Nuclear Fuel Complex Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date13 Mar 2024
Closing Date15 Apr 2024
Tender Amount₹ 1,95,00,000
Costs
EMD
₹ 3,90,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NFC_800123_1Bid Award Id
ViewTender No
C/1339/2024Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Filling available excavated earth ( excluding rock ) within NFC Premises in trenches, plinth, sides of foundation etc., in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering, lead up to 2 km and lift upto 1.5 m. etc. complete as specified and directed.
125
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc. complete as specified and directed.
150
-
-
Lead charges, including loading, unloading, stacking, the disposable Earth by Mechanical transport for lead up to 2 KM. Note:-Lead charges measured and paid based on Truck measurement with deduction of voids @ 25%.
150
-
-
Lead Charges, including loading, unloading stacking, the disposable ROCK / debris, by mechanical trasport for lead UP to 2 KM. Note:-Lead charges measured and paid based on Truck measurement with deduction of voids @ 50%.
50
-
-
CONCRETE WORKS
-
-
-
Plain Cement Concrete with Nominal Mix 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with river/ manufactured/robo sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., complete as specified and directed, but excluding Formwork.
20
-
-
Reinforced Cement Concrete design mix of Grade M25 by insitu mixing using Weigh Batcher or RMC of Ultra Tech, Birla Ready Mix up to specified level below and above plinth using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with river/manufactured/robo sand and graded stone aggregates of 20mm maximum size including mixing superplasticizer of brand M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per Manufacturer's Specifications, Pumping / Lifting of concrete to the required heights, Concrete laid to proper level, profile and slope, placing concrete, consolidation, finishing, curing, etc., complete as specified and directed, but excluding Formwork. in foundation, footings, plinth beam, beam, slab chajjas, lintels, bed bloks staircases, walls etc.,
90
-
-
Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush and cutting 25mm on top and filling the required material, cutting in panels including supply and laying of HDPE/LDPE sheet of 200 micron etc. complete as per specifications and directions of Engineer-in-charge.
80
-
-
STEEL WORKS
-
-
-
Supply, fabrication, erection and fixing in position Reinforcement bars for Reinforced Cement Concrete items at and at all depths and heights below and above plinth level with High Yield Strength Deformed (HYSD) bars/TMT Bars 500D conforming to IS 1786 (Latest Edition) from approved source of make of M/s. Tata, Vizag Steel, SAIL, Jindal including transporting to site, loading and unloading, decoiling, straightening, cutting, bending, making fan hooks of required shape, dowels for bonding masonry, removing of scales, fixing bars with chairs, space bars wherever required, fixing and tying in position with Two (2) strings of 18 Gauge soft drawn annealed MS binding wire inclusive of its supply, etc., complete as specified and directed.
4
-
-
Supply, Fabrication and Erection of Structural Steel work using Tubular Hollow structure steel., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make), loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge. Using angles, rolled steel joists, channels,Plates and other steel sections etc.
7
-
-
BRICK WORK & RR MASONARY WORKS
-
-
-
Brick work using clay bricks as specified at all depths below plinth level if foundation and in plinth simultaneous pointing with same mortar below ground level and ranking out joints above ground level, curing etc. complete as per specification and as directed for foundation and strom water drains using cement Mortar 1:4.
3
-
-
Brick work using clay bricks as specified at all depths and height above plinth level , steel Tubular scaffolding, raking out joints curing etc.complete as per specification and as directed in super structure up to floor V level-Using Cement Mortar 1:4.
25
-
-
Random rubble masonry with hard stone in superstructure above plinth level andup to floor V level, including leveling up with cement concrete 1:6:12 (1 cement : 6 coarse sand : 12 graded stone aggregate 20 mm nominal size) with Cement mortar 1:6 (1 cement : 6 coarse sand) complete as specified and directed.
10
-
-
Providing and laying autoclaved aerated cement blocks (AAC blocks) masonry with 100 mm thick in super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse sand )or mortar recommended by manufaturer or as directed. The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every third course of masonry work etc. complete as specified and directed.
15
-
-
PLASTERING WORKS
-
-
-
Cement Plastering 12 mm thick for wall and ceiling with Cement Mortar 1:4 fininshed smooth finish including hacking of concrete surface, preparation of surface, steel/tubular scaffolding, curing etc., complete as directed.
100
-
-
Cement plastering 15 mm thick for internal walls in cement morar 1:4 fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC and also other places wherever required over brick walls or concrete surface preparation of surface, steel/tubular scaffolding curing etc., complete as directed.
250
-
-
Sand faced plaster 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level upto a height of 10 mm with base coat in Cement Mortar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 4 River Sand} 12mm thick and finishing coat in Cement Mortar1:3 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 3 River Sand} 8mm thick final rendering including addition of approved integrated waterproofing compound @ 2% by weight of cement or as per manufacturer’s Specifications for the base coat of make M/s. Fosroc/Demech/ Huntsman/ Pidilite/ SIKA Qualcrete / MBT/Sunanda Chemicals, making necessary grooves, bands, drip moulds, etc., as required, double steel/tubular scaffolding wherever necessary, curing, etc., complete as specified and directed.
650
-
-
Providing and applying birla white putty or approved equivalent of 1 mm thickness over plastered surface to prepare the surface even and smooth complete.
400
-
-
DEMOLISHING WORKS
-
-
-
Demolishing R.C.C. /PCCwork manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within lead of 2 kilometersas etc., complete as specified and directed by Engineer - in- charge.
2
-
-
Dismantling very carefully the existing Brick masonry in cement motor with plastering and on both sides very carefully at depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacing of useful materials and disposing the unserviceable debris within the lead 2 kilometers etc., complete as specified and directed.
15
-
-
Dismantling the Mosaic tile/ white Glazed tile/Kota stone/ Shahbad stones etc. including removal of bedding mortar, stacking of materials and disposing of debris within lead of 2 kilometers etc. complete and as specified and directed.
75
-
-
SHUTTERING WORKS
-
-
-
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level up to 10 mtr height, vertical, horizontal, inclined including strutting, propping using steel pipes/acro stagging, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed. in Foundations, footings, bases of columns, Lintels, beams, plinth beams, cantilevers, Window, Sill, copings etc, and as directed .
500
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineerin- charge .The elevational area of the scaffolding shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done.
30
-
-
PAINTING WORKS
-
-
-
White washing to walls and ceiling with best quality lime in three coats (using brushes for application) including scaffolding, sand papering, filling crevices with putty and cleaning surfaces etc. complete as specified and directed.
300
-
-
Painting on with three coats of premium acralic emulsion (Asain Apcolite or equivalent) of approved shade and make including including water thinnable priming coat with cement primer, preparing the surfaces, including removal of old paint, if any, sand papering, filling with putty as required,scaffolding and cleaning etc. complete as specified and directed.
750
-
-
Painting with antifungal 100 % premium Acrylic emulsion paint in 3 (Three) coats having 100% acrylic of Asian/Berger/Nerolac makes of first quality and required shade over walls, ceilings etc., including compatible primer, scaffolding upto height of 10m of best Quality Equivalent to Asian ultima, removing whitewash/color wash/old paint, if any, by scrapping with scrubbing machine, sand papering, preparing the surface smooth including necessary repairs to scratches, filling in crevices, holes and cracks etc., with approved filler etc., complete all as specified and directed.
1500
-
-
Painting with synthetic enamel paint in 3 (Three) coats of Asian/Berger/Nerolac make of 1st quality with required shade on wooden/steel doors, windows, ventilators, composite units, louvers, rolling shutters, hand rail and balustrades, plastered surfaces etc., including compatible primer, scaffolding upto height of 10m, removing old paint, if any, by scrapping with scrubbing machine, sand papering, preparing the surface, brushing with wire brushes, scraping with steel scrapper etc., filling in crevices and cracks etc. with approved filler etc., complete as specified and directed.
200
-
-
FLOORING WORKS
-
-
-
Vitrified Full body of size size of tiles 600X600 mm flooring and skirting, treads of staircase ect. of 1 st quality, matt finish/glossy finish and non slippaerry of make sparket, regency, johnson, Somani or any other approved equivalent of required shade, design colour and pattern laid on tile adhesive of pidilite or equilavent including cleaning, close jointed and pointed with matching epoxy Grouting, finished to levels, slope or plum as required including cutting of tiles, acid washing, removing and reinstating the loose and cracked surfaces with suitable repairs etc. complete for corridors, stair entrances, conference room and office blocks corridors etc. complete as specified and directed.
200
-
-
Anti skid tile of size 600X600mm for Floor (GVT) and 600X300 mm for dado(Digtiallty printed ceramic) and repair of existing floors using 8 mm thick of size as mentioned below, glossy or matt finish, of 1 st quality( Spartek, Regency, Johnson, Somani, Nitco Khazaria) or required shade, edge cut, design, colour and pattern over tile adhesive of pidilite or equivalent , close jointed and pointed with matching cement slurry using epoxy grout and edge bedding with to give required colour, finished to levels, slope or plumb as required including cutting of tiles cring, acid washing etc. complete.
200
-
-
Providing and laying Polished Granite/ flamed stone flooring or window sill, Door Choket, Counter and any or any required location in various design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge.-Polished Granite stone slab colour of Black, Cherry/Ruby Red or equivalent.
150
-
-
MISCELLANEOUS WORKS
-
-
-
Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge.-With Material conforming to Grade II (Size Range from 53 mm to .075mm).
50
-
-
Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid one side laminated on both side flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges (100X65X2.5) of required size with necessary full body threaded star headed counter sunk S.S screws, 2 Nos SS Handle, 1Nos SS L Drop and 1 no SS tower bolt , all as per direction of Engineer-In- Charge.-30 mm thickness.
28
-
-
Fixed Glass: Providing and fixing full height glass partition which include 12mm thick saint GLOBIN/MODI GUARD clear toughened glass of approved make supported on Ozone OGL-PR-22 Aluminum section for outer frame. Cost to be inclusive of joints between glass to be filled with clear sealent etc. complete as per instruction of EIC.
25
-
-
Providing and Fixing Mangalore tile profiled color coated Galvalume Sheets for roofings including side elevation design profile, claddings, rain water pipes etc. using sheets in 0.5mm TCT (Total Coated Thickness) and strength not less than 350 N/Sqmm including flashings, corners, ridges, eaves boards, etc., of approved make including fixing the sheets with Stainless Steel self tapping, self drilling and self fastening screws, and EPDM Washers, etc., all complete as directed.
175
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11) conforming to IS 15778 of Ashirvad/Supreme or approved make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe on exposed/recessed/underground surfaces to correct line, level, plumb using clamps as directed. This includes removing of existing pipes and fixtures if required, jointing of pipes & fittings with one step CPVC solvent cement, teflon tape, cost of cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition including testing of joints at cerain locations complete as specified and directed.
-
-
-
20mm dia-concealed including cutting chases and making good the walls etc
25
-
-
25mm dia-concealed including cutting chases and making good the walls etc
25
-
-
25mm dia-on exposed surface
8
-
-
40mm dia-on exposed surface
18
-
-
Providing and fixing heavy quality 15mm C. P. brass wall mounted BIB TAPS of Hindware (Cat no. F730041)/Jaquar/Parryware/Jaquar make or equivalent with wall flange confirming to IS:8931.
10
-
-
Supplying and fixing following size uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) of Grade B laid in floor & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, assorted fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, etc, complete as specified and directed.
-
-
-
110 mm DN
20
-
-
Providing uPVC Floor Trap / Nahani Trap of following size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed.
-
-
-
Nahani Trap of 110 X 75mm size of Ashirvad (70001249)/Supreme make
8
-
-
Providing and fixing heavy quality 15 mm C. P. brass Non Telephonic wall mixer of Jaquar/Parryware /Hindware(F730016CP) wall flange and confirming to IS:8931.
4
-
-
Providing and fixing best quality vitreous chinaware under the counter WASH BASIN of size close to 605mm x 430 mm x 200mm , of make Jaquar(CNS-WHT-705)/Hindware/Parryware conforming to IS: 2556 Part IV including CP brass waste coupling, necessary supports, removal of wxisting wash basin if required, complete as specified and directed.
4
-
-
Providing and fixing 15 mm n. b. heavy quality C. P. brass angle valve confirming to IS 8931 of make Parryware Code /hindware (F730039CP)/Jaquar or equivalent.
10
-
-
Providing and fixing heavy quality 15 mm C. P. brass Deck Mounted Sink Cock of Parryware/Hindware make (F730034CP) or equivalent confirming to IS:8931.
6
-
-
Providing and fixing C. P. brass TOWEL RAIL of approved design and make of 600mm length, fixed to wall with C. P. brass screws, screwed on to rawl plugs etc., complete of Parry- ware make/Hindware/Jaquar or equivalent.
4
-
-
Providing and fixing heavy quality 15 mm C. P. brass 2 way bib cock of Parryware /Hindware/Jaquar make (F330004CP) or equivalent with wall flange and confirming to IS:8931.
4
-
-
Providing, fabricating, supplying and fixing 4mm thick panels of aluminium composite panel cladding in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick) exculding aluminum frame fixing on Structural frame (paid Separtely) including required scaffolding complete as directed by Engineer-in-charge.
30
-
-
Supplying, fixing and installation of hollow SS finished Titanium letter of 1 mm thick sheet of required height and width having LED waterproofed light fixing up to height of 6 mtr level including all electrical accessories complete as per direction of Engineer-in charge (Near by Electrical Source will be provided by the department.
20
-
-
CRICKET GROUND WORKS
-
-
-
Excavation and removing Existing grass -
1) Excavation of Existing surface soil up to depth of 150 mm.
2) Deweeding of grass fom exiting ground and make it free from grass, weeds and any unwanted material.
6000
-
-
Ground Preparation:-
1) Level the ground by roatating a vibro roller of 15/30 Tn Capacity along with spraying of water.
2) Filling the good soil excavated from around of 3 km lead and spreading around the ground at a uniform thickness of 150 mm.
3) Mix vermi compost @ 2.5 kg/Sqm in newly laid soil and mix it properly. 4) Compact the soil making proper leveling @ slope of 1:200 to maintain the slope.
6000
-
-
Grassing:-
Supply and planting of barmuda grass at a ratio of 1:5 around the ground including watering and mainteance of grass for 45 days till the grass forms thick lawn, free from weed and fit for moving incluidng pesticide and insedticide if any required.
6000
-
-
Mainteance of Lawn:-
Complete Mainteance for 3 months of cricket pavillion ground along with pitch including weeding, hoeing, replacment of damaged grass with barmuda grass ( if required), filling of gap, watering, mowing, cutting or treming by diesel lawn mover , removal of waste appling of insecticides, pesticide as per the requirement complete with removal of unwanted material ( The rate shall be included of i.e cost of pestiside, Lawn mover, Flexible pipe for watering required fuel etc.)
For 03 moths minimum 4 nos oflabour shall be deployed by the contractor.
1
-
-
Cricket Cage:
1) Excavation of 600mmX600 mm for fixing vertical post.
2) Grouting the vertical Post using 1:1.5:3 ratio concrete.
3) poles of 50 mm dia vertical Poles of min. 2 mm thick round shape
4) Vertical Pole to pole distace shall be 14 feet.
5) Horizontal Purlin ( Top middle & Bottom) -3 horizontal member equally dicided in 12 feet high
6) Top cover by 50 dia pipe having middle horizantal bracing of same dia of mini 2 mm thick.
7) 2 Feet Grounting inside & 12 feet clear height from Ground.
8) 1 Coat Zin Cromate primer and 2 coat Enamel paitned 9) Fixing of green colour HDPE Nylon Cricket net.
Note:- Surface Area of the facility will be measured for payment.
300
-
-
TENNIS COURT
-
-
-
1) Removal of Existing old Degraded Acrylic 2) First Tack Coat - Providing and applying primer coat with bitumen emulsion (medium setting) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
3) Compaction of Bituminous Layer of upto 30 mm Thickness using mix of 20 mm and 12 MM Stone with 60-70 Grade Bitumen.Bituminous binder percentage should be upto 3.5 % .
4)The compaction of the BM layer to be done using road roller of capacity 8-10 ton;
5) Compacting Layer of AC of Upto 20 mm Thickness using 6mm Stone/ Baby Chips ( Mixture of 0-6mm Stones Devoid of Dust)mixed with 60-70 Grade Bitumen. Bituminous binder percentage should be upto 3.5- 4.0%. 6) The compaction of the AC layer to be done using road roller of capacity 8-10 ton 7) Final Layer of Seal Coat using Stone Dust with Bitumen to make the surface appropriate for Synthetic Installation. Cold rolling to be done immediately next day of applying seal coat in the early morning hours when the climate is cold as compared to rest part of the day.
8) Compaction to be done with 8-10 ton;
1200
-
-
Supply and installation of ITF certified 8 layers acrylic system with thickness up to 3mm. The flooring should be certified by International Tennis Federation (ITF) and should have application as first layer of primer (% 100 acrylic latex based emulsion to improve bond of acrylic court system to the asphalt surface having consumption ratio of 0.014kg/sqft), second layer of acrylic Resurfacer (Filling and smoothing asphalt or concrete surfaces in preparation for Acryflex T tennis court system. And also fills the surface chips, voids and conceals repairs while providing a smooth surface for color coating. It should have a consumption ratio of 0.046kg/sqft), Third, Fourth & Fifth layer of Unirubber liquid cushion layers at a consumption ratio of 0.10 kgs per sqft all together, Sixth & Seventh layer of Precoat (Quartz filled % 100 acrylic latex based textured tennis topcoat with consumption ratio of 0.078 kg/sqft) and Eighth layer of Topcoat (100% acrylic latex polymer & colour coat for the finished surface to protect from UV. It should have consumption ratio of 0.023 kg/sft). On top of these 8 layers, the line marking should be done with Overline paint (% 100 acrylic latex based high hiding line paints. It should have consumption ratio of 4 kg/court). The acrylic resurfacer must have silica sand infill to be embedded into it with consumption ratio of 0.065 kg/sqft. The product must be approved/licensed/preferred by the respective International Sports Federation & used at the Indian/International Championships recognized by the respective Regional /International Sports Federation.
1200
-
-
Chain Mesh for tennis court:
(1) Excavation of 600mm x 600mm (2) Grouting of vertical poles using M20 grade concrete putting shutterin all around (3) Chain linked of 50 x 50, 3 mm thickness with aldrop and hinges for door. and separate frame for Door with same material.
(4) 50mm dia, 2 mm thick MS Poles (Vertical) (5) 50 mmdia, 2 mm MS Poles (Horizontal)
(6) Vertical pole to pole distance 10'.
(7) Horizontal Purlins( Top middle & bottom)- 3 horizontal members equally divided in 10 feet high.
(8) 2' grouting inside & 10' clear height from the ground.
(9) 1 coat Zinc Oxide Primer & 2 coat Enamel painted (Bus Green Color)
Note:- Surface Area of the facility will be measured for payment.
180
-
-
Volley Ball Court
-
-
-
(1) Excavation as per site requirement ( Surface Dressing) upto 6inches- To make Proper Slope in the ground and remove all vegetation from the Existing Soil Surface.
(2) Slope to be created width wise by giving a slope gradient of 1 inch in every 10 feet (Slope to be given as per approved drawings )
(3) Compaction to be done using 8-12 ton Static Roller, Expected: 95% Compaction Ratio;
(4) Chemical Treatment of Entire Area to make Land infertile, this will be done by spraying diluted chemical mixed with water ( Weedicide treatment -Glycel or equivalent) to be done by mixing the chemical in Water as per the mixing ratio given on the box of the chemical).
(5) Layer of Compacted 4" WMM using Stone Size 40 MM to 60 MM And Stone Dust ( for WMM ) in the ratio of 70:30 where stone is 70 % and Stone Dust Compaction of same in One Layer using Road Rolled of 8-12 ton capacity.
(6) Rolling to be done in both wet and Dryphases of WMM; (7) First Tack Coat - Providing and applying primer coat with bitumen emulsion (medium setting) on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
(8) Compaction of Bituminous Layer of upto 30 mm Thickness using mix of 20 mm and 12 MM Stone with 60-70 Grade Bitumen.Bituminous binder percentage should be upto 3.5 % .
(9)The compaction of the BM layer to be done using road roller of capacity 8-10 ton; (10) Compacting Layer of AC of Upto 20 mm Thickness using 6mm Stone/ Baby Chips ( Mixture of 0-6mm Stones Devoid of Dust)mixed with 60-70 Grade Bitumen. Bituminous binder percentage should be upto 3.5- 4.0%. (11) The compaction of the AC layer to be done using road roller of capacity 8-10 ton (12) Final Layer of Seal Coat using Stone Dust with Bitumen to make the surface appropriate for Synthetic Installation. Cold rolling to be done immediately next day of applying seal coat in the early morning hours when the climate is cold as compared to rest part of the day.
(13) Compaction to be done with 8-10 ton;
330
-
-
Supply and Installation of European Origin, FIBA, BWF & IHF Certified, Point Elastic polyurethane Flooring having thickness of 11mm comprising of 11mm Prefabricated SBR Mat followed by 2mm PU Coatings. Seamless, non-porous and smooth surface for Very good resiliency for comfort, injury prevention, Sustainability through high content of recycled and renewable raw materials in combination with lasting performance through very good mechanical strength, wear resistance and easy maintenance, repair & resurface procedures. System consist of SBR Matt being laid using two component PU Adhesive followed by Sealer to fill in all the pores of SBR mat, 2 coats of PU Resin Layer followed by Top PU Coat and game line marking. Product should meet European standards EN-14904 - P1 category, Shock Absorption: 28% as per EN 14808, Vertical Deformation: 1.4mm as per EN 14809, Friction value according to EN 13036-4 should be on or above 107, Ball Bounce: 98% according to EN 12235, Gloss: 5% as per EN 2813, Resistance to Rolling Load: ≥ 1500 N as per EN 1569, Resistance to impact: ≥ 800 gr @ 10°C & ≥ 1200 gr @ 23°C as per EN 1517, Resistance to indentation: 0,35 mm @ 5 min & 0,15 mm @ 24 hrs as per EN 1516, Resistance to wear: 340 mg as per EN ISO 5470, Flammability: Bfl-S2 as per EN 13501-1, Improvement impact sound insulation (∆Lw): 21dB according to ISO 717-2, V.O.C. content – adhesive/resins Solvent free, Resin composition Free of solvents and heavy metals, Elongation at break: structure 150 % as per DIN 53455, Tensile strength: structure 8 N/mm² according to DIN 53455, Tear strength: structure 25 N/mm according to DIN 53515. Consumption of materials has be as per standards which is 0.90Kg/sqm Adhesive for SBR Matt, 0.5Kg/sqm Sealer, 2.8Kg/sqm PU Wear Coating followed by 0.14Kgsqm Top PU Color Coat.
330
-
-
Chain Mesh for Volleyball courts (1) Excavation of 600mm* 600mm (2) Grouting of vertical poles using M20 grade concrete (3) Chain linked of 50 x 50, 3 mm thickness with aldrop and hinges for door. (4) Total thickness will be 3mm with the same tolerance as mentioned. (5) Color Bus green enumal Paint to mesh & poles.
Poles: (6) 50mm Dia MS Poles (Vertical) (7) 50 mm MS Poles (Horizontal) (8) Thickness 2mm Shape - Round. (9) Vertical pole to pole distance 10Feet (10) Horizontal Purlins( Top middle & bottom)- 3 horizontal members equally divided in 10 feet high (11) 2 Feet grouting inside & 10 feet clear height from the ground.
(12) 1 coat Zinc Oxide Primer & 2 coat Enamel painted (Bus Green Color)
Note:- Surface Area of the facility will be measured for payment. ( Few Area of Esixting Baseketball ground will also fenced)
500
-
-
Supply and fixing of LED flood lights along with pole:
(1) Excavation of 1MTR and grouting of poles using M20 grade concrete. (2) 1 coat Zinc Oxide Primer & 2 coat Enamel painted (Bus Green Color)
(3) Type of light-150 watts LED flood light. (4) Aluminium Die casting used.
(5) Toughen or tempered glass. (6) IP65(Water & weather proof) Drivers & choke used.
(7) Driver 440 volt protections. (8) Drivers at 300 Volt cutoff.
(9) Surge protection device (SPD) used. (10) OSRAM or equivalent GV LED part used. LED light fitting make philips/bajaj/Surya
(11)2TC heat sink compound used. (12) 15"width X 17" height,Weight-2.25 Kgs.
(13) 4 Lights on each MS pole (14) Poles of 20 ft height
(15) 150mm outer Dia X 3mm Thickness MS Base Pipe of Height 20Ft (16)125mm outer Dia X 3mm Thickness MS Top Pipe of Height 3 Ft
(17) 4 Feet Grouted Inside & 20 Ft Clear Height from the Subbase(Total Height of Pole is 24Ft). (18) Square Pipe of 1 feet Ribs to be welded on either side of Pole to Form ladder System.
(19) Resting Stand shall be provided on Top of Pole
(20) Excavation, Concrete Filling & Grouting of Poles on marked area.
(21) Junction Box Shall be provided on bottom of Poles
(22) 2 Coat Emulsion Green painting to be done with Proper uniform finish (23) Suppy & Installation of 4 no's of 150 Watts LED Lights On the existing fencing vertical pole.
(24) Cabling with all the accessories(cable lug, MCB, isolation tape, screws, nut bolts & Control Panel) (25)2.5 sqmm 3 core wire (coil) should run inside the MS Poles & wiring from the base of Pole.
(26)Supply & Installation of 4-WAY SPN DB with 1 no of 32A DOUBLE POLE MCB As incomer & 2 Nos of 16A SP MCB
2
-
-
415 V Power Distribution Boards Distribution Boards & Sockets Supply and installation of Legrand/Hager/ Havells/ MDS/Siemens make vertical model double door TPN/SPN Distribution boards with minimun IP 43 of following sizes
-
-
-
12 way TPN MCCB DB with following components.
a. 100 A TPN MCCB with earth fault release and adjustible settings - 1 No Incomer
b. 32 A TP MCB - 4 Nos
c. 25 A SP MCB - 24 Nos
-
-
-
Supply
1
-
-
Installation
1
-
-
8 way TPN MCB DB along with the following components
a. 63 A , 100mA FP RCBO - 1 No Incomer
b. 25 A TP MCB - 3 Nos
c. 16 A SP MCB - 8 Nos
d. 10 A SP MCB - 7 Nos
-
-
-
Supply
1
-
-
Installation
1
-
-
12 Way Horizontal SPN MCB DB with following components.
a. 32A DP RCBO incomer - 1 No
b. 10A/25A SP MCB - 8Nos
-
-
-
Supply
3
-
-
Installation
3
-
-
8 Way Horizontal SPN MCB DB with following components.
a. 32A DP RCCB incomer - 1 No
b. 10A/25A SP MCB - 6Nos
-
-
-
Supply
2
-
-
Installation
2
-
-
Supply and fixing of following Industrial Plug and Sockets of L&T/ Legrand/ MDS/ Siemens/ Schneider make
-
-
-
3 modular switchboard with 2mm thick MS Base box, 16A Switch and 16A Universal sockets mounted on 3mm thick hylem sheet
-
-
-
Supply
10
-
-
Installation
10
-
-
Supply and installation of 63 A SDFU of L&T/Siemens/C&S make in sheet steel enclosure with suitable cable boxes on either end and required hardware for fixing the SDFU on wall
-
-
-
Supply
2
-
-
Installation
2
-
-
Light fittings & Fans - Supply and installation of following light fittings of Philips/Wipro/Bajaj make with all accessories like supporting hard ware downrods etc as required to complete the installation in all respects.
-
-
-
Wellglass LED luminaire with die cast aluminum construction with IP 65, inbuilt surge protection upto 4KV, lumen out put 3500 Lumens similar to Philips DuraLED BY300P
-
-
-
Supply
5
-
-
Installation
5
-
-
Industrial LED tube light fitting with lumen out put 1500 Lumens similar to Philips with required downrods/ tierods to suspend the fitting from ceiling
-
-
-
Supply
60
-
-
Installation
60
-
-
Surface cum recess mounted LED fittings with lumen output3000 similar to philips full glow RC380B including required supports (hooks/chain/wire etc) from ceiling to fix the fitting on false ceiling
-
-
-
Supply
5
-
-
Installation
5
-
-
Flood light LED luminaire with pressure die cast housing with minimum IP 65, lumen out put 3500 Lumens similar to Philips Uni flood BVP 120 along with required accessories for fixing.
-
-
-
Supply
4
-
-
Installation
4
-
-
Supply and fixing of 230V,1200mm sweep Energy efficient 5 star rated BLDC ceiling fans with required downrods of CG/ Khaitan/Orient/Bajaj/ Almonard/ Usha/ Marathon make with all required accessories.
Warranty: 2 Years
-
-
-
Supply
25
-
-
Installation
25
-
-
Supply and fixing of following exhaust fans of CG/ Khaitan/ Orient/ Bajaj/ Almonard/ Usha/ Marathon make with all required supports and accessories
-
-
-
300mm sweep Single phase heavy duty industrial exhaust Fans with air delivery 1100 M3/Hr
-
-
-
Supply
5
-
-
Installation
5
-
-
Cables and Terminations - Supply and laying of following sizes of 1.1 KV grade XLPE insulated, PVC extruded inner sheathed, armoured, FRLS PVC ST2 outersheathed cable on cable trays/trenches with all accessories Make: Polycab / Universal / Torrent / RPG / KEI.
-
-
-
3.5 core 240 sqmm armoured Aluminum cable
-
-
-
Supply
400
-
-
Installation
400
-
-
4 core 25 sqmm armoured Aluminum cable
-
-
-
Supply
500
-
-
Installation
500
-
-
4 core 4 sqmm armoured, stranded Copper cable
-
-
-
Supply
500
-
-
Installation
500
-
-
3 core 1.5 Sqmm flexible copper cable
-
-
-
Supply
300
-
-
Installation
300
-
-
Providing end terminations for following sizes of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty glands, heavy duty long neck copper lugs etc complete.
Make of glands/ Lugs: Dowells/Jainson/HMI/Comet
-
-
-
3.5 core 240 Sqmm armoured Aluminum cable
-
-
-
Supply
4
-
-
Installation
4
-
-
4 core 25 sqmm armoured Aluminum cable
-
-
-
Supply
4
-
-
Installation
4
-
-
4 core 4 sqmm armoured, stranded Copper cable
-
-
-
Supply
6
-
-
Installation
6
-
-
Supply and providing of Straight Through joints for 415 V grade 3.5 core 240 sq mm XLPE insulated & PVC sheathed armoured aluminium conductor cables with RAYCHEM / 3M make heat shrinkable cable joint kits, copper crimping type lugs and other accessories as required for completion of termination in all respects.
1
-
-
Wiring and switchboards- Suypply and pulling of following sizes of flexible FR copper wires of Polycab/Finolex / L&T/ Anchor /GEM make to be drawn in 2mm thick PVC conduit/channels with ferruling on both ends excluding cost of pipes, channels and switch boards.
-
-
-
1.5 Sqmm FR Copper wire
-
-
-
Supply
7000
-
-
Installation
7000
-
-
2.5 Sqmm FR Copper wire
-
-
-
Supply
2000
-
-
Installation
2000
-
-
4 Sq.mm FR Copper wire
-
-
-
Supply
1000
-
-
Installation
1000
-
-
10 Sq.mm FR Copper wire
-
-
-
Supply
100
-
-
Installation
100
-
-
Supply and installation of DLP plastic trunking system of Legrand/ Hager/Schneider make with required clamps for fixing, cover, end caps etc complete including required angles and junctions of following sizes
-
-
-
105x50
-
-
-
Supply
20
-
-
Installation
20
-
-
32x20
-
-
-
Supply
300
-
-
Installation
300
-
-
32x12.5
-
-
-
Supply
500
-
-
Installation
500
-
-
Supply and installation of 2 mm thick 25 mm dia FRLS PVC conduits of Sudhakar/AKG industries make with ISI marking including junctions, bends, clamps etc complete.
-
-
-
Supply
150
-
-
Installation
150
-
-
Supply and installation of modular surface mounted PVC switch boards (without PVC box), with face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered sockets of Crabtree/ Northwest/ Legrand/ Schneider Electric
-
-
-
3 modular switchboard with 16A Switch and 16A Universal socket
-
-
-
Supply
20
-
-
Installation
20
-
-
6 modular switchboard with 4 Nos 6A Switches and 1No 6A Socket
-
-
-
Supply
20
-
-
Installation
20
-
-
8 modular switch board with 7 Nos 6A Switches, 1 No Fan regulator
-
-
-
Supply
20
-
-
Installation
20
-
-
12 modular switchboard with 2 Nos 6A Sockets and 8 Nos 6A Switches
-
-
-
Supply
12
-
-
Installation
12
-
-
Supply and installation of modular surface mounted PVC switch boards with PVC box, face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered sockets of Crabtree/ Northwest/ Legrand/ Schneider Electric
-
-
-
3 modular switchboard with 16A Switch and 16A Universal socket
-
-
-
Supply
2
-
-
Installation
2
-
-
6 modular switchboard with with 2 Nos 25A DP MCB
-
-
-
Supply
2
-
-
Installation
2
-
-
6 modular switchboard with 4 Nos 6A Switches and 1No 6A Socket
-
-
-
Supply
2
-
-
Installation
2
-
-
8 modular switch board with 6 Nos 6A Switches, 1 No 6A Socket
-
-
-
Supply
2
-
-
Installation
2
-
-
12 modular PVC switchboards with 4 Nos 10A switches and 4 Nos 10A shuttered multipurpose sockets
-
-
-
Supply
2
-
-
Installation
2
-
-
16 modular PVC switchboards with 5 Nos 10A switches and 5 Nos 10A shuttered multipurpose sockets
-
-
-
Supply
2
-
-
Installation
2
-
-
18 modular PVC Switchboards with 9 Nos of 10A Switches and 9 Fan Regulators
-
-
-
Supply
2
-
-
Installation
2
-
-
12 modular PVC switchboards with 8 Nos 6A switches and 4 Nos Fan Regulators
-
-
-
Supply
2
-
-
Installation
2
-
-
Concealed wiring items
-
-
-
Supply and installation of 25 mm dia 1.6 mm thick Sudhakar/AKG make PVC conduits confirming to IS with accessories like bends, couplers etc in roof slab, wall including chasing of wall fixing the conduits and filling the chase with cement mortar and making good of the surface etc complete
-
-
-
Supply
700
-
-
Installation
700
-
-
Supply and installation of 25 mm dia 1.6 mm thick Sudhakar/AKG make PVC Junction boxes in wall including chasing of wall, fixing the junction box and filling the chase with cement mortar and making good of the surface etc complete
-
-
-
Supply
40
-
-
Installation
40
-
-
Supply and installation of Sudhakar/AKG make 25 mm dia 1.6 mm thick PVC Deep junction boxes in slab
-
-
-
Supply
15
-
-
Installation
15
-
-
Supply and installation of 150 mm dia PVC fan boxes with MS hook for supporting the fan on to the ceiling with suitable cover
-
-
-
Supply
15
-
-
Installation
15
-
-
Supply and Installation of 16 guage sheet steel switch board boxes of following sizes including chasing of wall and filling the gap with cement mortar and making good of the surface etc complete.
Make: Legrand or similar
-
-
-
3 Module
20
-
-
6 Module
20
-
-
8 Module
20
-
-
12 Module
20
-
-
18 Module
20
-
-
Earthing and Lightning protection
-
-
-
Supply and installation of maintenance free earthing stations of ASHLOK/ERICO/JEF make with copper bonded steel ground rod with a round 20mm dia and 3 Mts long , 250 micron Cu bonded Ground Enhancing Material (GEM), inter connecting earth tape between earthing stations and back fill material.Construction of masonary chamber of 450 x 450 mm with CI cover, earth station markers etc complete. Pit should be as per IS 3043 Make: Ashlok, Erico, JEF.
3
-
-
Supply and fixing of 50 x 6 mm hot dip galvanised GI strip for earthing by clamping on walls/trays/trench with all required accessories
-
-
-
Supply
100
-
-
Installation
100
-
-
Supply and fixing of 25 x 6 mm hot dip galvanised GI strip for lightning protection at a height of 12m by clamping on roof sheets/walls/columns with insulators, clamps and all required hardware.
-
-
-
Supply
250
-
-
Installation
250
-
-
Civil works
-
-
-
Excavation and back filling in cement concrete for laying of cables, consolidation, removal of excess earth, etc complete.
2
-
-
Excavation and back filling in hard murram for laying of cables, consolidation, removal of excess earth, etc complete.
75
-
-
Supply and installation of well burnt brick of size 230 x 115 x 75 mm for cable protection
2000
-
-
Supply and installation of RCC tiles of size 500 x 250 x 50 mm made of 1:2:4 mix concrete and 8 mm steel rods 3 on each side
550
-
-
Laying of Cement concrete of 1:2:4 using Pazzolona Portland cement conforming to IS 1489, river sand and graded stone aggregates of 40mm maximum size
1.5
-
-
Miscellaneous
-
-
-
Supply and installation of 150 mm width, 50mm height with minimum 2mm thickness GI perforated cable trays
-
-
-
Supply
15
-
-
Installation
15
-
-
Supply and installation of 2mm thick powder coated 3 way MS junction boxes along with 6A 4 way connectors
-
-
-
Supply
2
-
-
Installation
2
-
-
Supply and fixing of 100 mm X 25 mm anodised Aluminium cable tags engraved on black back ground with name of the load along with required hardware for fixing the lables on to the cables.
10
-
-
Supply and installation of cable route markers / joint markers made out of cast iron of size 250 x 150 x 10 mm embossed with "HT CABLE" along with 40 x 40 x 6 mm MS angle of 600 mm long and 200 x 200 x 300 mm concrete block
-
-
-
Supply
5
-
-
Installation
5
-
-
Suply and installation of structural steel like channels, angles etc for fabriaction and erection of cable trays supports, light fitting supports etc and painting of the same with red oxide and 2 coats of grey enamel paint. Rate should also include the required bolts and nuts for fixing of supports
Make of Structural steel: TATA, Vizag Steel, Jindal Ispat, SAIL
-
-
-
Supply
100
-
-
Installation
100
-
-
Supply and installation of Class B 25 mm dia MS conduit with ISI marking including required accessories etc complete
-
-
-
Supply
10
-
-
Installation
10
-
-
Removal of old electrical items from an height of 3.5M and shifting them to an identified location within 2 Kms to enable rewiring and making good finish of the surface etc complete
-
-
-
Lights
10
-
-
Fan
10
-
-
Wiring
300
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements