Nuclear Fuel Complex Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date29 Dec 2022
Closing Date6 Feb 2023
Tender Amount₹ 3,90,00,000
Costs
EMD
₹ 7,80,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2022_NFC_731723_1Bid Award Id
ViewTender No
C/1295/2022Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Excavation in TRENCHES for pipes, sewers, etc in all soils except soft and hard rock from average ground level including dewatering if necessary, dressing bottom to required level, profile/slope, back filling in trenches with selected excavated materials in layers not exceeding 250 mm, consolidating, leveling, clearing of all the areas involving excavation of all grass,rank vegetation, shrubs,bushes,cutting of trees upto 300mm grith measured at 1.0 mtr above ground level disposing the spoil within a distance of 50m for ,storm water drains, electrical cables trenches etc.,
-
-
-
... More
a) Upto 1.50 m depth from average ground level
60
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
15
-
-
... More
Filling available excavated earth (excluding rock) in trenches , plinth , sides of foundation etc.., in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50m and lift upto 1.5m.
10
-
-
... More
Lead charges, including loading, unloading, stacking, the disposable Earth, rock, concrete, brick etc. by Mechanical transport for lead up to 2 KM. Note: Measurement of lead charges will be based on truck measurements with deduction of voids @20% and 50% for soils and rocks or debris respectively.
10
-
-
... More
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level, vertical, horizontal, inclined including strutting, propping using steel pipes/acro stagging, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed for Foundation, pedestals, plinth beams, etc.,
-
-
-
... More
a) Below and Upto Finish Floor Level
25
-
-
... More
b) Above Finish Floor Level
10
-
-
... More
CEMENT CONCRETE of following mix using Pazzolona Portland Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Raasi, Birla, Coramandal, M/s. Andhra Cement Ltd., KCP), crushed sand and graded stone aggregates of 20 mm maximum size at and at all depths below plinth level including consolidation, finishing, curing, etc., complete but excluding formwork as per specifications.
-
-
-
... More
1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)
10
-
-
... More
1:3:6 (1 Cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size)
20
-
-
... More
Reinforced Cement Concrete by insitu mixing by WEIGH BATCHING or RMC of Ultra Tech, Birla Ready Mix make of Grade M - 25 (Minimum Cement Content – 330Kg/Cum) using Portland Pozzolana Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with graded stone aggregate of 20mm maximum size and sand at and at all depths and heights including mixing with superplasticizer of make M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturer’s Specifications, conveying / pumping / placing at all depths / heights below / above plinth level, consolidation, finishing as specified, curing, etc., including providing and placing cover blocks of required sizes in cement mortar 1:1, etc., but excluding Formwork and Steel Reinforcement complete as specified and directed. NOTE:-The concrete of RCC of any grade if it is insitu (site mix) the sand to be used shall be River sand. In case of RMC, the manufactured sand. The blended cement i.e., PPC shall not have more than 35% of pozzolanas.
-
-
-
... More
a) Below FFL
8
-
-
... More
b) Above FFL
15
-
-
... More
Construction of rectangular CHAMBERS of internal clear dimension of mentioned below ( internal clear) in 230 mm thick brick masonry in cement mortar 1:6 over a bed of 150 mm thick 1:4:8 cement concrete in foundation, plastering with cement mortar 1:4, 20 mm thick on inside, and all outside exposed surfaces finished with a floating coat of neat cement, 1:2:4 cement concrete for benching in slope 1 in 30 and channel finished with neat cement, brick corbelling at top if necessary to provide clear opening and providing and fixing CI cover with frame of light duty single seal pattern weight not less than 33 kgs embedded in cement concrete 1:2:4, providing and fixing PVC encaptualted MS rungs of 20mm square, each at 300 mm centre to centre if depth exceeds 800 mm, painting CI cover and frame and CI steps with two coats of bitumastic paint etc. complete-For depth of chamber not exceeding 900 mm. However minimum depth of chamber not less than 450mm
-
-
-
... More
a) 450x600mm
3
-
-
... More
b) 600x900mm
2
-
-
... More
Extra over above item for depths beyond 450 mm of Rectangular chamber including providing and fixing PVC encaptulate MS rungs 200 square, each @ 300 mm C/C, staggered vertically and horizontally etc., as per specifications.
-
-
-
... More
a) 450x600mm
6
-
-
... More
b) 600x900mm
4
-
-
... More
Providing and laying autoclaved aerated cement blocks masonry with 150/230/300 mm thick or other required size AAC blocks of make M/s NCL, Aerocon, Greenstone in super structure below and above plinth level up to floor V level with approved block laying polymer modified adhesive mortar or in cement mortar 1:4 (1 cement : 4 coarse sand), complete as directed.
10
-
-
... More
Brick work as per IS 2212 using fly ash bricks conforming to IS 12894 of Class Designation 7.5 and above as specified at all height and depths with cement mortar 1:6 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 6 crushed Sand} including raking out joints and simultaneously pointing the joints with the same mortar, curing, scaffolding etc., complete as specified and directed.
25
-
-
... More
HALF BRICK masonry as per IS 2212 using fly ash bricks conforming to IS 12894 of class designation 7.5 or above as specified in partitions walls in cement mortar 1:4 (1 cement: 4 crushed sand), including scaffolding, raking out joints, curing etc. complete and with Reinforced Cement Concrete (RCC) M15 (1:2:4) stiffeners of depth 75mm at every 900 mm height including form work, curing etc., complete as specified and directed, but excluding reinforcement. Note: Reinforcement will be measured and paid for separately under relevant item of schedule.
150
-
-
... More
Filling in bath, W/C, toilet, depressed areas with water proofing brick bat coba of the agency approved by the Dept. at all floors and locations upto the required level and making the surface finished suitable to receive floor finish etc. all complete as per drawings and water proofing agency's specifications & as directed by the Engineer in charge.
50
-
-
... More
Cement plastering 15 mm thick for internal walls in cement morar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 4 River Sand} fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC and also other places wherever required over brick walls or concrete surface preparation of surface, steel/tubular scaffolding curing etc., complete as specified and directed.
500
-
-
... More
Cement plastering 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level with base coat in Cement Mortar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 4 River Sand} 12mm thick and finishing coat in Cement Mortar1:3 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 3 River Sand} 8mm thick final rendering including addition of approved integrated waterproofing compound @ 2% by weight of cement or as per manufacturer’s Specifications for the base coat of make M/s. Fosroc/Demech/ Huntsman/ Pidilite/ SIKA Qualcrete / MBT/Sunanda Chemicals, making necessary grooves, bands, drip moulds, etc., as required, double steel/tubular scaffolding wherever necessary, curing, etc., complete as specified and directed.
100
-
-
... More
Making good the damaged portion of walls with cement mortar mix (1 cement: 4 coarse sand) of thickness 20mm to 40mm at all height above plinth level over brick walls or concrete surface to restore the level of surface after removal of wall tiles/replacement of pipeline, including fixing of chicken mesh, hacking over surfaces wherever required, scaffolding curing etc., complete as specified and directed.
65
-
-
... More
Applying 2 (Two) coats of ready made putty of average thickness 1 mm of Birla wall care/J.K. Wall putty over plastered wall surface including cleaning the surface with steel scrapper, wire brush, sand paper etc., filling in crevices, holes, cracks with approved filler etc., finishing the surface neat and smooth without any undulations as specified and directed at all height including required scaffolding. Note :- Rates are inclusive of scaffolding required at all heights.
16500
-
-
... More
Painting with 3 coats ( including a coat of cement primer of approved make) of antifungal Acrylic emulsion paint having 100% acrylic with silicon additives of Asian paints (Ultima) or equivalent quality paint from /Berger/Nerolac makes of first quality and required shade over walls, ceilings etc., including scaffolding, preparing the surface smooth by scrapping, sand papering, necessary repairs to scratches, filling in crevices, holes and cracks etc., with approved filler etc., complete all as specified and directed. Note:-
1. Removing old paint by using scrubbing machine, preparing the surface smooth including necessary repairs to scratches etc. complete is also included. 2. Rates are inclusive of scaffolding required at all heights.
300
-
-
... More
Painting with 1st quality acrylic distemper (ready mixed)(including 1 coat of primer) having VOC content less than 50 gms/litre of approved brand and manufacture (equivalent product- Apcolite premium emlsion) paint of Asian, Pidilite, Johnson & Nicklson, Nerolac, berger,including applying additional coats wherever required to achieve even shade and colour. Note:- 1. Rates should be qouted inclusive of 1 coat of primer and removing old paint by using scrubbing machine, preparing the surface smooth including necessary repairs to scratches etc. complete is also included.
2. Rates are inclusive of scaffolding required at all heights.
16500
-
-
... More
Painting with synthetic enamel paint in 3 ( three ) coats including a coat of appropriate primer of Asian/Berger/Nerolac make of 1st quality with required shade on walls, concrete surfaces, wooden/steel doors, windows, ventilators, composite units, louvers, rolling shutters, hand rail and balustrades, plastered surfaces etc., including scaffolding, preparing the existing surface smooth by sand papering, preparing the surface, brushing with wire brushes, scraping with steel scrapper etc., filling in crevices and cracks etc. with approved filler etc., complete as specified and directed. Note:-
1. Removing old paint by using scrubbing machine, preparing the surface smooth including necessary repairs to scratches etc. complete is also included.
2. Rates are inclusive of scaffolding required at all heights.
250
-
-
... More
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level with high yield strength deformed bars confirming to IS 1786 with TM Treated steel of Tata, Vizag,Sail make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed by Engineer-in-charge.
2000
-
-
... More
Providing and laying Fully body/Double charged vitrified tile polished finish of size of Tile 600 x 600 mm in floor having thickness as per manufacture specifications thick tiles of 1st quality, non-skid, matt finish and non slipperry, double charged , of make Khajharia,Johnson,Somani and Rak s or equivalent approved make with water absorption less than 0.08% and conforming to S:15622,in all colours and shade, jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.
Note:
i) Quoted rate shall include extra adhesive required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
iv)No Spacer should be placed . Do grouting with matching adhesive.
-
-
-
... More
a) In flooring with rustic/matt/glossy finished 600X600mm of full body /double charged vitrified tile of make Somany/Kajari or approved equivalent laid with Flooring with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477, in adequate thickness as required at site of make MYK Laticrete,Mapei,Dr.Fixit,Roff or equivalent approved make.
1700
-
-
... More
b) In skirting/dado of size 600X600mm tile with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477,in adequate thickness as required at site of make MYK Laticrete,Mapei,Dr.Fixit Roff or equivalent approved make.
2300
-
-
... More
Providing and laying Premium Double charged/Full body vitrified tile polished finish of size of Tile 600 x 1200 mm (having thickness as per manufacture specifications) of 1st quality, non-skid, matt finish and non slipperry, double charged/full body , of make Khajharia,Johnson, Somani and Rak s or equivalent approved make with water absorption less than 0.08% and conforming to S:15622, in all colours and shade, jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.
Note:-
i) Quoted rate shall include extra adhesive required to match the water proofing plaster if any to maintain the lines
and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the
required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The
tenderer may note the same and quote accordingly.
iv)No Spacer should be placed . Do grouting with matching adhesive.
-
-
-
... More
In flooring with rustic/matt /glossy finished 600X1200mm of double charged vitrified tile in Flooring with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477, in adequate thickness as required at site of make MYK Laticrete,Mapei,Dr.Fixit Roff or equivalent approved make.
4000
-
-
... More
In skirting/dado of size 600X1200mm tile with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477,in adequate thickness as required at site of make MYK Laticrete,Mapei,Dr.Fixit Roff or equivalent approved make.
500
-
-
... More
Hacking the existing cement, concrete floor/dado surface at an average of 5 to 7 indentation of 3 to 5 mm deep per 50 sqcm with hacking hammers or chisels, cleaning the aears, disposing the debris within a lead of 50 m etc., complete.
6000
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone for treads/ risers /steps / ramps /wall of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
300
-
-
... More
Providing nosing and groove cutting (3 Nos. Parallel Groove throughout the length for each step) for treads to stones like marble, granite and kota etc to the required shape etc. complete as specified and directed
280
-
-
... More
Kota stone slab flooring of 25mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)
400
-
-
... More
Constructing wash basin platform of approximate width 600mm and maximum length upto 3 meters using two machine polished granite slabs (each 16mm to 18mm thick) fixed back to back with araldite including making openings in granite for under the counter wash basins, holes for pillar taps, moulding, rubbing and polishing of cut edges, making recess in the wall, inserting the platform in the wall till 40mm, grouting with cementious grout of Fosroc (Conbexrtra) or approved make, forming nosing at the edges of the counter, etc, complete as specified and directed.
75
-
-
... More
Providing and fixing factory made single extruded WPC (wood polymer composite) solid door/window frames/chowkhat of following sizes comprising of virgin PVC polymer of K value 57-60, calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives fabricated with mitered joints after applying PVC solvent Cement & screwed with full body threaded star headed SS screws having minimum frame density of 750 Kg/cum and manufactured by RAJSHRI or equivalent, screw withdrawl strength of 990N, minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of class A category with propoerty of being termite/borer proof, water/moisture proof and fire retardent and fixed in position with SS dash fastners/Hold fast of required dia and length, painting with required color, complete as directed. Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
... More
WPC door frame (100X65)
85
-
-
... More
Providing and fixing factory made Decorative (laminated)/Plain single extruded WPC (wood polymer composite) solid plain flush door shutter pf follwoing size comprising of virgin PVC polymer of K value 57-60, calcium carbonate and natural fibers (wood powder/rice husk/wheat husk) and non-toxic additives having minimum density of 650 kg/cum manufactured by RAJSHRI or equivalent, screw withdrawl strength of 1800N(Face) & 900N(Edge), minimum compressive strength of 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of class A category with propoerty of being termite/borer proof, water/moisture proof and fire retardent and fixing with Stainless steel butt hinges of required size with fully body threaded star headed counter sunk SS scews, including supplying and fixing of necessary fixtures such as aluminum tower bolts, round aluminum handles (both sides), aldrops (both sides), painting the door with required color, complete as directed. a) 30 mm thick.
-
-
-
... More
30mm solid WPC flush door shutter-plain
100
-
-
... More
Water proof plaster in cement mortar 1:3 ,with waterproofing compound make of ( M/s Fosroc , MBT, Sika, Sunanada Chemicals etc.) @ 2% by weight of cement including scaffolding, curing, hacking of concrete surfaces etc. Complete a) 15 MM thk for underground drains etc.
30
-
-
... More
Providing cement based waterproofing treatment to the sunken floor of water closets, bath rooms, nahanis from inside at all heights above plinth level/ lift area giving injections to the concrete surface as required with cement and approved waterproofing compound solution to fill up all inherent holes, voids, honey-combs, etc., in the concrete, applying waterproof plaster of about 25 mm thick for the floor area of the depression and about 18 mm on the side walls of the depression and continue the vertical treatment if necessary on the walls above proposed floor finish with making surface suitable and even to receive tiles, testing the treatment for water tightness by impounding water for 7 days etc., complete.
250
-
-
... More
Providing water proofing treatment to the roof/gutter or any other required surface with cold applied, Acrylic Elastomeric liquid membrane coating over one coat of crystallization coating system Pidilite / Fosroc / Cica in the following sequence:
a) Cleaning the surfaces from dirt, dust and other contaminations b) Identifying the areas of leakage by approved means, c) Pressure grouting the area of leakage with cement slurry admixed with expansive grouting additive of M/s. Fosroc / Pidilite (Dr FIxit Pidicrete AM) or its approved equivalent at a minimum one grout point per 2 Sq.m slab area.or as per site conditions). (d) Exposing, cleaning and filling cracks observed if any in RCC slab with polymer modified mortar compound/ PU sealent.
e) Pre wetting the surface of slab and application of one coat of crystallization coating of M/s Fosroc/Pdilite (Dr Fixit Polypus CP) or approved equivalent Applying two coats of Acrylic Elastomeric liquid membrane coating including prime coat of M/s Fosroc/PIdilte (Dr. fixit primeseal) or approved equivalent, two coats of Acrylic Elastomeric liquid membrane coating of M/s Fosroc/Pidilite (Dr. FIxit Roofseal Ultra) or its approved equivalent all as per approved manufacturer’s specifications and as directed by Engineer in Charge.
350
-
-
... More
Providing and fixing 160 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
75
-
-
... More
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11) conforming to IS 15778 of Ashirvad/Supreme or approved make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe on exposed/recessed/underground surfaces to correct line, level, plumb using clamps as directed. This includes removing of existing pipes and fixtures if required, jointing of pipes & fittings with one step CPVC solvent cement, teflon tape, cost of cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition including testing of joints at cerain locations complete as specified and directed
-
-
-
... More
20mm dia-concealed including cutting chases and making good the walls etc
300
-
-
... More
25mm dia-concealed including cutting chases and making good the walls etc
175
-
-
... More
32mm dia-concealed including cutting chases and making good the walls etc
120
-
-
... More
40mm dia-concealed including cutting chases and making good the walls etc
40
-
-
... More
50mm dia-on exposed surface
35
-
-
... More
Providing and fixing in position CPVC ball valves of following sizes of Ashirvad/Supreme make confirming to SDR 11 fittings, including jointing material etc, as specified and directed.
-
-
-
... More
20 mm DN
4
-
-
... More
25 mm DN
4
-
-
... More
40 mm DN
10
-
-
... More
50 mm DN
4
-
-
... More
Supplying and fixing following size uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) of Grade B laid in floor & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, etc, complete as specified and directed.
-
-
-
... More
75 mm DN
160
-
-
... More
110 mm DN
130
-
-
... More
Providing & laying UPVC under ground drainage pipes & Fittings of Sudhakar/Nandi/Godavari make for storm water drains& sewerage pipes of following size conforming to IS:15328 to proper level & grade, jointing including prviding coupler with cement solvent / welded joints / as per manufacturer's requirement, including encasing the pipe alround using cement concrete 1:3:6 complete to an offeset of D/2 where D= dia of pipe all as per specifictions, drawing and as directed by the E.I.C. item includes Providing and fixing UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc
-
-
-
... More
110 mm DN (SN 8kN/m²-SDR34)
75
-
-
... More
160 mm DN (SN 8kN/m²-SDR34)
150
-
-
... More
Providing and fixing in position UPVC bottle Gully Trap of Supreme (Product code NUPHGT110G)/Ashirvad make of size 200mmX160mm including embedding the trap in 1:2:4 cement concrete, construction of brick masonry chamber in 230 mm thick brick masonry in cement mortar 1:4 over cement concrete bed of 1:3:6 of 100 mm thick, embedding the trap, plastering with cement mortar 1:4, 12 mm thick on inside & outside and all exposed surfaces, finished with a floating coat of neat cement, providing and fixing heavy duty C. I. frame and cover of size 300mmX300mm, 40mm thick cement concrete 1:2:4 bed over brickwork, painting the grating frame and cover with 2 coats of approved anticorrosive bitumastic paint, necessary connection with existing line etc., complete as directed
10
-
-
... More
Providing uPVC Floor Trap / Nahani Trap of following size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed
-
-
-
... More
Nahani Trap of 110 X 75mm size of Ashirvad (70001249)/Supreme make
40
-
-
... More
Multifloor trap of 110 x 75 x 50 mm size of Ashirvad (70001252)/Supreme make
10
-
-
... More
Providing and fixing of best quality PVC P trap for urinals of size 110mm X 110mm of Ashirvad (70002811)/Supreme make or approved equivalent with CP grating on top including necessary 1:2:4 cement concrete for embedding the trap connecting the trap to waste pipe, etc, complete as specified and directed.
10
-
-
... More
Providing and fixing EUROPEAN WATER CLOSET of size close to the dimensions 350mmX480mmX395mm of Jaquar (CNS-WHT-551PSPP/551SSPP)/Parryware make/Hindware or approved equivalent , in white glazed vitreous, with integral 'P' or 'S' trap, Solid plastic heavy quality seat with lid of approved make and Colour with C.P.brass hinges, conforming to IS: 2548 (Part I & II), including cutting and making good floor, wall wherever required, as specified and directed
10
-
-
... More
Providing and fixing single flush PVC low level flushing cistern of 10 litres capacity conforming to IS: 7231 (Cico/Jaquar/Hindware(Cat no. C-1010)/Parryware make) with all internal PVC fittings mounted on a pair of brackets of heavy quality with 32 mm n. b. PVC flush pipe with bend of required length with all tools, synthetic adhesive, gasket etc. removing the existing cistern if required, complete including connection to W. C.
20
-
-
... More
Providing and fixing approved ORRISA PATTERN W.C. of size close to 580mm X 440mm of Parryware /Hindware(Cat no. 20042) or approved equivalent in white glazed vitreous chinaware with 'P' or 'S' trap, conforming to IS: 2556.
10
-
-
... More
Providing & fixing vitreous China undercounter/Overcounter Wash hand basin consisting following items of work:- i)Providing vitreous china wash basin conforming to IS 2556 ( part - IV ) and placing the wash basin in position as shown in the drawing or as directed. ii) Providing a pair of either cast iron built - in cantilever type brackets weighing not less than 1.5 kg / each to be embedded in grade M 15 (or the one best suites)cement concrete block of size 100 X 75 X 150 mm or cast iron wall fixing cantilever type brackets weighing not less than 1kg / each with screw holes to be fixed to wall using screws, rawl plugs etc. to support the Wash basin, conforming to IS 775 for Wall hung basin.( For wall hung wash basin) iii) Fixing Vitreous China under / over the counter / semi recessed type Wash Basin and placing it in position over the granite platform as shown in the drawing or as directed including finishing the joints with white cement all complete. ( For under/over counter wash basin ) iv) Cutting holes or chases in wall & reinstating to its original condition, painting all metallic parts with two coats of approved flat oil paint over a coat of primer, finishing the gap with white / matching cement etc.all as per specification and as directed for wall hung basin.. v) Installation and testing the entire assembly to the full satisfaction of Engineer- in- charge.
-
-
-
... More
Providing and fixing best quality vitreous chinaware under the counter WASH BASIN of size close to 605mm x 430 mm x 200mm , of make Jaquar(CNS-WHT-705)/Hindware/Parryware conforming to IS: 2556 Part IV including CP brass waste coupling, necessary supports, removal of wxisting wash basin if required, complete as specified and directed.
15
-
-
... More
Providing and fixing URINAL of size close to 385 mm x 325 mm x 635 mm of M/s.Jaquar(URS-WHT-13253N)/Parryware /Hindware make screwed to wall/dado with full threaded C.P. brass waste coupling to urinal, spreader, drain pipe etc. removing the existing urinal if required, complete as specified
20
-
-
... More
Providing and fixing in position of best quality rectangular shaped urinal PARTITION with frosted glass (8mm thick) of size 450mmX900MM of Jaquar (JSE-CHR-810US450X)/Hindware/Paryware make or approved equivalent, inclusing removing of existing partition if required as directed by Engineer-in-charge.
14
-
-
... More
Providing and fixing full length 5mm thick mirror of saint gobain or equivalent with beveling and polishing including installation complete as directed by Engineer-in-charge.
30
-
-
... More
Providing and fixing heavy quality 15mm C. P. brass wall mounted BIB TAPS of Hindware (Cat no. F730041)/Jaquar/Parryware/Jaquar make or equivalent with wall flange confirming to IS:8931.
35
-
-
... More
Providing and fixing heavy quality 15 mm C. P. brass Pillar cock of Jaquar/Parryware /Hindware make (F730002CP) or equivalent confirming to IS:8931.
5
-
-
... More
Providing and fixing heavy quality 15 mm C. P. brass 2 way bib cock of Parryware /Hindware/Jaquar make (F330004CP) or equivalent with wall flange and confirming to IS:8931.
10
-
-
... More
Providing and fixingin toilets Health faucet of Parryware Make /Hindware/Jaquar (ALD-CHR-573) or equivelent with 1.2 meter long flexible tube or as per manufacturer's specifications in Chrome finish and wall hook etc. complete as directed..
10
-
-
... More
Providing and fixing CP Brass 32mm size heavy quality Bottle Trap of approved quality & make Jaquar (ALD-CHR-769L)/Parryware/ Hindware or approved equivalent, inluding extension pipe if required, removal of existing bottle trap if required, as per the direction of Engineer-in-charge.
35
-
-
... More
C.P brass single lever basin mixer of 'Jaquar' cat. No. ORM-10011B.and also removing the existing one if required.
15
-
-
... More
Providing and fixing 15 mm n. b. heavy quality PVC connector pipesuitable for hot and cold water for Cisterns, Wash basins, gyesers, urinals of suitable length with CP brass unions ends of ZOLOTO/PARRYWARE/HINDWARE/JAQUAR make.
10
-
-
... More
Supplying following C.P Brass Bathroom / toilet accessories of following make and fixing on the wall using CP brass screws, rawl plugs etc. as per manufacturer's requirement all complete at the locations shown and as directed by the Engineer-in-Charge.
-
-
-
... More
a) Providing and fixing 150X150 mm recessed type CP brass Toilet Paper Roll Holder with cover of Parryware make/Hindware/Jaquar or equivalent as specified and directed
8
-
-
... More
b) Providing and fixing C. P. brass TOWEL RAIL of approved design and make of 600mm length, fixed to wall with C. P. brass screws, screwed on to rawl plugs etc., complete of Parry- ware make/Hindware/Jaquar or equivalent.
15
-
-
... More
c) Liquid soap dispenser Jaquar CAN 1135N
15
-
-
... More
d) Providing and fixing CP brass soap dish of make Parryware Code /hindware/Jaquar or equivalent.
15
-
-
... More
e)Providing and fixing movable grab bar for differently abled of Dolphy make (DHGB0002) or approved equivalent of size 600mm consisting of stainless steel tube with nylon grip, complete as directed by Engineer-in-charge.
4
-
-
... More
Providing and fixing heavy quality half threaded/full threaded C. P. brass waste coupling of size 32mm of make JaquarParryware/Hindware or approved make.
25
-
-
... More
Providing and fixing 32mm/40mm dia flexible P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.
15
-
-
... More
Providing and fixing 15 mm n. b. heavy quality C. P. brass angle valve confirming to IS 8931 of make Parryware Code /hindware (F730039CP)/Jaquar or equivalent.
25
-
-
... More
Providing and fixing heavy quality 15 mm C. P. brass 3 in 1 wall mixer of Parryware/Hindware(F730020CP) wall flange and confirming to IS:8931.
3
-
-
... More
Providing and fixing heavy quality 15 mm C. P. brass Deck Mounted Sink Cock of Parryware/Hindware make (F730034CP) or equivalent confirming to IS:8931.
30
-
-
... More
Providing and fixing decorative round shaped C. P. brass SHOWER ROSE if dia 200mm without arm of make Jaquar/Parryware/ Hindware(F160125) or approved equivalent
3
-
-
... More
Providing and fixing decorative round shaped C. P. brass long shower arm of 450mm length of make Jaquar/Parryware/ Hindware or approved equivalent
3
-
-
... More
Providing and fixing C. P. brass Twin Robe Hook, fixed to wall with C. P. brass screws, screwed on to rawl plugs etc., complete of Parry- ware/Hindware/Jaquar or equivalent
10
-
-
... More
Providing and fixing SS 304 Cloth Hanger with four hooks, fixed to wall or doors with C. P. brass screws, screwed on to rawl plugs etc., complete as directed by Emgineer-in-charge.
10
-
-
... More
Dismantling/breaking the existing plain cement concrete surfaces carefully in flooring, ramp etc. to the required size, using pneumatic cutters or any approved means including disposing of debris within a distance of 50 m etc., complete as specified and directed.
10
-
-
... More
Dismantling very carefully the existing reinforced cement concrete at all depths and heights below and above plinth level using pneumatic cutters or any approved means including cutting the reinforcement and transporting bars to departmental stores disposing the debris within the lead of 50 m complete as specified and directed
50
-
-
... More
Dismantling very carefully the existing Brick masonry in cement motor with plastering on both sides very carefully at depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacing of useful materials and disposing the unserviceable debris within the lead of 50m, etc., complete as specified and directed.
180
-
-
... More
DISMANTLING THE CERAMIC TILE /KOTAH STONE/ VETRIFIED TILE etc. including dismantling of bedding mortar, stacking of materials within 50 metres lead and disposing of debris within 50 m lead. etc., complete as specified and directed.
2000
-
-
... More
DISMANTLING OLD PLASTER OR SKIRTING, raking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead. etc., complete as specified and directed.
700
-
-
... More
Removing existing wooden/steel /aluminium doors, windows, ventilators etc., including shutters, frames architraves, holdfasts etc., very carefully without damaging the frame shutters glass, etc., and transporintg the dismantled doors, windows, ventilators immediately to the departmnetal stores within NFC premises cleaning, disposing of unserviceable materials within a lead of 50 mts complete as directed
800
-
-
... More
Transportation of removed damaged/corroded doors, windows and clerestory windows (steel /aluminium/ wood) shutter including chowkhats,architrave, holdfasts etc., carriage of debris by engaging tractor trolley including cost of fuel, wages of driver and required manpower for loading, transporting up to a lead of 2.0 KM, unloading and stacking in the placed shown by Engineer-in-Charge complete as directed.Note: The size of tractor trolley shall not be less than 3.00 m x 1.90 m x 0.80 m.
100
-
-
... More
Removing and Resetting of material/furniture from each room /corridor/hall etc. Note :- Rate shall be quoted per Room basis
85
-
-
... More
Dismantling very carefully the existing Rain water pipe with fittings and clamps including stacking and disposing the the unserviceable debris within the lead of 50m etc., complete as specified and directed,
75
-
-
... More
Dismantling PH items and disposing the the unserviceable debris within the lead of 50m etc., including refilling the excavated gap complete as specified and directed.
-
-
-
... More
a) Manholes
3
-
-
... More
b) Gully trap
3
-
-
... More
c) Flushing Cisterns/ Urinals / partition /EWC/IWC/ Sink / Basin along with all fittings etc
90
-
-
... More
Dismantling very carefully the existing MS//CI pipe of various dia for various services/hand rail with all fittings and fixtures etc., and stacking with in a lead of 50 m.
-
-
-
... More
a) Upto 150 mm dia.
100
-
-
... More
Removing the wooden door shutter from door frame, including carefully disconnecting of hinges and door closer from the shutter, removing the door stopper, cutting the door shutter from below as per the available height of door frame after tiling in the room, refixing of the door shutter to the door frame and connecting the hinges, door closer and door stopper with the door shutter, complete as directed by Engineer-in-charge.
85
-
-
... More
Removal of existing GI pipes of upto 40mm mm n.b., excavating the equired length, cutting the pipe line after shutdown, handling over the pipe line to the departmental stores. Note: Earthwork excavation required for the work will be measured under relevant item.
180
-
-
... More
Transportation of removed damaged/corroded pipes etc., carriage of debris by engaging tractor trolley including cost of fuel, wages of driver and required manpower for loading, transporting up to a lead of 2.0 KM, unloading and stacking in the placed shown by Engineer-in-Charge complete as directed.Note: The size of tractor trolley shall not be less than 3.00 m x 1.90 m x 0.80 m.
10
-
-
... More
Providing and fixing CI gratings conforming to IS 1729 for rain water pipe entry mouths/filter bed, etc., including chasing making holes in existing masonry concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions, painting with two coats of bitumastic paint, all in level and line complete as directed and specified for rain water mouths, filter bed.
10
-
-
... More
Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using GI. Slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI. Adjustable rods with galvanised steelk level clips of size 85x30x0.8 mm, spaced at 1200 mm centre to centre along main 'T', bottom exposed with 24 mm of all 'T' sections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge.
500
-
-
... More
Providing and fixing factory made uPVC white colour sliding glazed two track two panels sliding window made of (small series) frame 52 x 44 mm &sash 32 x 60 mm both having wall thickness of 1.9 ± 0.2 mm and 5mm thick double glazing with 10mm gap filled with inert gas of argon or any equivalent. Window dimension comprising of uPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), appropriate dimension of uPVC extruded glazing beads and uPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.
525
-
-
... More
Providing and fixing factory made uPVC white colour casement/casement cum fixed glazed windows comprising of uPVC multi-chambered frame, sash and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), uPVC extruded glazing beads of appropriate dimension, EPDM gasket, stainless steel (SS 304 grade) friction hinges, zinc alloy (white powder coated) casement handles, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality,all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.
-
-
-
... More
Casement window single panel with S.S. friction hinges (300 x 19 x 1.9 mm), made of (small series) frame 47 x 50 mm & sash 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glass pane glazing bead of appropriate dimension.
85
-
-
... More
Casement window double panels with S.S. friction hinges (300 x 19 x 1.9 mm) made of (small series) frame 47 x 50 mm, sash 47 x 68 mm & mullion 47 x 68 mm all having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.
150
-
-
... More
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length
(shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all
corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all
complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
... More
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.
25
-
-
... More
Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-25 insitu mixing BY WEIGH BATCHER using Portland Slag Cement conforming to conforming to IS 455 Latest Edition (M/s. ACC, Ultra Tech,Chettinadu, Coramandal, KCP) , crushed sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches with and without holes. NOTE:- GGBS Pozzalanas should not be more than 50 % of weight of cement specified in the code and is of mixed at cement manufacture unit only
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements