Nuclear Fuel Complex Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Eprocure
Opening Date20 May 2024
Closing Date13 Jun 2024
Tender Amount₹ 1,40,00,000
Costs
EMD
₹ 2,80,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Civil, Electrical And Piping Works For Construction Of Collection And Settling Tank At Nfc
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NFC_807995_1Bid Award Id
ViewTender No
C/1344/2024Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
b) Above 1.50 m to 3.00 m depth from average ground level.
470
-
-
Excavation in TRENCHES for pipes, sewers, etc in all soils except soft and hard rock from average ground level including dewatering if necessary, dressing bottom to required level, profile/slope, back filling in trenches with selected excavated materials in layers not exceeding 250 mm, consolidating, leveling, clearing of all the areas involving excavation of all grass,rank vegetation, shrubs,bushes,cutting of trees upto 300mm grith measured at 1.0 mtr above ground level disposing the spoil within a distance of 50m for ,storm water drains, electrical cables trenches etc.,
-
-
-
a) Upto 1.50 m depth from average ground level for
180
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
30
-
-
Earth work in excavation by mechanical means (Hydraulic excavator/breaker)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineerin- charge.
-
-
-
Ordinary rock
390
-
-
Hard rock (blasting prohibited)
130
-
-
Dismantling/breaking the existing plain cement concrete surfaces/bitumen road/soling carefully in flooring, ramp etc. to the required size, using pneumatic cutters or any approved means including disposing of debris within a distance of 50 m etc., complete as specified and directed.
10
-
-
Lead charges upto 1KM or part thereof for additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock , other unserviceable materials etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% and 50% for rock
-
-
-
a) for soil and fine materials
1250
-
-
b) for rock, RR masoary , debris etc
520
-
-
Reinforced Cement Concrete by insitu mixing by WEIGH BATCHING or RMC of Ultra Tech, Birla Ready Mix make of Grade M - 35 (Minimum Cement Content – 370Kg/Cum) using Portland Pozzolana Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with graded stone aggregate of 20mm maximum size and sand at and at all depths and heights including mixing with superplasticizer of make M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturer’s Specifications, conveying / pumping / placing at all depths / heights below / above plinth level, consolidation, finishing as specified, curing, etc., including providing and placing cover blocks of required sizes in cement mortar 1:1, etc., but excluding Formwork and Steel Reinforcement complete as specified and directed. NOTE:-The concrete of RCC of any grade if it is insitu (site mix) the sand to be used shall be River sand. In case of RMC, the manufactured sand. The blended cement i.e., PPC shall not have more than 35% of pozzolanas.
-
-
-
a) Below FFL
200
-
-
b) Above FFL
10
-
-
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Ambuja, Birla make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
30
-
-
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level, vertical, horizontal, inclined including strutting, propping using steel pipes/acro stagging, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed for Foundation, pedestals, plinth beams, etc.,
-
-
-
a) Below and Upto Finish Floor Level
425
-
-
b) Above Finish Floor Level
30
-
-
Brick work using flyash bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116 ) at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
25
-
-
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag,Sail, JSW make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
30
-
-
Providing and Placing in position suitable PVC water stops conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete : Serrated with central bulb (225 mm wide, 8-11 mm thick)
150
-
-
Providing and mixing integral crystalline admixture for water proofing treatment to RCC structures like basement raft, retaining walls, reservior, sewage & water treatment plant, tunnels / subway and bridge deck etc. at the time of transporting of concrete into the drum of the ready-mix truck , using integral crystalline admixture @0.80% (minimum) to the weight of cement content per cubic meter of concrete) or higher as recommended by the manufacturer’s specification in reinforced cement concrete at site of work. The material shall meet the requirements as specified in ACI-212-3R-2010 i.e. by reducing permeability of concrete by more than 90%, compared with control concrete as per DIN 1048 and resistant to 16 bar hydrostatic pressure. The crystalline admixture shall be capable of self-healing of cracks up to a width of 0.50mm. The work shall be carried out all complete as per specification and the direction of the Engineer-in-charge. The product performance shall carry guarantee for 10 years against any leakage.
725
-
-
Construction Joint Treatment:
All construction/ Cold Joints shall be opened in V-groove size to maximum depth of 25 mm. Fixing PVC Nozzle between 1 m center to center and injecting Cement, Water, Dr. Fixit Pidicrete AM at a dosage of 225 gm/ Bag of Cement and Dr. Fixit Pidicrete URP at a dosage of 1 kg/ Bag of Cement Slurry through proper Grouting Pump/Machine and sealing the joints with Polymer Modified Mortar using Cement : Sand = 1 : 4 and Dr. Fixit Pidicrete URP @ 2 kg per Bag of Cement. After grouting, the nozzles must be cut and levelled with the raft. The rate shall be inclusive of testing the tank for water tightness.
150
-
-
Angle Fillet: All the junctions of floor and vertical sides shall be provided with cement-sand screed based angle fillet of 75 mm X 75 mm. The screed shall be admixed with Dr. Fixit Pidicrete URP a latex based additive (Dosage -2 liter / 50 kg cement bag), that will provide strength and resistance to water leakage.
85
-
-
Supplying and applying of two coats of epoxy coating Dr. Fixit Dampguard Classic of M/s Pidilite Industries make or equivalent material of FOSROC/ SIKA/ BASF/ SUNANDA/KRISHNA of @0.4 kg/Sqm or as per manufacturer's specification in two coats.
400
-
-
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
-
-
-
a) For Rolled steel sections / plane plates/ chequered plates
3.6
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
250
-
-
Providing and fixing hand rail of GI pipe of approved size by welding etc. to steel ladder railing, balcony railing, staircase railing and similar works, including applying priming coat of approved steel primer.
475
-
-
Supplying and fixing 10 Gauge weld mesh of size 50mm x50 mm by welding/screwing for fixing to structural steel/ RCC/ brickwork. The weld mesh shall be fixed as per drawing and directions of Engineer in Charge
120
-
-
Supply and fabrication of ash collection tank with SS-304 as per drawing.
-
-
-
Supply, Fabrication and Erection of Structural Steel work using SS 304, etc., at all levels above and below plinth level including supplying of steel sections cutting, bending, fitting the same with necessary welding / nut bolt arrangement.
340
-
-
Supplying and fixing SS wire mesh of wire dia 2mm and opening size of 2 mm X 2 mm welding/screwing for fixing to SS frame. The wire mesh shall be fixed as per drawing and directions of Engineer in Charge
50
-
-
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge. ( M.S hold fast / lugs or SS dash fastners shall be paid for separately). Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
Frame Size 65 x 100 mm
6
-
-
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid decorative type flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Minimum compressive strength of 2200 N ( Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent. WPC is to be laminated with pvc foil of minimum 14 microns , thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, all as per direction of engineer in Charge. ( Note : stainless steel butt hinges and necessary S.S screws shall be paid separately).
-
-
-
35 mm Thick
2.5
-
-
Supplying and fixing at and at all heights above plinth level hydraulic door closures of ‘EVERITE’/Godrej make or approved equivalent confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed. for GH
1
-
-
Supplying only approved anodized extruded aluminium heavy quality butt hinges generally conforming to IS specifications CLASSIC, JYOTHI make or approved equivalent make) of size100X75X4mm with cadmium plated wood screws of appropriate size etc., complete as directed for doors etc.
3
-
-
Providing and Fixing Trapezoidal profiled color coated Galvalume Sheets for roofings, claddings, rain water pipes etc. using sheets in 0.5mm TCT (Total Coated Thickness) and strength not less than 350 N/Sqmm including flashings, corners, ridges, eaves boards, etc., of approved make including fixing the sheets with Stainless Steel self tapping, self drilling and self fastening screws, and EPDM Washers, etc., all complete as directed.
90
-
-
Cement plastering 20 mm thick in 2 coats over masonary and concrete surfaces upto a height of 10 mtr with base coat of 12 mm thickness in cement mortar 1:4 and finishing coat of 8mm thickness in cement mortar 1:3 (smooth finish), final rendering,double scaffolding wherever necessary ,hacking of concrete surfaces, etc complete.
100
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives - Ultima of Asian paint or equivalent. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
100
-
-
Supply and grouting, column base, anchor holes, holes, pocket foundation tops etc, mixing placing curing etc with non shrink, free flow, general purpose GP2 grout of approved make (Fosroc, SIKA, pidilite, STP, BASF, ESSAR, ACC) as per manufacturers specification.
600
-
-
Providing and laying non-pressure NP2 class (light duty) 300 mm dia R.C.C. pipes with collars jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete
50
-
-
Electrical works
-
-
-
Supply, installation, testing and commissioning of 415V, 160A, 25KA/1sec TPN Power Distribution Board made out of 2mm thick CRCA steel with the following components generally as specified in the specification and IE Rules as per components indicated therein.
All PDBs shall have:
a. LED type R,Y,B indicating lamps with MCBs to be connected on line side - 1 set
b. Digital multi function meter with facility to indicate all the 3 line voltages, currents, power, energy to be connected on bus side with necessary CTs, MCBs, etc -1set i) 160 A adjustable type microprocessor based TPN MCCB with inbuilt earth fault release - 1No Incomer
ii) 37 kW HP DOL starter with required rating SFU incomer, 85A AC-3 duty Power Contactor with 2NO+2NC auxilary contactor, Over load relay 45-75 A, Mushroom type Emergency Stop Push buttons, Start /Stop Push Buttons, Control ON/OFF Push Button, ON/OFF/TRIP indication lamps with all internal wiring -2 Nos
iii) 40A microprocessor based TPN MCCB with inbuilt earth fault release- 2 Nos
-
-
-
Supply
1
-
-
Installation
1
-
-
Supply and installation of 12 Way Horizontal SPN MCB DB with following components.
a. 16 A DP 30mA RCBO incomer - 1 No
b. (6-10)A SP MCB - 8Nos
Note: RCBO& MCBs shall be C rated and indicative type
Makes of DB/MCCB/MCB/RCBO: HAGER, HAVELLS , MDS, LEGRAND, L&T, SCHNEIDER, SIEMENS
Note: Indicative type MCBs are preferred
-
-
-
Supply
2
-
-
Installation
2
-
-
Supply and laying of following sizes of 1.1 KV grade XLPE insulated, PVC ST2 extruded inner sheathed, armoured, FRLS PVC ST2 outersheathed cable on cable trays/trenches with all accessories
Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED, RALLISON, FINOLEX, SPM wires & cables ltd, GEM cables & conductors ltd, Cable corporation of India ltd
-
-
-
3.5C x 95 sqmm Al cable
-
-
-
Supply
300
-
-
Installation
300
-
-
3C x 35 sqmm Al cable
-
-
-
Supply
200
-
-
Installation
200
-
-
4C 4 Sq.mm Cu cable
-
-
-
Supply
100
-
-
Installation
100
-
-
3C x 2.5sqmm Cu cable
-
-
-
Supply
200
-
-
Installation
200
-
-
Providing end terminations for following sizes of 1.1 KV grade XLPE insulated and PVC sheathed armoured cables with required hard ware like heavy duty double compression weather proof glands, heavy duty long neck copper lugs, PVC gland cover etc complete
Makes: DOWELLS, JAINSON, CONNECTWELL, PHOENIX, ELMEX
-
-
-
3.5C x 95 sqmm
-
-
-
Supply
2
-
-
Installation
2
-
-
3C x 35 sqmm
-
-
-
Supply
4
-
-
Installation
4
-
-
4C x 4 sqmm
-
-
-
Supply
4
-
-
Installation
4
-
-
3C x 2.5sqmm
-
-
-
Supply
12
-
-
Installation
12
-
-
Supply and installation of 150mm dia NP2 class hume pipes for road crossing of cables as per IS
-
-
-
Supply
10
-
-
Installation
10
-
-
Cutting of Floor/ Road/ RCC/ PCC etc including removing the soling upto a depth of 600 mm and width 300 mm for laying cables, trays/ trunking, Hume/GI/HDPE pipes and back filling, resoling making good the road to the original finish and relaying with RCC M20 Concrete and shifting of excess earth to scrap area.
10
-
-
Supply and installation of maintenance free earthing stations with 250micron thickness copper bonded steel ground rod with around 20mm dia and 3 Mts long , Ground Enhancing Material (GEM), inter connecting earth tape between earthing stations and back fill material.Construction of masonary chamber of 450 x 450 mm with CI cover, earth station markers etc complete.
Pit should be as per IS 3043
Makes: ERICO, DEHN, JEF, OBO
6
-
-
Supply and fixing of 50 x 6 mm hot dip galvanised GI strip for earthing by clamping on walls/trays/trench with all required accesories
-
-
-
Supply
100
-
-
Installation
100
-
-
Supply and installation of following sizes of 2mm thickness GI perforated cable trays along with tray cover
-
-
-
300 mm width, 50mm height
-
-
-
Supply
50
-
-
Installation
50
-
-
Suply and installation of structural steel like channels,
angles etc for fabriaction and erection of cable trays supports, MCC panel support and painting of the same with red oxide and 2 coats of grey enamel paint. Rate should also include the required bolts and nuts for fixing of supports.
Make of Structural steel: TATA, Vizag Steel, Jindal Ispat, SAIL
50
-
-
Light Fittings and wiring
-
-
-
LED high efficient 4ft rail mounted type LED tube light fitting with separate LED tubes in CRCA housing, with output 2000 Lumens, Luminaire efficacy of around 120 lm/W, IP20, surge protection of minimum 4KV, driver efficiency 80%, power factor0.95, THD10%, CRI80, CCT-5700K, voltage range 120-270V AC, Ripple5%, Electrical insulation class-1.
-
-
-
Supply
30
-
-
Installation
30
-
-
Supply and installation of modular switch boards along with required face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered universal sockets. Makes: CRABTREE MURANO, NORTHWEST ARTISA, LEGRAND ARTEOR, SCHNEIDER ELECTRIC ZENCELO
-
-
-
8 modular switchboard with 5 Nos 6A Switches and 1 no of 16A switch with 1 no of of 6/16A socket
-
-
-
Supply
5
-
-
Installation
5
-
-
Supply and pulling of following sizes of flexible FRZH copper wires to be drawn in already concealed/surface mounted PVC conduit/channels with ferruling on both ends excluding cost of conduits, channels and switch boards.
Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, TORRENT POWER LIMITED, UNIVERSAL CABLES LIMITED
-
-
-
1.5 Sq.mm FRZH Copper wire
-
-
-
Supply
500
-
-
Installation
500
-
-
2.5 Sq.mm FRZH Copper wire
-
-
-
Supply
500
-
-
Installation
500
-
-
Supply and installation of 25 mm dia 1.8 mm thick PVC conduits and required junction boxes confirming to IS with accessories like bends, couplers etc in wall , false ceiling etc complete
Make: Sudhakar/AKG
-
-
-
Supply
100
-
-
Installation
100
-
-
Supply, installation, testing and commissioning of KSB make Pump Model WKB 80/2 or of equivalent make with Sole plate,
37 kw Motor, coupling, strainer at suction for
Flow 60m³/hr, head -100-meter, temp 45 deg
cent. Pump MOC as per data sheet.
2
-
-
Supply, installation and testing of hand operated chain pulley block of 3 mtr, 1 ton capacity. Specifications:
Steel shaft-ground (MN/m2) : 14
Mechanism class: M1
Average life (Total life hr. ): 40000
Warranty: 1 yr.
IS confirmity: IS 3832 latest
Material: as per clause 6 of IS-3268
Construction: as per clause 5 of IS- 3268
Plain bearing material: Bronze
Relevant load test certificates shall be submitted
1
-
-
Piping Works
-
-
-
Supplying, fabricating and erecting / fixing in position the piping either inside plant building / in yard, at all elevations from 0 to 7 metres height generally as indicated in the relevant drawings. Following specified materials shall be used. (1) Pipe:
(a) Carbon steel bevelled end seamless pipes conforming to ASTM A 106 Gr.B & dimensions conforming to ANSI B36.10 of make M/s MSL / M/s Jindal / M/s Tata; (b) Screwed ends Galvanized Iron pipes Conforming to IS 1239-1 Heavy Class with socket at one end makes M/s Tata/Jindal; (c) Stainless steel bevelled end seamless pipes conforming to ASTM A312 TP304 & dimensions conforming to ANSI B36.19; of make M/s Jindal / Remi / Inox / Nippon / Ratnamani
(2) Fittings & Flanges: Carbon Steel / SS fittings and flanges confirming to IS:6392 / ASTM A182 and dimensions conforming to ANSI B16.5 Class 150 with 3 mm thick neoprene gaskets of suitable grade, fastened using suitable carbon steel / SS bolts, nuts and washers, as directed by EIC.
(3) Welding & Clamping: Pipes to be welded using E-6010 / E-6011 / E-6012 / E-6013 / ER-308L electrodes of make M/s Ador / Advani / D&H / Phillips and to be supported with suitable clamps on mild steel structural frame work / tee supports. (4) Painting: Pipes to be painted with 2 coats synthetic enamel paint of make M/s Asian/ Berger over one coat of zinc chromate red oxide primer after proper surface preparation to the satisfaction of EIC. .
(5) Testing & Commissioning: Pipelines to be DP tested (10% min) and hydraulically tested segment wise at a pressure of 15 bar followed by flushing and commissioning including cost of all consumables, labour, etc., complete as directed by EIC. (6) Documents to be submitted:
(a) Original manufacturer's test certificates of the pipes supplied.
(b) Pipe sample(s) from each batch to be tested at MSME laboratory for its mechanical & chemical properties.
(c) ITI welder certificate / IBR welder certificate to be submitted for the engaged welders. The unit cost includes cost of all the consumables, labour and other equipments to complete the required quantity as directed by EIC.
-
-
-
100 mm NB Sch 40 (Carbon Steel)
175
-
-
80 mm NB Sch 40 (Carbon Steel)
15
-
-
Supplying and fixing of various valves as described in the following conforming to relevant standards along with matching companion flanges with suitable bolts nuts, washers, fixing of flanges to pipe, aligning, testing and painting complete as directed. Gate Valves (PN 16): Cast Carbon Steel (A-216GR. WCB) gate valve of Class-150 to API-600, Outside Screw, Yoke Type, Rising Stem with Back Seat Arrangement. Bolted Bonnet, 13% Cr. S.S. (AISI-410) Trim. Solid Wedge. Flanges as per ANSI-B 16.5 Class-150. Raised Face. Body Test Pressure 30 Bar Gauge seat & Back seat 22 Bar Gauge.Max. Make: M/s Audco/Leader/Zoloto/Hawa
-
-
-
100 NB
1
-
-
Supply, installation and testing of Non Return Valve 100 mm NB, BS: 1868/ API 6D, Class-150 CCS (ASTM A216 GR WCB, bolted cover. Renewable seat. Manufactured by M/s Kirlosker/Zoloto/Leader/Audco or any equivalent approved make.
2
-
-
Supply, installation, testing and commissioning of Digital flow meter for nominal diameter 100 mm, accuracy ± 0.5% to 1%, maximum pipeline pressure : 25 Bar, mimimum conductivity : 5 µS/cm, fluid temperature : -10° C to 80°C, flow range: 18-180 m³ /Hr. Power supply: 24V DC, 230 V AC.Conforming to relevant standards along with matching companion flanges with suitable nuts, bolts, washers, fixing of flanges to pipe, aligning, testing and painting as directed by EIC.
Approved make: E&H, Yokogawa, Emerson
Relevant calibration/ test certificates to be submitted.
1
-
-
SS Fire Hydrant valve(landing valve) of 63 NB of bearing and conforming to IS 5290, of SS 304, of Harihant Engrs, Priyanka Ind, Vimco, AAG make fixing valve to companion flange using 3mm thick AC gasket, bolts and nuts complete as specified and directed.
2
-
-
Extra over painting of pipe lines for providing Coating and wrapping of the pipe lines (including fittings) consisting of one coat each of coal tar primer and enamel, cold wrap of impregnated fibre glass, of suitable width, of PIPEKOTE or Rust free make, including thermofusioning of polyethylene layer of coat using thermo torch, seal coating, overlapping not less than 25mm, testing of coating by holiday testing conforming to IS 10221, cleaning pipes etc., complete and total thickness of coat not less than 4 mm, complete as specified and directed.
15
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements