Nuclear Fuel Complex Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Civil Works Others
Eprocure
Opening Date18 Jan 2025
Closing Soon4 Feb 2025
Tender Amount₹ 4,00,00,000
Technical
Technical
Bid Capacity
... View More
To determine the bid capacity required, we look at the financial requirements provided. The Earnest Money Deposit (EMD) is Rs. 8,00,000, and the Performance Guarantee is 5% of the tendered value. Given the estimated cost of the work is Rs. 4.00 Crores, the Performance Guarantee would be 5% of this amount, which is Rs. 20,00,000. The Security Deposit is 2.5% of the tendered value, amounting to Rs. 10,00,000 for an estimated cost of Rs. 4.00 Crores. Formulas for calculation based on tendered value (TV) are:
- Performance Guarantee = 0.05 * TV
- Security Deposit = 0.025 * TV The bid capacity required can be summarized as:
- Earnest Money Deposit (EMD): Rs. 8,00,000
- Performance Guarantee: 5% of the tendered value (for Rs. 4.00 Crores, it would be Rs. 20,00,000)
- Security Deposit: 2.5% of the tendered value (for Rs. 4.00 Crores, it would be Rs. 10,00,000) Therefore, the bid capacity required includes an EMD of Rs. 8,00,000 and a Performance Guarantee of 5% of the tendered value, with the Security Deposit being 2.5% of the tendered value. However, since the exact tendered value is not provided, the exact Performance Guarantee and Security Deposit cannot be calculated without assuming the tendered value equals the estimated cost of the work. Given this, the bid capacity can be represented by the provided values and formulas, but the exact amounts for Performance Guarantee and Security Deposit depend on the actual tendered value.
Technical Capacity
... View More
The required prior work experience for the bidder is a minimum of 10 years of relevant experience with a reputed construction company for diploma holders. However, for graduate engineers, the specific years of experience required are not mentioned. As for the value and percentage of similar works completed, no specific information is available.
Costs
EMD
₹ 8,00,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2025_NFC_845049_1Tender No
C/1383/2025Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
... More
Beyond 30 cm girth upto and including 60 cm girth
5
-
-
... More
Beyond 60 cm girth upto and including 120 cm girth
5
-
-
... More
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc. complete as specified and directed.
100
-
-
... More
Earthwork excavation upto required depths in all kinds of Soils except Soft and Hard Rock in both dry and wet conditions, dewatering if necessary, dressing the bottom and sides to required levels, profiles, slopes, etc., disposing the surplus earth/spoils within a lead of 50m , levelling the areas including clearing of all areas of all grass, rank vegetation, shrubs, bushes, trees upto 300mm girth measured 1.00 metre above ground level etc., complete all as directed and specified.
-
-
-
... More
a) Upto 1.50 m depth from average ground level.
250
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
125
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in ordinary rock upto the depths specified below including dressing of sides and ramming of bottoms, including getting out the excavated soil and disposal of surplus excavated soils as directed, within a distance of 50 m etc.,including clearing of all areas of all grass, rank vegetation, shrubs, bushes, trees upto 300mm girth measured 1.00 metre above ground level etc complete as directed by Engineer-incharge.
-
-
-
... More
a) Upto 1.50 m depth from average ground level.
75
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
75
-
-
... More
Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in hard rock (blasting prohibited) by chiseling, wedging or any other approved method viz. using plasma cutting with diesel plasma gun under 3.5Kg/Sqcm pressure, including air compressor, followed by pneumatic chieselling or using non explosive expansive chemical agents , including drilling of holes as specified by manufacture, filling of expansive chemical, followed by pneumatic chiseling upto the depths specified below, diamond wire rope cutting etc., including dewatering if necessary , dressing of sides and ramming of bottoms, getting out the excavated soil and disposal of surplus excavated soils, within a distance of 50 m etc.,clearing of all areas of all grass, rank vegetation, shrubs, bushes, trees upto 300mm girth measured 1.00 metre above ground level etc complete as directed by Engineer-incharge.
-
-
-
... More
a) Upto 1.50 m depth from average ground level.
50
-
-
... More
b) Above 1.50 m to 3.00 m depth from average ground level.
50
-
-
... More
Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead within NFC complete as specified and directed by EIC
375
-
-
... More
Lead charges for within NFC premises , additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for soils and rock or debris respectively
-
-
-
... More
a) for soil and fine materials
350
-
-
... More
b) for rock, RR masoary , debris etc
125
-
-
... More
STEEL WORKS
-
-
-
... More
Providing and fixing in position Anchor Fasteners or Wedge anchors of Fischer/ HILTI or approved make of best quality of 16mm dia and approved length for anchoring and supporting structural steel columns including drilling holes in RCC flooring, aligning bolts to position & proper level, fixing Bolts and tightening them properly as per manufacturer's specifications, including Washers Labour, etc., complete as per specifications and as directed by EIC.
100
-
-
... More
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position, surface preparation by cleaning with wire brush, painting with 2 (Two) coats of PU paint of male M/s Fosroc (Dekguard PU)/Pidilite/Asian Paints/Berger/Dulux over 2 (Two) coats of epoxy zinc rich primer of make Fosroc (Nitozinc primer)/Pidilite/Asian Paints/Berger/Dulux, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
-
-
-
... More
a) For Rolled steel sections
12000
-
-
... More
b) For plain plates/chequered plates.
2500
-
-
... More
Supplying, fabricating, erecting and fixing structural steel frame for ACP cladding on walls, trusses, purlins, bracings etc. at all heights using M.S. square/rectangular tube conforming to IS 1161/4923 of make Vizag Steel, Tata, SAIL, Jindal or any other approved equivalent in the required pattern as per drawing, including cost of cutting, bending, welding using weld rods of make D&H, Advani, Philips or its approved equivalent etc., erecting using derricks/pulleys/cranes, scaffolding or any suitable means, fixing in position The frame work shall be fixed to the wall with the help of M.S. brackets/ lugs of angle iron/flats etc. which shall be welded to the frame and embedded in brick wall with cement concrete block 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20 mm nominal size) of size 300x230x300 mm, including cost of necessary centring and shuttering and with approved expansion hold fasteners on CC/RCC surface, including drilling necessary holes. Approved cramps/ pins etc. shall be welded to the frame work to support cladding, the steel work shall be painted with 2 (Two) coats of PU paint of male M/s Fosroc (Dekguard PU)/Pidilite/Asian Paints/Berger/Dulux over 2 (Two) coats of epoxy zinc rich primer of make Fosroc (Nitozinc primer)/Pidilite/Asian Paints/Berger/Dulux. The frame work shall be fixed in true horizontal & vertical lines/planes. (Only structural steel frame work shall be measured for the purpose of payment, stainless steel cramps shall not be paid separately and nothing extra shall be paid).
4200
-
-
... More
Transportation, Shifting, erecting and fixing side hung MS tubular gates single/double leaves which is supplied by the Department having area up to 5 Sq.m. comprising 38mm nb medium quality steel tube frame with 65x10mm thick MS flat for horizontal, vertical and diagonal stiffeners, including providing necessary heavy duty ball bearing side hung hinges, lugs, latches, locking arrangements, pipe inserts and other fittings and fixtures necessary for smooth operation of gates, painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint (Asian paint, Berger, Johnson and Nickelson, Pedilitie, Nerolac) of approved shade for all exposed surfaces as directed by Engineer In charge. NOTE : Gates will be supplied by the Department.
1000
-
-
... More
R.C.C WORKS
-
-
-
... More
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Ambuja, Birla make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
60
-
-
... More
Supply, fabrication and erection of Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag, Sail, JSW make for Reinforced cement concrete items at all depths and heights below and above plinth level, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
3000
-
-
... More
Reinforced Cement Concrete by insitu mixing by WEIGH BATCHING or from approved RMC Plant of Grade M - 30 (Minimum Cement Content – 350 Kg/Cum) using Portland Pozzolana Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with graded stone aggregate of 20mm maximum size and sand at and at all depths and heights including mixing with superplasticizer of make M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturer’s Specifications, conveying / pumping / placing at all depths / heights below / above plinth level, compaction, finishing as specified, curing, etc., including providing and placing cover blocks of required sizes in cement mortar 1:1, etc., but excluding Formwork and Steel Reinforcement complete as specified and directed. NOTE:-The concrete of RCC of any grade if it is insitu (site mix) the sand to be used shall be River sand. In case of RMC, the manufactured sand can be used.
-
-
-
... More
a) Below FFL
300
-
-
... More
b) Above FFL
150
-
-
... More
SHUTTERING
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level, vertical, horizontal, inclined for insitu reinforced cement concrete and in plain cement concrete work as required to correct line and level as per drawings with necessary bracings in all axes to give a stable assembly, with provision for making the joints in the shuttering fully leak proof, and with provision for fixing coil nuts with tie rods along with suitable channel for lateral supports and for inserts, projecting dowels, anchor bolts or any other fixture, including staging, access and working platforms etc., all complete as specified and directed, applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete, including dismantling and removing the aforesaid assembly after the concrete attains the sufficient strength to self-support itself without cracking and distortion all as per specification, including all materials and labour complete in all respects at all lifts. (The measurement for the formwork will be the actual area of forms in contact with concrete surfaces.)
-
-
-
... More
Below and Upto Finish Floor Level
100
-
-
... More
Above Finish Floor Level
400
-
-
... More
MASONRY WORKS
-
-
-
... More
Half brick masonry using fly ash cement bricks of 7.5 grade non-modular bricks conforming to IS12894 in partition walls in cement mortar 1:4 using crushed sand of grade conforming to BIS 2116 at all depths and heights below and above plinth level including scaffolding, raking out joints, curing, etc., complete including providing stiffeners of reinforced cement concrete 1:2:4, 115 mm x 75 mm size at every 900 mm height and 2 No.s 8 Dia TMT bars, necessary formwork, curing, etc., but excluding reinforcement, complete as per specifications and as directed by EIC. NOTE : Payment for TMT bars will be made in relevant item
100
-
-
... More
Brick work using quality flyash cement bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 using crushed sand of grade conforming to BIS 2116 at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
120
-
-
... More
PLASTERING & PAINTING WORKS
-
-
-
... More
Cement plastering 15 mm thick for internal walls in cement morar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 River Sand (conforming to IS 1542)} fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC , preparation of surface by hacking, steel/tubular scaffolding curing etc., complete as specified and directed..
850
-
-
... More
Cement plastering 20 mm thick in 2 coats over masonary and concrete surfaces with base coat of 12 mm thickness in cement mortar 1:4 and finishing coat of 8mm thickness in cement mortar 1:3 (smooth finish), with approved integrated water proofing compound in both coats @ 2% by weight of cement, of M/s. Fosroc/Demach/ Huntsman/ Pidilite/ SIKA Qualcrete / MBT or as per manufacturer’s specifications at all heights, including hacking of concrete surfaces, final rendering with sponge to correct line, level and plumb, curing including making grooves, drip moulds, scaffolding wherever necessary, complete as per specifications and as directed by EIC
1000
-
-
... More
Providing and applying cement based wall putty of 1mm thick in two coats of M/s. Birla White or approved equivalent, at all floors and locations, on plastered surfaces finished smooth to correct line, level, plane, plumb etc., including one coat of primer, preparing the surfaces, scaffolding, smoothening the putty surfaces with very fine water proof emery paper to get a glossy finish etc. complete as per specifications, as per manufacturers specifications, drawing & as directed by the Engineer-in-charge.
850
-
-
... More
INTERNAL PAINTING :- Applying 2 or more coats of interior premium emulsion paint of Asain Apcolite suprema /Dulux interior acrylic premium emulsion of required shade of interior grade, having VOC content less than 50 grams/liters including one coat of approved suitable interior primer at all heights above plinth level inside rooms etc., complete and as complete and as directed.
2200
-
-
... More
EXTERIOR PAINTING :- Applying of Two or more coat of elastomeric liquid applied water proofing membrane of asain paint damp proof advance or Dulux Aquatech Flexible damp proof base coat or on surface of vertical wall shall be applied as per manufacture specification.
Finishing walls with 2 or more coat of 100% Premium acrylic Smooth waterproof exterior finish emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS:15489:2004, alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Dept Tinted) with silicon additives, equal to asain paint ultmia protek or Dulux Professional weathershield Flexx or Paints can be obtained from approved make from M/s. Asian, Dulux, Berger, Johnson & Nicklson, Nerolac, Pidilite or any other make etc., complete and as directed.
1100
-
-
... More
Removing two or more layers of old paint by scrapping with putty blade or with twisted steel wire brush fitted to angle grinder, sanding with 80 grit sand paper using mechanical sander till the mother plastering surface is exposed and preparing the surface smooth including necessary repairs to scratches etc. complete.
1000
-
-
... More
Providing and fixing double scaffolding system (cup lock type) on the exterior/ interior, up to seven story height made with 40mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it thereafter. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. NOTE: (i) The scaffolding will be paid for height works beyond 10.0m. (ii) For mobile scaffolding, only the elevational area of scaffolding erected and dismantled will be measured for payment. (iii) All activities in each location including dismantling windows, fixing new window, plastering, painting etc would be covered in a single measurement irrespective of the duration of scaffolding.
1200
-
-
... More
CABINS, FALSE CEILING & WINDOWS
-
-
-
... More
Providing and fixing in position epoxy powder coated (minimum thickness of power coating 50 microns)Aluminium partition/door/windows/ventilators/louvers with single/double side hung/tophung/sliding shutters etc. using extruded built up standard tubular and other sections of approved make (Jindal Delux Series (Domal)/Hindalco/Indal sections or its approved equivalent sections) and confirming to IS 733 and IS 1285 of required available colour, manufactured to relevant IS Standard Specifications including applying Epoxy coating of required thickness, fixing with rawl plugs and screws or fixing with clips or with expansion hold fastners, including fittinngs and fixtures of make Classic/Jyothi/Godrej or approved equivalent such as locking arrangement for windows, powder coated aluminium handles, powder coated aluminium aldrops, powder coated aluminium tower bolts of size 200mmX10mm, powder coated aluminium door stopper (twin rubber stopper) with rubber cushions to doors, magnetic catcher, hinges, friction hinges, aluminium push plates, sliding rollers, aluminium hardware fixtures, cleat angles, beadings etc as per the requirement, gaps of structural opening to aluminium frame work to be filled with siliconate / polysulphide sealant, fixed suitably to brick wall RCC column structures complete as directed.
NOTE: Aluminium sections such as shutter frames, window / door frame, beading channel for glass/adjustable louvers/mosquito mesh, door handles, louvers etc., shall only be measured linearly as per actual / finished cutting size and multiplied with sectional weight of the individual section and the total quantity of aluminium section will be arrived at for payment without any allowance for wastage. No separate payment shall be made for fittings such as locking arrangement for windows, hinges, friction hinges, rollers, door stoppers, magnetic catchers, fittings and fixtures, gasket, cleat angles etc.
6000
-
-
... More
Providing and fixing 4 mm thick plain float glass of make M/s Atul/ Modiguard/ Triveni/ Hindustan Pilkington or approved equivalent including PVC/EPDM lining as per the drawing and as directed for window shutters and ventilators.
200
-
-
... More
Providing and fixing fly/mosquito proof stainless steel grade 304, mesh wire gauge with average width of aperature 1.4 mm in both directions with wire of dia. 0.50 mm including fixing with Aluminium door/window shutters or ventilators, including necessary fastners, aluminium flats etc, all complete as directed by Engineer-in-Charge.
200
-
-
... More
Providing and fixing glazing with 5 mm thick plain float glass of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing including frost film of approved pattern & approved quality as directed for window shutters, door shutters, partitions etc.,
250
-
-
... More
Providing and fixing to aluminium partitions Pre-laminated cement particle board of thickness 12 mm of M/s Bison, Visaka or approved equivalent conforming to IS:15786 with decorative lamination on both sides
250
-
-
... More
Providing and fixing bright finished 150 mm mortice lock with 6 levers without pair of handles of M/s ‘EVERITE’/Godrej or approved equivalent for aluminium door, with necessary screws etc complete as per direction of Engineer- in-charge
10
-
-
... More
Providing and fixing aluminium die cast body universal hydraulic door closer of M/s EVERITE/Godrej or approved equivalent conforming to IS : 3564, suitable for door weight upto 80 kg and door width upto 1000 mm with speed adjustment including necessary accessories and screws etc. complete as directed by EIC
12
-
-
... More
Providing and fixing double action hydraulic floor spring of M/s EVERITE/Godrej or approved equivalent conforming to IS : 6315, having brand logo embossed on the body / plate with double spring mechanism and door weight upto 125 kg, for doors, including cost of cutting floors, embedding in floors as required and making good the same matching to the existing floor finishing and cover plates with brass pivot and single piece M.S. sheet outer box with slide plate etc. complete as per the direction of Engineer-in-charge. With stainless steel cover plate minimum 1.25 mm thickness
12
-
-
... More
Providing and Fixing Light weight Calcium Silicate False Ceiling with Silhouette Grid at all heights of Aerolite make with 15mm thick integral densified micro edge light weight calcium silicate tiles of size 595X595mm of approved design, texture and pattern having 100% RH – HUMIDITY RESISTANCE, non-combustible as per BS 476, Noise Reduction Coefficient of 0.5, Light reflectance above 85%, Thermal Conductivity less than 0.05 W/m K, to be laid in true horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized steel sections of 0.4mm thick Silhouette Profile, rotary stitched double webbed white with 6mm reveal profile comprising of main ‘T’ runners of size 15X42mm of length 3000mm, cross-T of size 15X42mm of length 1200mm and secondary intermediate cross-T of size 15X42mm of length 600mm to form grid module of size 600X600 mm , wall angle of size 22x19x0.4mm to be fixed all around the wall. Main ‘T’ runners to be suspended from the ceiling using GI slotted cleats fixed to ceiling with 50mm long 8 mm outer dia M-6 dash/anchor fasteners, 6mm dia fully threaded GI hanger rod with L-shape level adjuster of size 85X25x2mm or 4mm GI hanger rod with butterfly clip, including scaffolding, at all heights, complete as per specifications and as directed by Engineer-In-charge. Note:Hanger syster shall be decided as per site conditions and height of false ceiling as directed by Engineer-in-charge.
1200
-
-
... More
Supplying, installing LED light fitting in false ceiling, high efficient 2ft X 2ft, generation-V or better, surface cum recess mounted light fitting with CRCA housing, with output 3600 Lumens, Luminaire efficacy of around 120 lm/W, IP20, surge protection of minimum 4KV, driver efficiency 80%, power factor0.95, THD10%, CRI80, CCT-5700K, voltage range 120-270V AC, Ripple5%, Electrical insulation class-1, EMI/EMC compliance. Makes: Philips/Wipro/Bajaj
200
-
-
... More
Providing 4mm thick Heavy Duty POLYURETHANE SELF SMOOTHING CONCRETE FLOORING Matt Finish from M/s Pidilite/ FOSROC/ UCRETE MF (BASF) or equivalent make consisting of 1mm thick Scratch coat of Duracrete MD/ Nitofloor SL/UT 4000/ UCRETE MF on well prepared concrete surface and 3mm thick Self smoothing topping of Duracrete MD/ Nitofloor SL/UT 4000/ UCRETE MF along with Surface Preparation including cleaning, preparing the existing floor by removing adhesives, oil, grease, loose particles, laitance, dust etc., by grinding, scarifying, brushing, dusting etc., with necessary tools & tackles to receive PU flooring as specified by Manufacterer and EIC., Treatment of Construction/ Contraction Joints in floor by cutting, cleaning and filling with Epoxy Mortar with necessary tools and tackles, rectification of any pot holes present with suitable and similar filling material. The surface should be prepared with anchor grooves 8mm x 8mm along the perimeter of the floor and around drains, machine legs, columns etc. including disposal of debris in the specified area as directed by Engineer-in-Charge and as per manufacturer's instructions. NOTE : Contractor shall engage authorised applicator of M/s Pidilite/ FOSROC/ BASF and shall execute TRIPARTY AGREEMENT in appropriate bond paper to guarantee defect free flooring for its service life as per specification. During the guarantee period the contractor shall attend all defects etc. if noticed, free of cost, starting the work of checking up and rectification within a week's time from the date of intimation about such defects
Specification: for PU Flooring material:
Compressive Strength: 53 N/mm2 (BS6319:Part 2)
Flexural strength (ISO 178) : 21N/ mm2
Dynamic E-Modulus : 14000 N/ mm2 (ASTM C597-83)
Tensile Strength (ISO:R527) : 9 N/ mm2
Concrete Adhesion : concrete Fails (BS6319:Part2); Abrasion Resistance ASTM D 4060-2019 (Taber CS17) : 43 mg Max loss Coefficient of Thermal Expansion : 3.6x10-6 0C-1 ASTM C531);Thermal Conductivity (BS874) : 0.9W/mo C; Skid Resistance (Pendulum Test BS 8204) : 45-50 PTV;
Surface Resistivity (BS2050) : 2x1011ohms;Density (BS6319:Part) : 1970 Kg/m3
Water Adsorption (CP.BM 2/67/2): 0 ml;Surface Spread of Flame : Class 2 (BS476:Part7).
2000
-
-
... More
Supply and application of PU based coving mortar at junctions of wall and floor or at all right angles with dimensions 75mm x 75mm including making grooves in wall and floor, one coat of primer and finishing with Nitocote FC or equivalent in two coats with necessary tools and tackles.
350
-
-
... More
Levelling the uneven floor surface to get uniform levels using epoxy screed with average thickness of 10mm made of Cipoxy 17 of M/s Pidilite or approved equivalent and formulated aggregares (silica sand) in recommended proportion over primer Cipoxy 17 on the floor surface after mixing resin and Hardner in 1:1 ratio by volume including surface preparation by suitable means till surface free of grease, laitance and other foreign particles is achieved, and application of sealer coat with similar material, all as per manufacterer's specifications and as directed by Engineer-in-charge
75
-
-
... More
Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF/Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods, masking tape etc. of make Eurobond/ Deltyn Sheet Fixing with Paper Joint As per Design including providing & fixing aluminium rectangular hollow tube framework of size 50mm X 25mm of make Hindalco/Jindal or approved equivalent complete as directed by Engineer-in-charge.
350
-
-
... More
Veneer panelling/Door frame with 12mm ply with wooden framework -Providing and fixing in properline and level,12mm thick Water proof plywood of approved make BWP conforming to IS 710, 100% Gurjan/Century/Artees/Login with vineer finish of 4mm thick of Natural vineer/ flaming / Royal club/ greenlam conforming to sample shade approved with approved shade of polish & finished in approved melamine , fixing panel to existing wall by means of approved wooden screws/ nails with inside Sound Proof Acostical material panel glass wool of 25mm thick and wooden framework of size 600mm X 600mm , made out of 18/12mm thick commercial ply of BWP grade conforming to BIS 710 of 100% Gurjan/Century/Artees/Login make cutting the ply and fixing with nails/ metallic wooden screws in line , plumb and level The edges should have matching wood beading finished in approved melamine including applying one coat of fire retardant paint complete as specified and directed.
Note :- Making rebate for door frames shall be done in the panneling and no extra payment will be made for the same.
75
-
-
... More
Supplying & fixing in position 35mm thick single/double leave solid core block board flush door shutters of appropriate size conforming to IS 2202 (latest) of M/s Kalpataru, Anand, Kutty or approved equivalent with external type second class teak wood lipping alround of size 38x20mm, including fixing approved high pressure synthetic resin bonded decorative laminates of 1mm thick (Matt Finish) conforming to IS 2046 on both sides of M/s Greenlam, Centuryply, Sonova or approved equivalent, fixing shutters in position to pressed steel door frames/wooden frames/granite frame works (door frames shall be paid separately under relevant item) at all floors by cutting / planing if necessary including labour for fixing of the fittings & fixtures as per drawing with wooden packing pieces if necessary (but excluding the cost of fittings and fixtures with screws which shall be paid separately under relevant item) including painting the edges of shutters with two coats of wooden varnish if required of approved make & colour over one coat of approved primer etc. all complete as per specifications,drawings & as directed by Engineer in charge. NOTE : Decorative synthetic laminate shall be got approved by EIC before manufacturing the door.
50
-
-
... More
Providing & fixing stainless steel of grade SS304 square tower bolts for wooden doors of min size 200 X10mm size of make Kich (TBS38S) or approved equivalent with necessary screws complete as specified and directed .
25
-
-
... More
Providing & fixing set of stainless steel of grade SS316 mortice door Handles for wooden doors of dia 22 mm, including set of escutcheons of make Kich (MH223FS), necessary screws etc, complete as specified and directed .
25
-
-
... More
Providing and fixing Heavy quality Stainless Steel of grade SS316 butt hinges for wooden doors with 4 nos. of bearings of size 125mmX75X3mm of make kich(DH235S) or approved equivalent with necessary screws etc complete as directed.
25
-
-
... More
Providing and fixing 7 inches mortise door lock without mortice handles for wooden doors with main plate and strike plate of make Kich(MLB72S) or approved equivalent, including necessary scres etc., complete as specified and directed.
25
-
-
... More
Providing and fixing stainless steel (SS304) hanging floor Door stopper for wooden doors with double door buffer of make Kich (PRDB32DS) or approved equivalent, necessary screws etc. complete as specified and directed.
25
-
-
... More
Providing and fixing stainless steel over head door closer of Kich (DC512SS) make or approved equivalent for wooden doors weighing upto 90kg with necessary accessories, fixtures, fittings, scews etc, complete as specified and directed.
25
-
-
... More
Extra for Providing Vision panel of size 450x200mm/ 400x200mm/any other size as per drawing including fixing 5 mm thick modi guard clear glass with necessary beadings/ lipping as per manufacturers' specifications complete all as per specifications and as per drawings and as per direction of EIC.
10
-
-
... More
ELECTRICAL WORKS
-
-
-
... More
Supply and installation of 1.8 mm thick FRLS 25mm dia PVC conduits conforming to IS with required bends/junctions of M/s Sudhakar/AKG industries make in the wall by clamping on the wall with required hardware
500
-
-
... More
Supply and pulling of following sizes of flexible FRZH copper wires to be drawn in already concealed PVC conduit/channels with ferruling on both ends excluding cost of pipes, channels and switch boards.
Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, ANCHOR, UNIVERSAL CABLES LIMITED, FINOLEX
-
-
-
... More
1.5 Sq.mm FRZH Copper wire from switchboard to light fitting /fan
1200
-
-
... More
2.5 Sq.mm FRZH Copper wire for incoming circuit to switchboard
2500
-
-
... More
4 Sq.mm FRZH Copper wire for AC and geyser wiring
1200
-
-
... More
Supply and installation of vertical model double door TPN/SPN Distribution boards with minimum IP 43 of following sizes
Note: RCBO& MCBs shall be C rated and indicative type
Make: LEGRAND, HAGER, SCHNEIDER, SIEMENS
-
-
-
... More
8 way vertical TPN MCB DB with following components.
a. 63A , 100mA FP RCBO - 1 No Incomer
b. 10 A SP MCB - 12 Nos
c. 25A SP MCB -12 Nos
-
-
-
... More
Supply
2
-
-
... More
Installation
2
-
-
... More
12 Way Horizontal SPN MCB DB with following components.
a. 32 A DP 30mA RCBO incomer - 1 No
b. 10A SP MCB - 2Nos
c. 16A SP MCB -4 No
d. 25A SP MCB - 2 No
-
-
-
... More
Supply
10
-
-
... More
Installation
10
-
-
... More
Supply and fixing of 230V,~1400rpm, 100m3/min air delivery, 18" pedestal fan of Bajaj /Almonard /Usha /Khaitan make to be fixed with all required accessories and hardware.
20
-
-
... More
Supply and installation of modular switch boards along with PVC back box, required face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered universal sockets. Colour of the switches and sockets/frame shall be Grey colour.
Makes: CRABTREE MURANO, NORTHWEST ARTISA, LEGRAND ARTEOR, SCHNEIDER ELECTRIC ZENCELO
-
-
-
... More
12 modular switchboard with 4 No 6A socket and 4 Nos of 6A switches
-
-
-
... More
Supply
35
-
-
... More
Installation
35
-
-
... More
8 modular switchboard with 8 Nos of 6A switches
-
-
-
... More
Supply
15
-
-
... More
Installation
15
-
-
... More
6 modular switchboard with 2 No 6A socket controlled by 2 No 6A switch
-
-
-
... More
Supply
15
-
-
... More
Installation
15
-
-
... More
3 modular switch board with 16A switch and socket
-
-
-
... More
Supply
20
-
-
... More
Installation
20
-
-
... More
Supply and installation of L&T/ Legrand/MDS make 20 A 2pole & Earth Metal clad power socket with 25 A SP MCB control including plug top
-
-
-
... More
Supply
15
-
-
... More
Installation
15
-
-
... More
Supply and laying of following sizes of 1.1 KV grade XLPE insulated, PVC extruded inner sheathed, armoured, FRLSH PVC ST2 outersheathed cable on cable trays/trenches with all accessories
Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED
-
-
-
... More
4c 25 Sq.mm Al cable
-
-
-
... More
Supply
500
-
-
... More
Installation
500
-
-
... More
4c 6 Sq.mm Cu cable
-
-
-
... More
Supply
1000
-
-
... More
Installation
1000
-
-
... More
Providing end terminations for following sizes of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty glands, heavy duty long neck copper lugs etc complete
Makes: DOWELLS, JAINSON, HMI, COMET
-
-
-
... More
4c 25 Sq.mm Al cable
6
-
-
... More
4c 6 Sq.mm Cu cable
20
-
-
... More
Supply and installation of 100 mm width, 50mm height of 2mm thickness hot dip GI perforated cable trays along with 1mm thick hot dip GI tray cover
-
-
-
... More
Supply
200
-
-
... More
Installation
200
-
-
... More
Supply and fixing of 25x3 mm hot dip galvanised GI strip for earthing by clamping on walls/trays/trench with all required accesories
-
-
-
... More
Supply
1000
-
-
... More
Installation
1000
-
-
... More
Supply and installation of 32 x 20 mm DLP plastic trunking system of Legrand/ Honeywell/ Schneider make with required clamps for fixing, cover, end caps etc complete including required accessories like angles and junctions
-
-
-
... More
Supply
300
-
-
... More
Installation
300
-
-
... More
MISCALLANEOUS WORKS
-
-
-
... More
Providing and fixing G.I. chain link fabric fencing, made of G.I. wire of dia 4 mm, PVC coated to acheive outer dia not less than 5mm of required color, shade, width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
100
-
-
... More
Providing and laying 40mm thick Indian patent stone flooring and skirting with cement concrete 1:2:4, using 10mm and below size hard broken aggregate including providing and application of non – metallic floor hardener of M/s. Fosroc, Sika, STP, Pidilite, Armstrong or approved equivalent at spread rate of 7Kg/Sqm or as specified by manufacturer for heavy duty floor, compaction, finishing smooth by trowel to required levels or slope as specified, curing, rubbing the surface smooth, cleaning the surface neatly at the time of handing over the area complete all as per specifications and as directed by the Engineer
50
-
-
... More
Providing and fixing roller blinds of approved make as per the manufacturer's specifications with drive unit, end plug, support brackets, roller tube, bottom rail, ball chains. Drive unit to be of moulded plastic with straight rectangular support pin and inserted into the tube end. It shall be driven by a ball chain pulley and can be positioned at right or left side of the shade. The shade when lowering or raising shall automatically be lockable upon release of the ball chain by the means of friction lock. End plug shall be moulded by plastic locking pin. The plug shall be inserted into the tube end. Support brackets shall be of zinc plated steel and provided with moulded plastic cover and used in right and left hand position differentiated by the acceptance of the rectamgular drive unit support or the round idler plugin Roller tube shall be made out of roll formed steel with outer diameter 25mm. It should be suitably protected against corrosion, keyway integral with the tube to accomodate the spline.
170
-
-
... More
Micro Concrete: Providing and applying of Micro Concrete of M/s Pidilite/ Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make, including mixing with water and properly graded 5mm to 12 mm aggregates up to maximum 50% by the weight of dry micro concrete (ONLY for repair sections generally deeper than 100mm), placing, compaction, finishing and curing all as per manufacterer's specifications and as directed by EIC. NOTE : Only weight of micro concrete will be considered for payment. Aggregate will not be considered.
5000
-
-
... More
Concrete repair: All the potholes, surface undulations, weared concrete surfaces: Repair the concrete by bringing in the surface profile into a regular geometrical shape, remove the top layer of concrete contaminations either by using chipping bits or grinding machines, cutting tools, surface profiling machines like cup brush machine, abrasive grinders. If heavy oil contamination is observed use degreasers on the surface to remove oil contaminations, clean the surface till a fair concrete surface is obtained. The surface profile of concrete should be SP-2 (ICRI technical guideline No: 03732).
Surface preparation: Clean the concrete free of dust and laitance and keep the surface free of loosely bonded particles. Perform CSD test on concrete before application of primer.
Priming: Apply PU based Aromatic primer Duraprime 100 or equivalent on the surface after surface preparation. Ensure to spread the primer evenly on surface with hard stiff brush. Pot holes repair: Within 30 mins of application of primer, mix all 3 components of elastomeric epoxy Concrete - Floorkrete EC or equivalent with slow speed mechanical helical strrier. Floorkrete EC is a flexible epoxy concrete that has A. Elongation of 23% - 26%, B. compressive strength upto 40 MPa, C. Tensile upto 14 MPa, D. flexural upto 20 MPa. E. Its Shore D hardness is 50 + 2, Pour the prepared Floorkrete EC or equivalent on the primed surface till the surface is filled with material. Leave the surface for 24 hours before permitting traffic on repaired area. Fork lifts may be run after 72 hours of application or elastomeric epoxy concrete.
500
-
-
... More
Supplying non-shrink, free flow, high strength cementitious grout of M/s FOSROC (Conbextra GP3/GP2), Pidilite, BASF or approved equivalent, mixing with water and 10mm down size graded aggregates (aggregates to be mixed ONLY for grouting the gaps of thickness more than 100mm) in the proportion as per manufacturer's specifications and placing in column base plates, pockets of foundations etc., in pourable or flowable consistency, including shuttering, curing as per manufacturer's specifications. NOTE : Only weight of cementitious grout is considered for payment. Weight of aggregate and water will not be considered for payment
1600
-
-
... More
Providing and fixing plaster mesh/chicken mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm size 25mm x 25mm with a zinc coating of 120gms per sqm along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications.
100
-
-
... More
Providing & laying structured wall 160mm DN UPVC under ground drainage pipes & fittings (SN-8-SDR-34) of Ashirvad/Supreme make for sewer lines conforming to IS:16098 (Part-1) to proper level & grade, jointing including providing coupler with cement solvent / welded joints / as per manufacturer's requirement, UPVC fittings such as Bendes, Tees & Y, Reducers, Blanking Plugs, Couplers, Adaptors etc, connecting with existing manholes, including making holes in manholes and grouting with GP2 grout after fixing of pipe, complete as specified and directed
50
-
-
... More
Providing and fixing 110 mm n.b. un-plasticised PVC rain water pipes (single socketed pipes) with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’ with injection moulded fittings, jointing with approved synthetic adhesive or seal rings conforming to IS: 5382 to make junctions leakproof, embedding the pipe into the slab/ gutter, fixing it to wall with proper fittings, testing complete in line, level and plumb all as directed.
350
-
-
... More
Providing and Fixing Trapezoidal profiled Galvalume Sheets of required shade of make M/s. JSW/TATA Bluescope (Colorbond) conforming to ASTM A792M/ IS 15961 for roofings and claddings using sheets in 0.5mm TCT (Total Coated Thickness) with minimum galvalume thickness of AZ200 gsm and yield strength not less than 550MPa including flashings, corners, ridges, eaves boards, gutter, rainwater downcomer, edge trim, etc., of approved make including fixing the sheets with Stainless Steel self tapping, self drilling and self fastening screws, and EPDM Washers, etc., all complete as directed. a) Roofing with colour coated Galvalume sheets & Rain water pipes, etc.
50
-
-
... More
Supplying and fixing Fibre Reinforced Cement Corrugated sheets, 6mm thick of Charminar/ Visakha/ everest make conforming to IS 459 and laying as per IS 3007 at various elevations using necessary safety nets, roof walk ladders and other standard safety devices including all overlaps, mitring, Supplying and fixing necessary 8mm dia self tapping self drilling self fastening powder coated screws of suitable length not less than 65mm, with EPDM washers as per manufactures code of Practice and cutting the sheets as required etc., complete all as directed by Engineer-in-Charge.
200
-
-
... More
Providing and fixing at all heights cement bonded wooden particle board of thickness 16 mm of M/s Bison, Visaka or approved equivalent conforming to IS:14276 with approved 8mm dia self tapping self drilling self fastening powder coated screws of suitable length not less than 65mm to MS frame
50
-
-
... More
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone for floor, treads/ risers /steps / ramps /wall dadooing of required size, approved shade, colour and texture laid over cement mortar, joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
-
-
-
... More
Flooring/ staircase treads above 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand) including nosing and 3 anti skid grooves
25
-
-
... More
Wall dadooing/ Skirting/ staircase riser above 12 mm thick, 1:3 cement mortar
75
-
-
... More
Cutting the existing RCC slab/Floor/Road including the existing floor finish if present using diamond floor saw/cutter neatly to the required length, shape, size up to a depth of 200 mm without damaging/distrubing the adjoining areas complete all as directed by EIC.
100
-
-
... More
Cutting using diamond saw or any other suitable equipment grooves of size 6mm X 12mm in flooring at construction joints or as directed by Engineer incharge, including filling with polysulphide sealant of make fosroc/pidilite or approved equivalent using grout gun, cleaning the joints using compressed air, drying the joint before application complete as directed.
100
-
-
... More
Supplying and fixing in position approved motor automatic operated (push & pull) steel rolling shutters made from M.S. lathes of not less than 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft not less than 6", ceiling strips providing approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing not less than 1.0HP motor of Crompton Greaves, L&T or any approved equivalent along with other accessories for On and Off, level switch connected operatable, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
40
-
-
... More
Making core cutting in RCC structural elements using diamond core cutter to remove core upto 200mm dia and 300mm depth including labour, equipment all as directed by EIC
20
-
-
... More
Servicing/ Repairing/ Replacing the Hydraulic door closers/Mortise Locks/ Door shutter hinges for wooden doors/Aluminium doors, or other carpentary works in various plants & buildings at various elevations with all required tools, skilled manpower, drawing the required new door closers/mortise locks/hinges from CMS stores if required, depositing the damaged door closer/ locks/hinges at CMS stores complete as specified and directed.
Note :-Min One Skilled Carpenter & One Semiskilled Assistant are required to be deployed for the entire contract period
864
-
-
... More
Servicing/Repairing/Replacing the existing bib taps/Stop cocks/Flush Tanks/ Gate valves/ Float Valves etc. in toilets/bathrooms or other plumbing works in various plants and buildings with all required tools, skilled manpower, drawing the required material from CMS stores if required and depositing the damaged fixtures at CMS stores complete as specified and directed.
Note :- Min One Skilled Plumber & One Semiskilled Assistant are required to be deployed for the entire contract period
864
-
-
... More
DISMANTLING WORKS
-
-
-
... More
Dismantling/breaking the existing plain cement concrete surfaces carefully in flooring, ramp etc. to the required size, using pneumatic cutters or any approved means including disposing of debris within a distance of 50 m etc., complete as specified and directed.
15
-
-
... More
Dismantling very carefully the existing reinforced cement concrete at all depths and heights below and above plinth level using pneumatic cutters or any approved means including cutting the reinforcement and transporting bars to departmental stores disposing the debris within the lead of 50 m complete as specified and directed
30
-
-
... More
Removing carefully the existing PVC flooring including cleaning the adhesive from the floors and disposing the debris and stacking at places within NFC premises for all leads as directed by the Engineer-in-charge
1800
-
-
... More
Removing the damaged rainwater downtake pipes of all diameters from all heights, including clamps and stacking the pipes within NFC for all leads, complete as directed.
350
-
-
... More
Removing carefully existing chainlink fabric from angle iron posts and struts by removing hook bolts, nuts, etc, straightening GI rods (vertical as well as horizontals) etc., rolling back the removed chainlink, collecting hooks, bolts and nuts, stacking including cutting of iron angle posts, dismantling of PCC pedestals, transporting the materials to Departmental stores etc., complete as directed by Engineer-in-charge. Note: Area of the chain link fabric will be measured for payment.
150
-
-
... More
DISMANTLING OLD PLASTER, raking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within NFC premises for all leads etc., complete as specified and directed.
1000
-
-
... More
Dismantling the existing Brick masonry very carefully in cement motor with plastering on both sides very carefully at depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacking of useful materials and disposing the unserviceable debris within the lead of 50m, etc., complete as specified and directed.
60
-
-
... More
Dismantling aluminium/ Gypsum partitions, fixed glazing and false ceiling of all types including carefully removing of false roofing sheets, supporting frame, suspenders, existing light fittings, cables, cleats, glass panels, particle boards, fixtures, etc, disposal of unserviceable material and stacking of serviceable material with in NFC premises for all leads as directed by Engineer-in-charge
700
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements
Past BiddersThis list is curated from the bidders of the similar tenders in the past
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%
- Bidder NameThis Information is for unsubscribed user This Information is for unsubscribed user
- Awarded Ratexx%