approved shade including preparing surfaces, cleaning, sand papering, including applying and filling crevices or wherever required suitable filler etc, scaffolding, cleaning, etc., complete.
22
-
-
... More
Supplying, fabricating, erecting and fixing in position, foundation bolts using MS rounds of make M/s Tata, Vizag Steel, Jindal or approved equivalent conforming to IS 432 and suitable nuts and plain washers including threading, placing in position in concrete in level using template, providing grease and protective cover like covering with polyethelene sheet to bolts and nuts to correct levels ,etc complete and as directed by EIC.
0.15
-
-
... More
Providing and fixing in position Anchor Shells/Expansion shells of approved make of HILTI/FISCHER or any other approved of best quality of 16mm dia for anchoring supporting structural steel columns with necessary MS bolts of required size/length including drilling holes in RCC flooring, aligning bolts to position, proper level, Bolts,Washers Labour, etc., complete as directed.
20
-
-
... More
Providing and fixing MS wicketgate/ MS tubular gates single/ double leaves/wicket of required size along with or without wicket gate , comprising structural steel tubes/flats/ frame including providing necesary heavy duty ball bearing hinges,lugs,latches, locking arrangement, pipe inserts and other necessary fittings and fixtures required for smooth operation of gates as per design provided and as directed by Engineer in charge.
(Gate posts will be paid seperately)
1000
-
-
... More
Supplying and fixing in position approved MOTOR OPERATED (push & pull) steel rolling shutters made from M.S. lathes of 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft with tested springs, ceiling strips providing 4 nos. of approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing 1.0 HP motor of Crompton Greaves, L&T or any approved equivalent along with other accessories for on and Off, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
16
-
-
... More
Providing and fixing G.I. chain link fabric fencing, made of G.I. wire of dia 4 mm encaptulated with PVC ( final dia not less than 5mm) of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
672
-
-
... More
Masonry Works
-
-
-
... More
Brick work using flyash bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116 ) at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
17
-
-
... More
Half brick masonry using fly ash cement bricks as of 7.5 grade in partition walls in cement mortar 1:4 using crushed sand of grade conforming to BIS 2116 at all depths and heights below and above plinth level including scaffolding, raking out joints, curing, etc., complete including providing stiffeners of reinforced cement concrete 1:2:4, 115 mm x 75 mm size at every 900 mm height, necessary formwork, curing, etc., complete as per specifications and as directed but excluding reinforcement.
30
-
-
... More
Cement plastering 15 mm thick for internal walls in cement mortar 1:4 finished smooth and at all heights above plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surface, preparation of surface, structural grooves if necessary, steel/tubular scaffolding, curing, etc., complete as directed.
114
-
-
... More
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 (1 cement :3 river sand) finished smooth finish with including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
10
-
-
... More
Cement plastering 20 mm thick in 2 coats over masonary and concrete surfaces upto a height of 10 mtr with base coat of 12 mm thickness in cement mortar 1:4 and finishing coat of 8mm thickness in cement mortar 1:3 (smooth finish), final rendering,double scaffolding wherever necessary ,hacking of concrete surfaces, etc complete.
121
-
-
... More
Making good the damaged portion of walls with cement mortar mix (1 cement: 4 coarse sand) of thickness 20mm to 40mm at all height above plinth level over brick walls or concrete surface to restore the level of surface after removal of wall tiles/replacement of pipeline, including fixing of chicken mesh, hacking over surfaces wherever required, scaffolding curing etc., complete as specified and directed.
40
-
-
... More
Chicken Mesh:
Providing and fixing plaster mesh/chicken mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm size 25mm x 25mm with a zinc coating of 120gms per sqm along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications.
20
-
-
... More
Random rubble stone masonry using approved local stones in foundations/pedestals etc and plinth at all depths below/above finished floor level in cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) including simultaneous flush pointing with the same mortar, bond stones, curing, etc., using crushed stone sand of grade conforming to BIS 2116, complete as specified and directed.
5
-
-
... More
Roof Sheeting Works
-
-
-
... More
Supplying and fixing Fibre Reinforcd Cement Corrugated sheets, 6mm thick of Charminar/ Visakha/ everest make conforming to IS 459 and laying as per IS 3007 at various elevations using necessary safety nets. Roof walk ladders and other standard safety devices including all overlaps, mitring, Supplying and fixing necessary 8mm dia self tapping self drilling self fastening powder coated screws of suitable length not less than 65mm, with EPDM washers as per manufactures code of Practice and cutting the sheets as required etc., complete all as directed by Engineer-in-Charge.
50
-
-
... More
Wood/ Aluminium/ Architectural works
-
-
-
... More
Supplying and fixing in position at all floors integrated bronze anodised matt finished [15 micron thick], aluminium section [extruded] for aluminium Doors / windows (sliding/movable) /mesh windows /ventilators/ top hung/ fixed / grill/ adjustable louvered/ windows/ fixed partitions as per drawing of approved manufactures with extruded sections of Jindal / Indal / Aluminax make using sections with size and weights as shown in the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S specifications with all approved Bronze anodised aluminium fittings and accessories, locking arrangements, 2 / 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the drawing, including providing and fixing aluminium channel beading / glazing clips fixed with necessary bronze anodised screws, grouting the gap with filler of thermocole beading /polymer variety & GE sealant etc. all complete generally as per drawings, specifications etc., all as directed by Engineer in charge. but excluding the cost of glazing, which will be paid separately. NOTE: Approval of the Dept. for the complete design and shop drawing shall be obtained before commencement of the work.
30
-
-
... More
Providing and fixing glazing with 4mm thick plain float glass of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing and as directed for window shutters and ventilators.
3
-
-
... More
Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked of thickness upto 12 mm.
5
-
-
... More
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/black),comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length
600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-Charge.
With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles
167
-
-
... More
Removing existing wooden/steel /aluminium/UPVC doors, windows, ventilators etc., including shutters, frames architraves, holdfasts etc., very carefully without damaging the frame shutters glass, etc., and transporintg the dismantled doors, windows, ventilators immediately to the departmnetal stores within NFC premises cleaning, disposing of unserviceable materials within a lead of 50 mts complete as directed
40
-
-
... More
Supplying and fixing at and at all heights above plinth level hydraulic door closers of ‘EVERITE’/Godrej make or approved equivalent suitable for doors weighing upto 80kg confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed.
4
-
-
... More
Supplying and fixing only approved anodized extruded aluminium heavy quality butt hinges generally conforming to IS specifications CLASSIC, JYOTHI make or approved equivalent make) of size100X75X4mm with cadmium plated wood screws of appropriate size etc., complete as directed for doors etc.
12
-
-
... More
Supplying and fixing to doors at and at all heights above plinth level approved best quality anodized extruded aluminium hanging floor door stopper (twin rubber stopper) with rubber cushion (anodic coating not less than grade AC 10 as per IS 1868))transparent or dyed to required colour and shade, with necessary screws etc., complete for twin rubber stopper for all doors except toilet doors of quarters.
5
-
-
... More
Supplying and fixing to wooden doors /steel doors/aluminium partitions at and at all heights above plinth level approved 6 lever cylindrical mortice locks of Godrej /Everite make or approved equivalent make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortice lock handles of approved pattern of Godrej make or its approved equivalent make with approved cadmium plated brass screws of appropriate size etc., complete as directed to suit single/double shutters for all doors of guest house including toilets and all doors of quarters except toiliet & utility doors of quarters
3
-
-
... More
Supplying and fixing to wooden doors/steel doors/aluminium partitions etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its approved equivalent) with approved cadmium plated brass screws of appropriate size etc., complete as directed.
-
-
-
... More
a) using 250 mm long
8
-
-
... More
Supplying and fixing to wooden doors /steel doors/aluminium partitions at all heights above plinth level approved anodized extruded aluminium handles with round grip and face plate conforming to relevant IS specifications and with ISI marking ‘Classic’/JYOTHI or approved equivalent and of size 125 mm (grip) with approved cadmium plated screws of appropriate size etc., complete as directed.
8
-
-
... More
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge. Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
... More
Frame Size 65 x 100 mm
15
-
-
... More
Frame Size 50 x 100 mm
10
-
-
... More
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid decorative type flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Minimum compressive strength of 2200 N ( Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent. WPC is to be laminated with pvc foil of minimum 14 microns , thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, all as per direction of engineer in Charge.
-
-
-
... More
35 mm solid WPC flush door shutter-plain
12
-
-
... More
30mm solid WPC flush door shutter-plain
12
-
-
... More
Providing and fixing roller blinds of approved make as per the manufacturer's specifications with drive unit, end plug, support brackets, roller tube, bottom rail, ball chains. Drive unit to be of moulded plastic with straight rectangular support pin and inserted into the tube end. It shall be driven by a ball chain pulley and can be positioned at right or left side of the shade. The shade when lowering or raising shall automatically be lockable upon release of the ball chain by the means of friction lock. End plug shall be moulded by plastic locking pin. The plug shall be inserted into the tube end. Support brackets shall be of zinc plated steel and provided with moulded plastic cover and used in right and left hand position differentiated by the acceptance of the rectamgular drive unit support or the round idler plugin Roller tube shall be made out of roll formed steel with outer diameter 25mm. It should be suitably protected against corrosion, keyway integral with the tube to accomodate the spline.
30
-
-
... More
Supply and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire mesh with 1.4mm wide aperture, fixing the mesh in door/windows/aluminium frame, complete as directed by Engineer-in-charge.
15
-
-
... More
Providing and fixing at all heights sun control film of reflective type to the glass panes of windows. Manufactured by M/s. Gareware or its approved equivalent of required shade including cutting to required size, fixing the film without any wrinkles, removing any existing film, cleaning the glass along with paints if any thoroughly on both sides complete as per manufacturers’ specifications and as directed by the Engineer-in-Charge.
30
-
-
... More
Supplying and installing factory made steel window of TATA pravesh vista series or approved equivalent make with dual slide and swing functionality fitted with twin gas spring and PU foam gasket, MS safety grills, retractable fibre mosquito nets, 5mm branded clear float glass/ tinted glass, brass tower bolts with SS plates, heavy duty hanging roller, SS lift off hinges, 1 mm galvanized steel with weather resistant pure polyester powder coating including filling the gaps with slicon sealant as per directions of EIC.
17
-
-
... More
Repair works
-
-
-
... More
Anti-corrosive Primer for Reinforcement:
Providing and applying Pidilite Industries Limited's make- Dr. Fixit Zinc Rich Primer /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make which confirms to BS 4652 1995 Specification for Metallic Zinc Rich Priming paint Type 2 and mixing mechanically until it is homogenous and applying the same as one rich coat on reinforcement complete with all lift etc. complete. (If corrosion found on rebars)
5
-
-
... More
Epoxy Bonding Agent:
Providing and applying a coat of two-part solvent free epoxy resin based bonding agent Pidilite Industries Limited's make- Dr. Fixit Epoxy Bonding Agent /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make shall be having Shear Bond strength as per ASTM C : 881 - Concrete failure, on the surface at rate of 2 Sqm/kg.
180
-
-
... More
Internal And External Crack Treatment:
Treatment for cracks in masonary walls and RCC slabs by chasing open it using electrical cutter machine to form a “V” space groove of approx. 15 mm wide and 15 mm deep. The groove shall be cleaned with compressed air and thereafter sealed with polymer modified mortar of CM 1:4 which shall be admixed with Pidilite Industries Limited's make- Dr. Fixit Pidicrete URP/equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make @ 2kg per bag of cement. All complete as per the engineer incharge.
80
-
-
... More
Flooring Works
-
-
-
... More
Providing and laying 40mm thick Cement concrete screed flooring and skirting with cement concrete 1:2:4, using 10mm and below size hard broken aggregate including providing and application of non – metallic floor hardener of M/s. Fosroc, Sika, STP, Pidilite, Armstrong or approved equivalent at spread rate of 7Kg/Sqm or as specified by manufacturer for heavy duty floor, compaction, finishing smooth by trowel to required levels or slope as specified, curing, rubbing the surface smooth, cleaning the surface neatly at the time of handing over the area complete all as per specifications and as directed by the Engineer
165
-
-
... More
Providing and laying Double charged/ glazed/ non-skid/matt/rustic vitrified tiles polished finish of size of Tile 600 x 600 mm in floor of thick ness as per manufacturers specifications of 1st quality of make Khajharia,Johnson, Somani and Rak s or equivalent approved make with water absorption less than 0.08% and conforming to S:15622, in all colours and shade, jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.
Note:
i) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
ii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
... More
a) In flooring with 600X600mm of double charged vitrified tile of with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477, in adequate thickness as required at site of make MYK Laticate,Mapei,Dr.Fixit,RAF or equivalent approved make.
33
-
-
... More
In skirting/dado of size 600X600mm tile with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477,in adequate thickness as required at site of make MYK Laticate,Mapei,Dr.Fixit,RAF or equivalent approved make.
77
-
-
... More
Extra for Grouting the tiles having 3 mm joint width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing instead of grouting the joints with white cement and matching pigments complete as per direction of Engineer-incharge.
110
-
-
... More
Extra for laying tiles on mix of cement mortar (1: 4) of thickness upto 20mm to provide requisite slope or levels.
110
-
-
... More
Finishing Works
-
-
-
... More
Providing and applying white cement based putty in two coats with average thickness not less than 1 mm, of Birla make or any other approved manufacturer, over the plastered wall surface (external/internal) including a coat of cement based primer to prepare the surface even and smooth complete.
293
-
-
... More
Painting with 3 coats of Premium Acrylic emulsion paint of interior grade Asian Paints Royale Shyne or equivalent in Berger/Nerolac makes of first quality and required shade over walls, ceilings etc.,(interior paint) including a coat of water thinnable cement based primer, sand papering, preparing the surface smooth including necessary repairs to scratches, filling in crevices, holes and cracks etc., with approved filler etc., complete all as specified and directed.
270
-
-
... More
Applying priming coats with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre of approved brand and manufacture including sand papering, preparing the surface smooth including necessary repairs to scratches, filling in crevices, holes and cracks etc., with approved filler etc., complete all as specified and directed.
563
-
-
... More
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives - Apex Ultima Protek of Asian paint or equivalent. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
270
-
-
... More
Painting wooden and masonary surfaces with one coat of applicable primer and two coats of synthetic enamel paint Asian, Pidilite, Johnson & Nicklson, Nerolac, berger, of approved shade including preparing surfaces, cleaning, sand papering, including applying and filling crevices or wherever required suitable filler etc, scaffolding, cleaning, etc., complete.
20
-
-
... More
Hacking the existing cement, concrete floor surface at an average of 5 to 7 indentation of 3 to 5 mm deep per 50 sqcm with hacking hammers or chisels, cleaning the aears, disposing the debris within a lead of 50 m etc., complete.
167
-
-
... More
Removing dry or oil bound distemper, white or colour wash/lime punning/ water proofing cement paint and the like by scrapping, sand papering, buffing using manual/mechanical methods and preparing the surface smooth including necessary repairs to scratches etc. complete as per directions of EIC
563
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be
stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding in excess of 10m height shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
120
-
-
... More
Plumbing and sanitation Works
-
-
-
... More
Providing and fixing 110 mm n.b.un-plasticised PVC rain water pipes and bends with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
16
-
-
... More
Providing & laying structured wall UPVC under ground drainage pipes & fittings (SN-8) of Ashirvad/Supreme make for sewer lines of following size conforming to IS:16098 (Part-1) to proper level & grade, jointing including providing coupler with cement solvent / welded joints / as per manufacturer's requirement, UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc, complete as specified and directed
-
-
-
... More
160 mm DN
80
-
-
... More
Providing and fixing of best quality PVC P trap for urinals of size 110mm X 110mm of Ashirvad (70002811)/Supreme make or approved equivalent with CP grating on top including necessary 1:2:4 cement concrete for embedding the trap connecting the trap to waste pipe, etc, complete as specified and directed.
2
-
-
... More
Providing uPVC Floor Trap / Nahani Trap of following size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed
-
-
-
... More
Nahani Trap of 110 X 75mm size of Ashirvad (70001249)/Supreme make
3
-
-
... More
Dismantling of old IWC/EWC and "S" or "P" trap at site including removal of cistern if required, complete with disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge
2
-
-
... More
Providing and fixing EUROPEAN WATER CLOSET of size close to the dimensions 350mmX480mmX395mm of Jaquar (CNS-WHT-551PSPP/551SSPP)/Parryware make/Hindware or approved equivalent , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required, as specified and directed
1
-
-
... More
Providing and fixing approved ORRISA PATTERN W.C. of soze close to 580mm X 440mm of Parryware /Hindware(Cat no. 20042) or approved equivalent in white glazed vitreous chinaware, size 530 mm x 410 mm with 'P' or 'S' trap, conforming to IS: 2556.
1
-
-
... More
Providing and fixing single flush PVC low level flushing cistern of 10 litres capacity conforming to IS: 7231 (Cico/Jaquar/Hindware(Cat no. C-1010)/Parryware make) with all internal PVC fittings mounted on a pair of brackets of heavy quality with 32 mm n. b. PVC flush pipe with bend of required length with all tools, synthetic adhesive, gasket etc. removing the existing cistern if required, complete including connection to W. C.
2
-
-
... More
Providing and fixingin toilets Health faucet of Parryware Make /Hindware/Jaquar (ALD-CHR-573) or equivelent with 1.2 meter long flexible tube or as per manufacturer's specifications in Chrome finish and wall hook etc. complete as directed..
1
-
-
... More
Providing and fixing 15 mm n. b. heavy quality PVC connctor pipesuitable for hot and cold water for Cisterns, Wash basins, gyesers, urinals of suitable length with CP brass unions ends of ZOLOTO/PARRYWARE/HINDWARE/JAQUAR make.
6
-
-
... More
Providing and fixing URINAL of size close to 385 mm x 325 mm x 635 mm of M/s.Jaquar(URS-WHT-13253N)/Parryware /Hindware make screwed to wall/dado with full threaded C.P. brass waste coupling to urinal, spreader, drain pipe, PVC connector pipe etc. removing the existing urinal if required, complete as specified.
2
-
-
... More
Providing and fixing in position of best quality rectangular shaped urinal PARTITION with frosted glass (8mm thick) of size 450mmX900MM of Jaquar (JSE-CHR-810US450X)/Hindware/Paryware make or approved equivalent, inclusing removing of existing partition if required as directed by Engineer-in-charge.
2
-
-
... More
Providing and fixing best quality WASH BASIN of size 630mm X 450 mm including half pedestal, comprising best Indian make (Hindware (Cat no 10001)/Parryware/Jaquer wash basin white glazed, vitreous chinaware conforming to IS: 2556 Part IV supported on suitable wall brackets of heavy quality and of size mentioned above, including CP brass waste coupling, removing of existing wash basin if required as directed by Engineer-in-charge.
1
-
-
... More
Providing and fixing CP Brass 32mm size heavy quality Bottle Trap of approved quality & make Jaquar (ALD-CHR-769L)/Parryware/ Hindware or approved equivalent, inluding extension pipe if required, removal of existing bottle trap if required, as per the direction of Engineer-in-charge.
3
-
-
... More
Providing and fixing heavy quality half threaded/full threaded C. P. brass waste coupling of size 32mm of make JaquarParryware/Hindware or approved make.
3
-
-
... More
Providing and fixing heavy quality 15mm C. P. brass wall mounted BIB TAPS of Hindware (Cat no. F730041)/Jaquar/Parryware/Jaquar make or equivalent with wall flange confirming to IS:8931.
3
-
-
... More
Providing and fixing heavy quality 15 mm C. P. brass Pillar cock of Jaquar/Parryware /Hindware make (F730002CP) or equivalent confirming to IS:8931.
2
-
-
... More
Providing and fixing heavy quality 15 mm C. P. brass 2 way bib cock of Parryware /Hindware/Jaquar make (F330004CP) or equivalent with wall flange and confirming to IS:8931.
1
-
-
... More
Providing and fixing 15 mm n. b. heavy quality C. P. brass angle valve confirming to IS 8931 of make Parryware Code /hindware (F730039CP)/Jaquar or equivalent.
5
-
-
... More
Providing and fixing 15 mm n. b. heavy quality C. P. brass Push Type urinal angle valve confirming to IS 8931 of make Jaquar/Parryware/hindware or equivalent.
2
-
-
... More
Providing and fixing heavy quality 15 mm C. P. brass Concealed stop cock of Jaquar/Parryware /Hindware (Cat no F730013CP) make or equivalent with wall flange and confirming to IS:8931.
2
-
-
... More
Providing and fixing CP brass soap dish of make Parryware Code /hindware/Jaquar or equivalent.
4
-
-
... More
Providing and fixing 150X150 mm recessed type CP brass Toilet Paper Roll Holder with cover of Parryware make/Hindware/Jaquar or equivalent as specified and directed
1
-
-
... More
Providing and fixing SS 304 Cloth Hanger with four hooks, fixed to wall or doors with C. P. brass screws, screwed on to rawl plugs etc., complete as directed by Emgineer-in-charge.
2
-
-
... More
Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete
1
-
-
... More
Providing and fixing movable grab bar for differently abled of Dolphy make (DHGB0012) or approved equivalent of size 600mm consisting of stainless steel tube with nylon grip, complete as directed by Engineer-in-charge.
1
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11) conforming to IS 15778 of Ashirvad/Supreme or approved make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe on exposed/recessed/underground surfaces to correct line, level, plumb using clamps as directed. This includes removing of existing pipes and fixtures if required, jointing of pipes & fittings with one step CPVC solvent cement, teflon tape, cost of cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition including testing of joints at cerain locations complete as specified and directed
-
-
-
... More
15 mm dia-concealed including cutting chases and making good the walls etc
8
-
-
... More
20mm dia-concealed including cutting chases and making good the walls etc
30
-
-
... More
25mm dia-concealed including cutting chases and making good the walls etc
30
-
-
... More
15mm dia on exposed surface
10
-
-
... More
20mm dia on exposed surface
30
-
-
... More
25mm dia on exposed surface
30
-
-
... More
32mm dia on exposed surface
30
-
-
... More
Providing and fixing in position CPVC ball valves of following sizes of Ashirvad/Supreme make confirming to SDR 11 fittings, including jointing material etc, as specified and directed.
-
-
-
... More
20 mm DN
1
-
-
... More
25 mm DN
2
-
-
... More
32 mm DN
1
-
-
... More
Supplying and fixing following size uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) of Grade B laid in floor & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, clamps, etc, complete as specified and directed.
-
-
-
... More
50 mm DN
5
-
-
... More
75 mm DN
10
-
-
... More
110 mm DN
10
-
-
... More
160 mm DN
10
-
-
... More
Providing, laying, jointing, fixing, testing and painting as per color code of NFC heavy quality (Class ‘C’) M. S. GALVANISED PIPES as per IS:1239 (TATA/Jindal or equivalent make) including heavy quality HB fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other fittings required for the completion except screwed flanges confirming to IS:1239 and also as per the code of practice of water supply in buildings IS:2065 including removing of exisitng G.I. pipes and fixtures if any, laying under the floors, making holes/chasing in walls, roof slabs and making good the same to the original condition including cost of all jointing material like hemp yarn, white or red lead/Teflon tape, clamps, wooden gutties, screws, cement and painting with two coats of anticorrosive bitumastic paint for embedded portion and two coats of synthetic enamel paint over a coat of zinc chromate/red oxide primer etc., complete including pressure testing the pipes with clean water as per specifications and connecting to existing supply lines or fittings and fixtures as the case may be.
-
-
-
... More
15 mm n. b.
5
-
-
... More
20 mm n. b.
10
-
-
... More
25 mm n. b.
5
-
-
... More
32 mm n. b.
5
-
-
... More
Supplying, lowering, laying below mentioned nominal bore RCC SPUN PIPES (Class NP2) conforming to IS:458 with necessary collars, laid to correct grade, slope and level at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and Cement Mortar 1:2, caulking the joints, finishing, curing, etc., complete as specified and directed.
-
-
-
... More
300 mm dia. R.C.C. pipe
6
-
-
... More
Careful Removal of water tank of capacity upto 10 kL from heights of upto 15 m and taking down to ground level including the cost of removing all plumbing fittings, fixtures, float valves, disconnecting the pipes and dummying of supply pipe lines etc and handing to department stores as directed by EIC.
2
-
-
... More
Providing hoisting and installing at required elevation minimum three layered moulded HDPE cylindrical vertical water storage tanks of required capacity of Sintex or Duracon make, with suitable SMC cover at top, coated with UV coating/layer including the cost of labour for making hole in the storage tank for inlet, outlet, scour and overflow and the required fittings/ gaskets, float valve including making necessary supporting system complete as directed Note: All the installatons/fittings shall be suitable to SS Pipe of cooling water lines, tenderer may quote accodingly.
2000
-
-
... More
Providing and fixing Heavy duty (HD-20) C.I.cover with frame of double seal pattern of required size and shape conforming to IS 1726, painting with two coats of bitumastic paint, placing over the RCC slab etc. complete as directed by Engineer-in-charge
200
-
-
... More
Dismantling Works
-
-
-
... More
Removing the wooden/WPC door shutter from door frame, including carefully disconnecting of hinges and door closer from the shutter, removing the door stopper, cutting the door shutter from below as per the available height of door frame after tiling in the room, refixing of the door shutter to the door frame and connecting the hinges, door closer and door stopper with the door shutter, complete as directed by Engineer-in-charge.
5
-
-
... More
Transportation of removed damaged/corroded doors, windows and clerestory windows (steel /aluminium/ wood) shutter including chowkhats,architrave, holdfasts etc., carriage of debris by engaging tractor trolley including cost of fuel, wages of driver and required manpower for loading, transporting up to a lead of 2.0 KM, unloading and stacking in the placed shown by Engineer-in-Charge complete as directed.Note: The size of tractor trolley shall not be less than 3.00 m x 1.90 m x 0.80 m.
3
-
-
... More
Removing carefully existing chainlink fabric from angle iron posts and struts by removing hook bolts, nuts, etc, straightening GI rods (vertical as well as horizontals) etc., rolling back the removed chainlink, collecting hooks, bolts and nuts, stacking including cutting of iron angle posts, dismantling of PCC pedestals, transporting the materials to Departmental stores etc., complete as directed by Engineer-in-charge. Note: Area of the chain link fabric will be measured for payment.
80
-
-
... More
Removing the existing broken/cracked A.C. roofing Sheets,ridges, hips, vallys, gutters, FRP roofing sheets etc., including G.I. Bolts, Nuts, washers and bitumen washers etc. carefully including required scaffolding and stacking the materials at a lead of 1.0 km as directed by Engineer-in- charge.
20
-
-
... More
Dismantling/breaking the existing plain cement concrete surfaces carefully in flooring, ramp etc. to the required size, using pneumatic cutters or any approved means including disposing of debris within a distance of 50 m etc., complete as specified and directed.
5
-
-
... More
Dismantling very carefully the existing reinforced cement concrete at all depths and heights below and above plinth level using pneumatic cutters or any approved means including cutting the reinforcement and transporting bars to departmental stores disposing the debris within the lead of 50 m complete as specified and directed
5
-
-
... More
DISMANTLING THE Acid tile/ceramic tile/vitrified tile etc. in flooring/ skirting and dado including dismantling of bedding mortar, stacking of materials within 50 metres lead and disposing of debris within 50 m lead. etc., complete as specified and directed.
150
-
-
... More
DISMANTLING OLD PLASTER OR SKIRTING, raking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead. etc., complete as specified and directed.
80
-
-
... More
Dismantling very carefully the existing Brick masonry in cement motor with plastering on both sides very carefully at depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacking of useful materials and disposing the unserviceable debris within the lead of 50m, etc., complete as specified and directed.
15
-
-
... More
Dismantling very carefully the existing structural steel work at all levels in MS structural sections like angles, channels, MS plain/chequered plates, flats, etc., including scaffolding, cutting of structural steel members by gas cutters or by any approved method, removing the nuts, bolts etc., as required, lowering stacking the reusable material at site and transporting the material to Departmental stores etc., complete as directed
200
-
-
... More
Dismantling very carefully the existing RR masonry in drain etc below/above FFL at all depths and heights including erection of suitable scaffolding, stacking of useful materials and disposing the the unserviceable debris within the lead of 50m etc., complete as specified and directed,
2
-
-
... More
Dismantling aluminium/ Gypsum partitions/ windows/ doors, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge
10
-
-
... More
Dismantling manually/ by mechanical means the existing bituminous road upto required depth including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge .
20
-
-
... More
Dismantling and stacking within 50 metres lead, T or L iron or pipe fencing posts or struts including all earth work and dismantling of concrete etc. in base of.
20
-
-
... More
Making holes in brick walls(upto thickness 350mm) upto size of 750 mm diameter for exhaust fans at height upto 15 m from ground level.
4
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%