Nuclear Fuel Complex Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Nuclear Fuel Complex - NFC Tender
Civil And Construction
Building Construction
Eprocure
Opening Date3 Aug 2024
Closing DateCancelled
Tender Amount₹ 4,89,00,000
Costs
EMD
₹ 9,78,000Document Cost
Refer DocumentsTender Fee
Refer Documents
Summary
Waterproofing And Other Allied Worksupper Area Of Nfc Hyderabad.
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
2024_NFC_819602_1Tender No
C/1352/2024Tender Authority
Nuclear Fuel Complex ViewPurchaser Address
-Website
http://eprocure.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
a) Upto 1.50 m depth from average ground level.
800
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
100
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in soft rocks over areas including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineerin- charge.
-
-
-
a) Upto 1.50 m depth from average ground level.
20
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
10
-
-
Earth work in excavation by mechanical means (Hydraulic excavator)/manual means in hard rock without blasting over areas including getting out and disposal of excavated earth lead upto 50 m and lift more than 1.5m upto 3 m, as directed by Engineerin- charge.
-
-
-
a) Upto 1.50 m depth from average ground level.
20
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
10
-
-
Excavation in TRENCHES for pipes, sewers, etc in all soils except soft and hard rock from average ground level including dewatering if necessary, dressing bottom to required level, profile/slope, back filling in trenches with selected excavated materials in layers not exceeding 250 mm, consolidating, leveling, clearing of all the areas involving excavation of all grass,rank vegetation, shrubs,bushes,cutting of trees upto 300mm grith measured at 1.0 mtr above ground level disposing the spoil within a distance of 50m for ,storm water drains, electrical cables trenches etc.,
-
-
-
a) Upto 1.50 m depth from average ground level for
100
-
-
b) Above 1.50 m to 3.00 m depth from average ground level.
10
-
-
Felling down carefully trees of girth (measured at a height of 1.0m above ground level) as mentioned below including necessary excavation, removal / destruction of roots, filling the excavated pockets thus formed with good earth, compacting the same, cutting the trunks and branches of trees into suitable pieces for transporting, transporting, stacking and disposing the same at the locations as directed by Engineer – in – Charge, etc., complete.
-
-
-
Beyond 30 cm girth upto and including 60 cm girth
400
-
-
Beyond 60 cm girth upto and including 120 cm girth
50
-
-
Beyond 120 cm girth upto and including 240 cm girth
30
-
-
Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared etc. complete as specified and directed.
2000
-
-
Chemical blasting using expansive mortar in rocks/PCC/RCC . Drilling vertical or inclined holes in rectangular pattern of required diameter at required spacing and depth. Filling the holes with approved non corrosive and non toxic expansive mortar. Removal of broken pieces of fragmented rocks and making the surface level upto depth of 3m from FFL.
5
-
-
Lead charges upto 2KM or part thereof for additional lead over the initial lead of 50 m by mechanical transport, including loading, unloading, stacking, the disposable soil, rock , other unserviceable materials etc., Note: Measurement of lead charges will be based on truck measurement with a deduction of voids @20% for soil and 50% for rock
-
-
-
a) for soil and fine materials
808
-
-
b) for rock, RR masoary , debris etc
100
-
-
Transportation of tree branches, trunks and roots, scrap by engaging tractor trolley including cost of fuel, wages of driver and required manpower for loading, transporting up to a lead of 2.0 KM, unloading and stacking in the placed shown by Engineer-in-Charge complete as directed.
20
-
-
Filling available excavated earth (excluding rock) in trenches , plinth , sides of foundation etc.., in layers not exceeding 20cm in depth , consolidating each deposited layer by ramming and watering , lead upto 50m and lift upto 1.5m.
100
-
-
Excavation in Cutting/Banking/Filling for site leveling or leveling over areas, around the buildings, in plinth, flooring, road formation, aprons, etc., to required levels by mechanical means in all kinds of Soils except Soft and Hard Rock, conveying the approved excavated earth within 200m lead, depositing in layers not exceeding 250mm in thickness, spreading, breaking clods, lumps, watering, dressing, levelling, compacting and consolidating each layer of the filled earth by watering and consolidating with 8 to 10 Ton roller, to proctor density of 95%, dressing the top and sides to correct levels, slopes/camber, grades, profiles, etc., including clearing of all the areas involving excavation and filling, of all grass, rank vegetation, shrubs, bushes, cutting of trees upto 300mm girth measured at 1.0m above ground level, etc., and disposing the spoils to places as directed, etc., complete all as directed. Note:
1. Proctor density test of consolidated soil shall be carried out and will be paid under separate item. 2. Spoil should be disposed of within 200 mts. 3. Quantity of cutting will be measured for payment
800
-
-
Providing pitching /pitched drain 150mm thick to the slopes of earth using approved local rubble stones, excavating/ forming the earth to required slopes, levels, gradient, etc., to form the base, laying th stones and filling the interstices with smaller stones and blinding with murrum, etc., all complete as directed.
1500
-
-
Flush pointing to the joints of rubble stone pitching etc., in CM 1:3 to a depth of 20 mm after raking out mud mortar/cement mortar joints, cleaning, pointing neatly and finishing the joints as specified, curing etc., complete all as directed.
1500
-
-
Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width
as well as 10 sqm on plan including getting out and disposal of excavated earth upto 50 m and
lift upto 1.5 m, as directed by Engineer-in- Charge:
-
-
-
All kinds of soil
300
-
-
Concrete Works
-
-
-
Plain Cement Concrete 1:3:6 using Portland Pozzolana Cement conforming to IS 1489 Part-1 (M/s. ACC, Ultra Tech, Ambuja, Birla make) with crushed stone sand and graded stone aggregates of 20mm maximum size at all depths/heights below/above plinth level including consolidation, finishing smooth/broom finish as applicable, curing, etc., but excluding Formwork, complete as specified and directed.
80
-
-
SHUTTERING
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level, vertical, horizontal, inclined including, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed for Foundation, pedestals, plinth beams, etc.,
-
-
-
Below and Upto Finish Floor Level
600
-
-
Providing centering and shuttering using steel shuttering plates at all depths and heights below and above plinth level, vertical, horizontal, inclined including strutting, propping using steel pipes/acro stagging, removal, cleaning of the same for insitu reinforced cement concrete and in plain cement concrete work as required including chamfers, splays, keys, wedges, nails, bracings, brackets and applying one coat of shuttering oil on all shuttering surfaces coming in contact with concrete etc., complete as directed for Foundation, pedestals, plinth beams, etc., Above Finish Floor Level
500
-
-
Extra for additional height in centering, shuttering where ever required with adequate bracing, propping etc., including cost of de-shuttering and decentering at all levels, over a height of 3.5 m, for every additional height of 1 metre or part thereof (Plan area to be measured). in Suspended floors, roofs, landings, beams and balconies
600
-
-
Reinforced Cement Concrete by insitu mixing by WEIGH BATCHING or RMC of Ultra Tech, Birla Ready Mix make of Grade M - 35 (Minimum Cement Content – 370Kg/Cum) using Portland Pozzolana Cement conforming to IS 1489 (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, Andhra Cements Ltd., KCP make) with graded stone aggregate of 20mm maximum size and sand at and at all depths and heights including mixing with superplasticizer of make M/s. Fosroc, Demech, Huntsman, Pidilite, Sunanda Chemicals, Agro Chemicals, MBT in proportion as per manufacturer’s Specifications, conveying / pumping / placing at all depths / heights below / above plinth level, consolidation, finishing as specified, curing, etc., including providing and placing cover blocks of required sizes in cement mortar 1:1, etc., but excluding Formwork and Steel Reinforcement complete as specified and directed. NOTE:-The concrete of RCC of any grade if it is insitu (site mix) the sand to be used shall be River sand. In case of RMC, the manufactured sand. The blended cement i.e., PPC shall not have more than 35% of pozzolanas.
-
-
-
a) Below FFL
120
-
-
b) Above FFL
120
-
-
Casting and fixing in position precast reinforced cement concrete covers of required size in RCC M-25 insitu mixing BY WEIGH BATCHER using Portland Slag Cement conforming to conforming to IS 455 Latest Edition (M/s. ACC, Ultra Tech,Chettinadu, Coramandal, KCP) , crushed sand , graded stone aggregate of 10 mm maximum size at and at all depths and heights below and above plinth level including mixing superplastizer (M/s. Fosroc, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT) in proportion as per manufacturer’s specifications including necessary shuttering, providing and fixing cover blocks of required sizes, consolidation finishing as specified, curing, making casting yard and curing tank, stacking carefully at casting yard and transporting to the site of use placing in position as shown in drawings, aligning, leveling, making good all the damaged surfaces etc., complete as directed for covers for storm water drains/trenches with and without holes. NOTE:- GGBS Pozzalanas should not be more than 50 % of weight of cement specified in the code and is of mixed at cement manufacture unit only
15
-
-
Supply, fabrication and erection of Reinforcement bars for Reinforced cement concrete items at and at all depths and heights below and above plinth level Thermo-Mechanically Treated bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag,Sail, JSW make, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and directed.
33.6
-
-
Supplying and Fixing in position IRC Fabric of 100X100X4 size conforming to IS 1566 of standard make or its approved equivalent as directed by Engineer-in-charge.
300
-
-
Providing and Placing in position suitable PVC water stops Serrated with central bulb (225 mm wide, 8-11 mm thick) conforming to IS:12200 for construction/ expansion joints between two RCC members and fixed to the reinforcement with binding wire before pouring concrete etc. complete :
50
-
-
Centering and shuttering including strutting, propping etc. and removal of form for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick
400
-
-
Supply and grouting, column base, anchor holes, holes, pocket foundation tops etc, mixing placing curing etc with non shrink, free flow, general purpose GP2 grout of approved make (Fosroc, SIKA, pidilite, STP, BASF, ESSAR, ACC) as per manufacturers specification.
4500
-
-
Extra over Item-5 for providing and mixing 10mm/6 mm aggregate chips before placement of grout mix.
2250
-
-
Granular Sub base with Coarse Graded Material (Construction of granular sub-base by providing close graded Material conforming to specifications mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge)- With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30
150
-
-
Steel Works
-
-
-
Supply, Fabrication and Erection of Structural Steel work using Rolled Steel Joists, Beams, Channels, Plates, etc., at all levels above and below plinth level including supplying of steel sections and plates conforming to BIS 2062 of make Vizag Steel, Tata, SAIL, Jindal Ispat or any other approved manufacturer using ingots of above manufacturer make, loading, unloading, transporting the steel to site of work, cutting, fabricating using welding/bolts, using weld rods of make D&H, Advani, Philips or its approved equivalent and/or bolts and nuts from approved source, erecting using derricks/pulleys/cranes or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of Synthetic Enamel paint as per manufacturers Specifications of make Asian Paint, Berger, Johnson and Nickelson, Nerolac, cleaning the sections /plates by suitable means, etc., complete as directed by the Engineer-in-Charge.
-
-
-
a) For Rolled steel sections
12
-
-
b) For plain plates/chequered plates.
2
-
-
Supplying, fabrication and erection of hollow structural steel section by using MS tube of approved make at all levels above plinth level as per design including bolting/welding using weld rods of make D&H, Advani, Philips, complete as directed by Engineer-in-charge.
3
-
-
Painting steel surfaces with one coat of zinc chromate primer and two coats of synthetic enamel paint Asian, Pidilite, Johnson & Nicklson, Nerolac, berger, of approved shade including preparing surfaces, cleaning, sand papering, including applying and filling crevices or wherever required suitable filler etc, scaffolding, cleaning, etc., complete.
400
-
-
Steel Painting
PU PAINT OVER EPOXY PRIMER :-Applying two coats of two component, high build, self priming, rust encapsulating, modified epoxy coating of DFT 100 microns for each coat using “Rust-O-cap” metacare coating of Asian paints/ Dekgaurd EP 302 of fosroc, over which one finishing coat of aliphatic polyurethane coating of DFT 30 microns using APCOTHANE CF 675 of Asian paints or Dekgaurd PU of Fosroc to existing steel / concrete structures at all elevations in various locations including required surface preparation and substrate condition as per the manufacturer’s recommendations
200
-
-
Supplying, fabricating, erecting and fixing in position, foundation bolts using MS rounds of make M/s Tata, Vizag Steel, Jindal or approved equivalent conforming to IS 432 and suitable nuts and plain washers including threading, placing in position in concrete in level using template, providing grease and protective cover like covering with polyethelene sheet to bolts and nuts to correct levels ,etc complete and as directed by EIC.
0.5
-
-
Providing and fixing in position Anchor Shells/Expansion shells of approved make of HILTI/FISCHER or any other approved of best quality of 16mm dia for anchoring supporting structural steel columns with necessary MS bolts of required size/length including drilling holes in RCC flooring, aligning bolts to position, proper level, Bolts,Washers Labour, etc., complete as directed.
200
-
-
Supplying , Fabrication and erection of Rain water gutters made to required shape using 6mm thick or as directed by Engineer-in-Charge MS plate conforming to IS 2062 of makes SAIL, Vizag Steel , Jindal or from any manufacturer's source making plate using ingots of above , including required bending and strightenning of sheet at all heights, cutting , welding (using welding rods of D & H , ADVANI , PHILIPS ) and other minor supporting structural members for Rain, Water Gutter etc. including painting with one coat of approved red oxide Zinc chromate primer and two coats of synthetic paint for steel surfaces, cleaning by approved means completed as specified and directed by Engineer-in-Charge.
0.8
-
-
Providing and fixing MS wicketgate/ MS tubular gates single/ double leaves/wiket of required size along with or without wicket gate , comprising structural steel tubes/flats/ frame including providing necesary heavy duty ball bearing hinges,lugs,latches, locking arrangement, pipe inserts and other necessary fittings and fixtures required for smooth operation of gates as per design provided and as directed by Engineer in charge.
300
-
-
Supplying and fixing in position approved manual operated steel rolling shutters made from M.S. lathes of not less than 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft not less than 6", ceiling strips providing approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
12
-
-
Supplying and fixing in position approved MOTOR OPERATED (push & pull) steel rolling shutters made from M.S. lathes of 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft with tested springs, ceiling strips providing 4 nos. of approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing 1.0 HP motor of Crompton Greaves, L&T or any approved equivalent along with other accessories for on and Off, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
20
-
-
Structural steel work riveted, bolted or welded in built up sections, trusses, M.S tubes and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete
100
-
-
Providing and fixing CI gratings conforming to IS 1729 for rain water pipe entry mouths/filter bed, etc., including chasing making holes in existing masonry concrete surfaces, refilling with cement concrete 1:2:4 reinstating to the original conditions, painting with two coats of bitumastic paint, all in level and line complete as directed and specified for rain water mouths, filter bed.
50
-
-
GI pipe hand rail made out of 32 mm /25 mm nominal bore GI pipes (Jindal, Tata or equivalent) of medium quality conforming to IS 1239, 32 mm n.b. as top fabricated horizontal and vertical members and 25 mm nominal bore as middle and /bottom horizontal members at and at all heights above plinth level, cut to size and shape including necessary bends, tees or with welding as required and fixed in position by grouting or by welding to insert plates provided etc., complete, painting with a coat of approved primer comparable to receive polyurethane paint, etc., complete as specified and directed. for type B
3500
-
-
Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-incharge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).
200
-
-
Providing and fixing G.I. chain link fabric fencing, made of G.I. wire of dia 4 mm encaptulated with PVC ( final dia not less than 5mm) of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.
800
-
-
Providing and fixing pressed steel door frames and shutters, of profile-B to E conforming to IS:4351, with frame GI 1.20mm, shutter: GI 0.80 mm and width of 818 mm. Frame profile-100X57 mm including ball bearing butt hinge (SS 304 Grade), of size 100X75X3 mm with screws, Mortise sash lock ( H9-GU-BKS 2160,65 BS/72/9mm), Euro profile 5 pin Cylinder 5702, 70 mm Key, lever handle LT 001, 19 dia with roses & escutheion ( SS 304) including painting as and a opening of 300X300 with required glass on door for vision if required and as directed by Engineer- in-charge
12
-
-
Providing and fixing in position Anchor Shells/Expansion shells of approved make of HILTI/FISCHER or any other approved of best quality of 12mm X 95mm for anchoring supporting various steel elements with necessary MS bolts of required size/length including drilling holes in PCC/RCC members, aligning bolts to position, proper level, Bolts,Washers Labour, etc., complete as directed.
720
-
-
Masonary Works
-
-
-
Brick work using flyash bricks of class designation 7.5 conforming to IS12894 using cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116 ) at all depths and heights below and above plinth level including pilasters, steel / tubular scaffolding, raking out joints, curing etc., complete as per specifications and as directed in super structure.
30
-
-
Half brick masonry using fly ash cement bricks as of 7.5 grade in partition walls in cement mortar 1:4 using crushed sand of grade conforming to BIS 2116 at all depths and heights below and above plinth level including scaffolding, raking out joints, curing, etc., complete including providing stiffeners of reinforced cement concrete 1:2:4, 115 mm x 75 mm size at every 900 mm height, necessary formwork, curing, etc., complete as per specifications and as directed but excluding reinforcement.
100
-
-
Providing and laying Autoclaved Aerated concrete(AAC) blocks masonry 100 mm/ 125 mm
thick with Grade-1 AAC blocks of density 551 to 650 kg/cum conforming to IS:2185 (Part 3) in
super structure above plinth level up to floor V level in cement mortar 1:4 (1 cement : 4 coarse
sand). The rate includes providing and placing in position 2 Nos 6 mm dia M.S. bars at every
third course of masonry work.
20
-
-
Cement plastering 15 mm thick for internal walls in cement mortar 1:4 finished smooth and at all heights above plinth level over brick walls or concrete surfaces including making necessary grooves in between junctions of brick masonry and RCC and also other places wherever required over brick walls or concrete surface, preparation of surface, structural grooves if necessary, steel/tubular scaffolding, curing, etc., complete as directed.
500
-
-
Cement plastering 6 mm thick for ceiling with cement mortar 1:3 (1 cement :3 river sand) finished smooth finish with including hacking of concrete surfaces, preparation of surface, steel/tubular scaffolding, curing, etc., complete as directed.
100
-
-
Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls/ ceilings complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineerin- Charge.
With cement mortar 1:4 (1 cement : 4 fine sand)
300
-
-
Cement plastering 20 mm thick in 2 coats over masonary and concrete surfaces upto a height of 10 mtr with base coat of 12 mm thickness in cement mortar 1:4 and finishing coat of 8mm thickness in cement mortar 1:3 (smooth finish), final rendering,double scaffolding wherever necessary ,hacking of concrete surfaces, etc complete.
400
-
-
Chicken Mesh Providing and fixing plaster mesh/chicken mesh manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm size 25mm x 25mm with a zinc coating of 120gms per sqm along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications.
50
-
-
Random rubble stone masonry using approved local stones in foundations/pedestals etc and plinth at and at all depths below/above finished floor level in cement mortar 1:6 (1 cement :6 using crushed stone sand of grade conforming to BIS 2116) including simultaneous flush pointing with the same mortar, bond stones, curing, etc., using crushed stone sand of grade conforming to BIS 2116, complete as specified and directed.
20
-
-
Polymer Modified Plaster
Providing and applying avg 15 mm to 20 mm thick plastering on the walls, beams and columns etc using polymer modified plaster with CM 1:4 admixed with Pidilite Industries Limited's make- Dr. Fixit Pidicrete URP /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make@ 2 kg per bag of cement
250
-
-
Roof Sheeting Works
-
-
-
Supplying and fixing Fibre Reinforcd Cement Corrugated sheets, 6mm thick of Charminar/ Visakha/ everest make conforming to IS 459 and laying as per IS 3007 at various elevations using necessary safety nets. Roof walk ladders and other standard safety devices including all overlaps, mitring, Supplying and fixing necessary 8mm dia self tapping self drilling self fastening powder coated screws of suitable length not less than 65mm, with EPDM washers as per manufactures code of Practice and cutting the sheets as required etc., complete all as directed by Engineer-in-Charge.
1200
-
-
Extra for using anticorrosive polymer coated J bolts of dia 8mm of large sizes (upto 1.2 m)instead of powder coated screws to fit RCC purlins of sizes upto 300 X 500mm for roof sheeting works
1320
-
-
Providing and fixing in position approved quality weather tight accessories such as ridge place (PAIR), in required shape and profile made of fibre reinforced cement including neessary cutting, profiling, sealants, flat iron buckets, EPDM/beadings, powder coated self tapping screws etc all complete in accordance with approved manufacture's standard practice using all appropriate safety devises as directed by Engineer-in-
Charge.
200
-
-
Transportation of damaged ACsheets, gutters, ridges and debris etc., generated from above items by engaging tractor trolley including cost of fuel, wages of driver and required manpower for loading, transporting upto a lead of 2.0KM,, unloading and stacking, material in the place shown by engineer-in-charge etc., complete as directed.( Note : The size of tractor trolly shall not be less than 3.0mX1.9mX0.45m) payment shall be made for each trip.
40
-
-
Cutting of fibre reinforced cement corrugated sheets, 6 mm thick as per site requirement at various elevations using necessary safety precautions and disposal of debris within 50m. (Note: Straight length of sheet shall be considered for measurement)
50
-
-
Providing and fixing 24 inch SS304 wind driven turbo ventilators at all elevations of size (410mm X 735mm -/+75mm ) with 38 to 42 no of vanes of 0.5mm thick rolled formed ss steel having double permanently lubricated and sealed bearing of heavy quality, to be mounted on UV treated FRP/Polycarbonate Base plate (more than 60 % light transmission fixing with fiber reinforced cement/galvalume corrugated roof sheeting with suitable SS self tapping screw/ galvanised J bolts, making it leak proof with FRP Coating if required, complete as specified and directed.
20
-
-
Providing and Fixing Trapezoidal profiled color coated Galvalume Sheets for roofings, claddings, rain water pipes etc.at all elevations using sheets in 0.5mm TCT (Total Coated Thickness) and strength not less than 350 N/Sqmm including flashings, corners, ridges, eaves boards, etc., of approved make including scaffolding, fixing the sheets with Stainless Steel self tapping, self drilling and self fastening screws, and EPDM Washers, etc., all complete as directed.
300
-
-
Providing polycarbonate Sheeting of 2 mm thick, at all elevations pressed to matching trough corrugations of roofing of GE make, Everest, Tufflite or any other approved equivalent make for sky lights including sealing around sheets with GE Siliconates or any other sealants, treating for rain proof, fixing sheeting with SS self tapping screws etc., complete as directed.
100
-
-
Wood/ Aluminium/ Architectural works
-
-
-
Supplying and fixing in position at all floors integrated bronze anodised matt finished [15 micron thick], aluminium section [extruded] for aluminium Doors / windows (sliding/movable) /mesh windows /ventilators/ top hung/ fixed / grill/ adjustable louvered/ windows/ fixed partitions as per drawing of approved manufactures with extruded sections of Jindal / Indal / Aluminax make using sections with size and weights as shown in the drawing, for frames and shutters [including wastages if any] conforming to relevant I.S specifications with all approved Bronze anodised aluminium fittings and accessories, locking arrangements, 2 / 3 rollers with ball bearings for sliding shutters of approved quality all as shown in the drawing, including providing and fixing aluminium channel beading / glazing clips fixed with necessary bronze anodised screws, grouting the gap with filler of thermocole beading /polymer variety & GE sealant etc. all complete generally as per drawings, specifications etc., all as directed by Engineer in charge. but excluding the cost of glazing, which will be paid separately. NOTE: Approval of the Dept. for the complete design and shop drawing shall be obtained before commencement of the work.
3600
-
-
Providing and fixing glazing with 5 mm thick plain float glass of approved quality (Atul, Modiguard, Triveni, Hindustan Pilkington) including PVC/EPDM lining as per the drawing and as directed for window shutters and ventilators.
300
-
-
Pre-laminated particle board with decorative lamination on both sides, Grade I, Type II, IS:12823 marked of thickness upto 12 mm.
300
-
-
Removing carefully the damaged PVC flooring including cleaning the adhesive from the floors and disposing the debris and stacking at places within 100m lead as directed by the Engineer-in-charge
300
-
-
Providing and fixing false ceiling at all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity 0.043 W/m K as per ASTM 518:1991, in true horizontal level suspended on inter-locking metal powder coated T-Grid of hot dipped galvanised iron section of 0.40 mm thick on Silhouette profile,rotary stiched double webbed white with 6mm reveal profile (white/ black), comprising of main-T runners of size 15x42mm of length 3000 mm, cross - T of size 15x42 mm of length 1200 mm and secondary intermediate cross-T of size 15x42 mm of length 600mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 80 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L-shape level adjuster of size 85x25x2 mm. Galvanised iron perimeter wall angle of size 22x19x0.40 mm of length 3000 mm to be fixed on periphery wall / partition with the help of plastic rawl plugs at 450 mm center to center and 40mm long dry wall S.S screws. The work shall be carried out
as per specifications, drawing and as per directions of the Engineer-in-Charge. With 15 mm thick integral densified micro edge light weight calcium silicate false ceiling tiles
450
-
-
Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10
mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately.
-
-
-
Two and half track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (65mm & above) x (40mm & above) & glazed sash (25mm & above) x (50mm & above) & fly screen sash (18mm & above) x (40mm & above) with zinc alloy (zamak) powder coated touch locks with hook (Height upto 1.2 metre).
250
-
-
Providing and fixing factory made uPVC white colour fixed glazed windows/ventilators comprising of uPVC multi-chambered frame and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), , uPVC extruded glazing beads of appropriate dimension, EPDM gasket, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single / double glass panes and silicon sealant shall be paid separately). Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made. Note: For uPVC frame, sash and mullion extruded profiles minus 5% tolerance in dimension i.e. in depth & width of profile shall be acceptable.
-
-
-
Fixed window / ventilator made of (small series) frame 47 x 50 mm & mullion 47 x 68 mm both having wall thickness of 1.9 ± 0.2 mm and single glazing bead of appropriate dimension.
50
-
-
Removing existing wooden/steel /aluminium/UPVC doors, windows, ventilators etc., including shutters, frames architraves, holdfasts etc., very carefully without damaging the frame shutters glass, etc., and transporintg the dismantled doors, windows, ventilators immediately to the departmnetal stores within NFC premises cleaning, disposing of unserviceable materials within a lead of 50 mts complete as directed
-
-
-
Area 3 sq. metres and below
300
-
-
Area beyond 3 sq. metres
150
-
-
Providing and fixing factory made single extruded WPC ( Wood polymer Composite ) solid door/window/ceosetory windows & other FRAMES / CHOWKHAT comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) fabricated with miter joints after applying PVC solvent cement screwed with full body threaded star headed SS screws having minimum frame density of 750kg/cum , screw withdrawal strength of 2200N (Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent and fixed in position with M.S hold fast / lugs / SS dash fastners of required dia and length complete as per direction of Engineer in Charge. ( M.S hold fast / lugs or SS dash fastners shall be paid for separately). Note : For WPC solid door/window frames , minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made.
-
-
-
Frame Size 65 x 100 mm
30
-
-
Providing and fixing factory made single extruded wpc ( Wood polymer Composite ) solid decorative type flush door shutter of required size comprising of virgin PVC polymer of K value 58-60 ( Suspension Grade ), calcium carbonate and natural fibers ( wood powder / rice husk / wheat husk ) and non toxic additives ( maximum toxicity index of 12 for 100 gms ) having minimum frame density of 650kg/cum , screw withdrawal strength of 1800N (Face ) & 900 N ( Edge ) , Minimum compressive strength of 2200 N ( Face ) & 1100 N ( Edge ) , Modulus of Elasticity 900 N/mm2 and resistance to spread of flame of Class A Category with property of being termite/borer proof, water / moisture proof and fire retardent. WPC is to be laminated with pvc foil of minimum 14 microns , thick of approved design pasted with hot melt adhesive on both faces of shutter and fixing with stainless steel butt hinges of required size with neccessary full body threaded star headed counter sunk S.S Screws, all as per direction of engineer in Charge. ( Note : stainless steel butt hinges and necessary S.S screws shall be paid separately).
-
-
-
35 mm Thick
12
-
-
Supplying and fixing at and at all heights above plinth level hydraulic door closers of ‘EVERITE’/Godrej make or approved equivalent suitable for doors weighing upto 80kg confirming to IS 3564 with all fixtures, fittings and approved screws of appropriate size etc., complete as directed.
25
-
-
Supplying only approved anodized extruded aluminium heavy quality butt hinges generally conforming to IS specifications CLASSIC, JYOTHI make or approved equivalent make) of size100X75X4mm with cadmium plated wood screws of appropriate size etc., complete as directed for doors etc.
75
-
-
Supplying and fixing to doors at and at all heights above plinth level approved best quality anodized extruded aluminium hanging floor door stopper (twin rubber stopper) with rubber cushion (anodic coating not less than grade AC 10 as per IS 1868))transparent or dyed to required colour and shade, with necessary screws etc., complete for twin rubber stopper for all doors except toilet doors of quarters.
25
-
-
Supplying and fixing to wooden doors /steel doors/aluminium partitions at and at all heights above plinth level approved 6 lever cylindrical mortice locks of Godrej /Everite make or approved equivalent make comprising brass body and all parts including sticking plates made of brass, stainless steel keys in duplicate, a pair of mortice lock handles of approved pattern of Godrej make or its approved equivalent make with approved cadmium plated brass screws of appropriate size etc., complete as directed to suit single/double shutters for all doors of guest house including toilets and all doors of quarters except toiliet & utility doors of quarters
50
-
-
Supplying and fixing to wooden doors/steel doors/aluminium partitions etc. and at all heights above plinth level approved anodized extruded aluminium tower bolts conforming to relevant IS specifications (‘Classic’ or its approved equivalent) with approved cadmium plated brass screws of appropriate size etc., complete as directed.
-
-
-
a) using 250 mm long
50
-
-
Supplying and fixing to wooden doors /steel doors/aluminium partitions at all heights above plinth level approved anodized extruded aluminium handles with round grip and face plate conforming to relevant IS specifications and with ISI marking ‘Classic’/JYOTHI or approved equivalent and of size 125 mm (grip) with approved cadmium plated screws of appropriate size etc., complete as directed.
100
-
-
Supply and installation of vertical blinds with following specifications as per size of various windows.
Fabric: 100% polyster, glaxzd acrylic coating fabric having weight more than 400 gm/sqm and thickness more than 0.8mm and width 100 mm in approved shade and design. Fire retardant, blackout series, Zero light transmittance.
Head rail WCP: made of 25 mm high and 47 mm wide extruded high strength aluinium alloy section with average wall thickness of min 0.9mm. Aluminium section to be anodized.
End Control Unit (reduction gear box): reduction gear box reduction box of ratio 3.5:1 for smooth operation of blind by consisting of a planetary gear in the outer housing, four small transmission gears fitted in the middle assembly and an end receiving gear attached to central sprocket unit. Tilt Rod: Made of extruded aluminum having three keyways. The tilt rod is fixed in the end control unit and drives the carrier gear mechanism to rotate the louvers. The average diameter is 5.8mm to achieve minimum torsional deflection.
Tilter Chain: Made of 4.5 mm plastic beads molded on 2.0 mm thick polyester cord with 6mm pitch of the beads. The chain drives the sprocket fixed in the end control unit to rotate the louvers by 180 degrees. The pitch of the chain corresponds to the sprocket in perfect match for trouble free operation. Runners: Made of a molded component having anti friction additive. It consists of polymer housing with wheels mounted on sides and has a gear and worm mechanism with vertical worm fixed with a tongued poly carbonate stem to hold the louvers. The worm and gear mechanism are driven by tilt rod fixed to end control unit to rotate louvers by 180 degrees, The mounted wheels on sides of casing move on rails of head rail section for resistance free stacking of louvers. Spacer: Made of molded High Polymer DERL1N, having anti friction additive. It maintains proper spacing of the runners and ensures overlapping of louvers for perfect light control with size of 100mm or depending on the louver width.
500
-
-
Installation Bracket: Made of galvanized steel "L" bracket of thickness 3mm which to be fitted with pressure clip made of spring steel to hold the head- rail.
Cord Weight: Made of ABS material 110mm long hollow casing with a steel weight inside.
Cord: Made of 2.2mm in diameter, Nylon braided high strength cord having maximum abrasion resistance and minimum elongation. Bottom Mechanism (Weight and Chain): Made as per standard norm of manufacturer to keep the louver straight 86 prevent them from swaying.
(i) The bottom weight is powder coated galvanized steel strip of 1.8mm thickness.
(ii) Bottom weight is fixed with U-Type of Clips attached at end distance on cord having 0.8mm dia with molded plastic beads on it. (All specifications given are subject to standard tolerance.)
-
-
-
Supply and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire mesh with 1.4mm wide aperture, fixing the mesh in door/windows/aluminium frame, complete as directed by Engineer-in-charge.
300
-
-
Providing/fixing flexible PVC flooring and skirting using 2 mm thick PVC rolls conforming to IS 3462, manufactured by M/s.Premier / Armstrong / Royal House of approved shade, pattern design, repairing and leveling the patches of existing flooring with any approved filler including fixing the new rolls to flooring with approved synthetic adhesive as per manufacturer's specifications including cutting the rolls to required shape and size rolling with 20 Kg. roller, providing V groove and welding all joints using vinyl electrodes confirming to IS 8004, smoothening and cutting the welded beads, rolling over joints if required in line and level after finishing etc., complete all as per specifications and as directed by Engineer-in-Charge.
400
-
-
Providing and fixing roller blinds of approved make as per the manufacturer's specifications with drive unit, end plug, support brackets, roller tube, bottom rail, ball chains. Drive unit to be of moulded plastic with straight rectangular support pin and inserted into the tube end. It shall be driven by a ball chain pulley and can be positioned at right or left side of the shade. The shade when lowering or raising shall automatically be lockable upon release of the ball chain by the means of friction lock. End plug shall be moulded by plastic locking pin. The plug shall be inserted into the tube end. Support brackets shall be of zinc plated steel and provided with moulded plastic cover and used in right and left hand position differentiated by the acceptance of the rectamgular drive unit support or the round idler plugin Roller tube shall be made out of roll formed steel with outer diameter 25mm. It should be suitably protected against corrosion, keyway integral with the tube to accomodate the spline.
230
-
-
Providing and fixing at all heights sun control film of reflective type to the glass panes of windows. Manufactured by M/s. Gareware or its approved equivalent of required shade including cutting to required size, fixing the film without any wrinkles, removing any existing film, cleaning the glass along with paints if any thoroughly on both sides complete as per manufacturers’ specifications and as directed by the Engineer-in-Charge.
300
-
-
Waterproofing and repair works
-
-
-
Extra for adding "EPCO KP-200" of Krishna Conchem Products Pvt. Ltd. or its approved equivalent corrosion inhibiting admixture to the concrete at the rate 2 kgs per cubic meter of concrete or as specified by the manufacturer This admixture is to be added into wet concrete during mixing operation as per the manufacturer’s specifications and as directed.
100
-
-
Cleaning Re-bars & Steel Surfaces
Cleaning of reinforcement from rust from the reinforcing bars to give it a total rust free steel surface by using alkaline chemical rust remover of Pidilite Industries Limited's Dr. Fixit Rust Remover /equivalent material of Fosroc/ SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make with paint brush and removing loose particles after 24 hours of its application with wire brush and thoroughly washing with water and allowing it to dry, all complete as per direction of Engineer-In-Charge.
100
-
-
Anti-corrosive Primer for Reinforcement.
Providing and applying Pidilite Industries Limited's make- Dr. Fixit Zinc Rich Primer /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make which confirms to BS 4652 1995 Specification for Metallic Zinc Rich Priming paint Type 2 and mixing mechanically until it is homogenous and applying the same as one rich coat on reinforcement complete with all lift etc. complete. (If corrosion found on rebars)
100
-
-
Epoxy Bonding Agent
Providing and applying a coat of two-part solvent free epoxy resin based bonding agent Pidilite Industries Limited's make- Dr. Fixit Epoxy Bonding Agent /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make shall be having Shear Bond strength as per ASTM C : 881 - Concrete failure, on the surface at rate of 2 Sqm/kg.
250
-
-
Providing water proofing treatment to the roof/gutter or any other required surface with cold applied, Acrylic Elastomeric liquid membrane coating over one coat of crystallization coating system Pidilite /Fosroc in the following sequence:
a) Cleaning the surfaces from dirt, dust and other contaminations.
b) Identifying the areas of leakage by approved means.
c) Pressure grouting the area of leakage with cement slurry admixed with expansive grouting additive Conbex 100 of M/s
Armstrong or its approved equivalent at a minimum one grout point per 2 Sqm slab area.
d) Exposing, cleaning and filling cracks observed in RCC slab/any concrete surface with polymer modified mortar compound/PU sealant.
e) Cutting 'V' grooves along concrete and masonry junctions and filling the same with single part Polyurethane sealant,.
f) Pre wetting the surface of slab and application of one coat ofcrystallization coating system Xypex / Roofex@ 0.25 lt. /Sqm.
g) Applying two coats of high soild, cold applied, Acrylic Elastomeric liquid membrane coating as primer coat at 1:1 dilution@ 250 ml/sqm/coat and 1st coat at 20% dilution @450ml/sqm/coat.
h) Laying Fiber mesh on the surface.
i) Over the Fiber mesh, Application of two coats of high solid,cold applied, Acrylic Elastomeric liquid membrane coating at 20% dilution @ 450 ml/sq.m/coat, all as per approved manufacturer’s specifications and as directed by Engineer in Charge.
1000
-
-
Providing cement based waterproofing treatment to the sunken floor of water closets, bath rooms, nahanis from inside at all heights above plinth level/ lift area giving injections to the concrete surface as required with cement and approved waterproofing compound solution to fill up all inherent holes, voids, honey-combs, etc., in the concrete, applying waterproof plaster of about 25 mm thick for the floor area of the depression and about 18 mm on the side walls of the depression and continue the vertical treatment if necessary on the walls above proposed floor finish with making surface suitable and even to receive tiles, testing the treatment for water tightness by impounding water for 7 days etc., complete.
30
-
-
Micro Concrete
Providing and applying of Pidilite Industries Limited's make- Dr. Fixit Micro Concrete /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make, the micro concrete shall be mixed with 6 mm and downsized aggregates shall be added maximum 5 to 15% by the weight of dry micro concrete inside the shuttering. The same should be Cured for 14 days using water complete etc.
5000
-
-
Providing New Rebars
Removing the existing deteriorated reinforcement and supply and placing of new rebars of suitable diameter including cutting, bending and straightening and placing in position complete in all levels and if necessary, welding the new bars with the existing Rods by over lapping or drilling holes on the sound surface and fixing rebars using suitable epoxy acrylate based anchoring material. with all lead and lift etc. complete (If the rebar is corroded more than 25% of its original size)
Note :-
Additional rebars of suitable diamete shall be provided with the help of shear connectors. The shear connectors are provided in the repair area in a grid pattern of 200mm x 200mm by drilling holes of 12mm diameter to a depth of 150mm. The drilled holes shall be grouted with epoxy acrylate based anchoring material of BASF/ Sika/ Pidilite/ Fosroc/ Sunanda/ Krishna or any other approved equivalent make.
500
-
-
Injection Grouting using Cementitious Admixed with SBR - Styrene Bitadiene Styrene
Providing and Fixing 18 mm dia GI nozzles (the nozzle shall be embedded about half the depth of the member to be grouted) in grid pattern at a spacing not more than 1m c/c while casting the retaining wall and along construction joints at a spacing not more than 1m c/c . Nozzles can also be post fixed by drilling holes using drill machine and to be fixed with cement putty admixed with quick setting integral Waterproofing compound of polymer modified mortar using Pidilite Industries Limited's make- Dr. Fixit Pidicrete URP /equivalent material of Fosroc /SIKA/BASF/ Sunanda/ Krishna or any other approved equivalent make in the ratio of 1:1 by weight .The Caps shall be fixed in the mouth of the nozzles to avoid chocking of cement slurry etc, while concreting or Post fixing the Nozzle.
200
-
-
Injection Grouting : PU Foam Providing Polyurethane injection grout, Dr.Fixit PU Foam Injection /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make; 2 component injection resin system which is hydrophobic in nature & foams up to 30 times its volume on contact with water. The said system is inert, hence safe for potable water contact & non-bio degradable in nature. The application may be carried out in a staggered manner or in a grid pattern, 1 metre centre to centre, as desired by the Engineer in-charge Storing,mixing& application to be done strictly in accordance with the manufactures instructions to the floor and vertical walls. Applicator to ensure complete surface preparation of concrete substrate prior to grouting. The Packers shall be fixed using Dr. Fixit Polymer Mortar HB /equivalent material of Fosroc /SIKA/BASF or any other approved equivalent make or, Any Suitable Mortar/Adhesive
60
-
-
Injection Grouting: PU Resin
Providing Polyurethane injection grout, Dr. Fixit PU Plain Injection of M/s.Pidilite Industries Ltd /equivalent material of Fosroc /SIKA/BASF or any other approved equivalent make; 2 component injection resin system which is water insensitive & sets effectively in presence of water. The said system is inert,hence safe for potable water contact & non-bio degradable in nature. The applicaton may be carried out in a staggered manner or in a grid pattern, 1 metre centre to centre, as desired by the Engineer in -charge . Storing,mixing & application to be done strictly in accordance with the manufacture instructions. Applicator to ensure complete surface preparation of concrete substrate prior to grouting.
60
-
-
Injection Grouting using Moisture Insensitive Epoxy Grout
For strengthening the various members of the Concrete Segments, GI Nozzles shall be made in weak areas or at intervals of 1 metre centre to centre, and the same shall be injection grouted with Moisture Insensitive Epoxy Grout of Pidilite Industries Limited's make- Dr. Fixit Epoxy Injection Grout /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make. After the grouting is complete the nozzles shall be cut and the area shall be sealed with suitable sealant
200
-
-
Curing Compound
Providing and applying Pidilite Industries Limited's make-Dr. Fixit /equivalent material of Fosroc /SIKA/BASF or any other approved equivalent make Curing Compound on all horizontal surfaces by brush or spray by maintaining the spreading rate of 4 Sqm/lit in two coats. The second coat application shall be in direction perpendicular to the previous coat. The application shall begin immediately as the surface water dries and not after the surface water dries completely. For vertical surfaces for the in-situ concrete, application shall begin immediately after the shuttering is removed. The surface shall be kept wet till the Curing Compound is applied uniformly maintaining the spreading rate as specified.
250
-
-
Cutting core of 100 mm diamater in RC slabs/walls of with core cutting machine to provide sharp edges, safely without damaging the existing structure and to be filled with non shrink, free flow, general purpose GP2 grout of approved make (Fosroc, SIKA, pidilite, STP, BASF, ESSAR, ACC) and 6 mm downgrade stone aggregate including the cost of shuttering and finishing the surface. Note: Thickness of RCC slab/wall will be measured for payment.
2
-
-
Damp guard
Providing and applying two coats of Dr. Fixit Dampguard Classic a two-component coating composed of epoxy resin, curing agent, inert pigments & properly selected fine fillers, additives in water as a medium /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make . Time gap between two coats should be around 6-8 hours.
400
-
-
Internal And External Crack Treatment
Treatment for cracks by chasing open it using electrical cutter machine to form a “V” space groove of approx. 15 mm wide and 15 mm deep. The groove shall be cleaned with compressed air and thereafter sealed with polymer modified mortar of CM 1:4 which shall be admixed with Pidilite Industries Limited's make- Dr. Fixit Pidicrete URP/equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make @ 2kg per bag of cement. All complete as per the engineer incharge.
300
-
-
Repair Mortar for Refurbishment of Damaged concrete
Providing a High Strength and High Build Dual Shrinkage Compensated Repair Mortar of Dr. Fixit Polymer Mortar HB /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make .
500
-
-
External Wall Coating
Providing and applying a primer coat of Pidilite Industries Limited's make- Dr. Fixit Primeseal /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make, dilute with water in the ratio 2:1 and apply @ the rate of 8-10 Sqm/liter depending upon the porosity of the substrate.
Providing and applying two coats of Pidilite Industries Limited's make- Dr. Fixit Raincoat /equivalent material of Fosroc /SIKA/BASF or any other approved equivalent make (Tinted to Colour of Customer's Choice) over the primed surface without any dilution. The effective coverage of Raincoat shall be 3-3.5 Sqm / liter for two coats to achieve a DFT of 100 microns. All the application procedure shall be strictly as per the manufacturer’s specification including the tinting costs.
400
-
-
Expansion Joint
Providing and sealing of control joints of groove size upto 50 mm X 25 mm size , in grade slab of concrete with fresh Polysulphide Sealant, Dr. Fixit Pidiseal PS 41 G, of Pidilite Industries Limited /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make, including providing filler board inside the expansion joint of adequate size during resurfacing treatment for maintaining the joint depth, apply bond breaker tape on top of backer rod, rounding of edges including providing and applying Proper Backer Rod for Establishing Correct Joint Depth, Sealant Primer , Dr. Fixit Pidiprime /equivalent material of Fosroc /SIKA/BASF/Sunanda/ Krishna or any other approved equivalent make A, two coats compatible with the brand of Polysulphide and preparing the surface and applying masking tape along the edges of joints to prevent accidents spillage of sealant on top surface and to give neat finish to the sealant and removing the masking tape after application of sealant etc. complete as per direction of Engineer-in-Charge.
Supplying and applying waterproofing membrane with specially formulated single-ply ,EPDM, E45, non-reinforced (Ethylene, Propylene, Diene Monomer) membrane. Fixed at both ends of 100 mm width with suitable adhesive and laid loosely at middle in the expansion joint.
Protecting the expansion joint system with Aluminium sheet in a U shape fashion, extending the same up to 60 mm on both side horizontal section and vertical section, with riveting one side only.
Note : The Rate also includes removing of existing Expansion joint from building if required.
50
-
-
Haunching the slab-wall joint to an average size of upto 100mm x 100mm with CM 1:3:1 admixed with NITOBOND SBR @ 1Kg per bag of cement etc complete as per directions of EIC
200
-
-
Flooring Works
-
-
-
Cement concrete flooring of 40 mm thick 1:2:4 (1 cement : 2 coarse Msand : 4 graded stone aggregate) with 6mm thick nominal stone aggregate finished with a floating coat of neat cement, including cement slurry, including the cost of nosing of steps complete as directed by Engineer-in-charge.
100
-
-
Vacuum dewatering of concrete using vacuum dewater technique for evaporation by way of removing the excess water using rigid or flexible suction mat incorporation filler layers and vacuum filler layers and vacuum generator (80% to 90% vacuum is to be applied at the rate of 3 to 5 minutes per 25mm depth ), finishing with power trowel to get smooth finish all as per specifications, drawings and directions of the Engineer-in-charge for grade slab.
300
-
-
Providing over RCC flooring when concrete is in green condition, finishing top with hard finishing coat using non – metallic floor hardener of Chhabdur or Hardtop or any other equivalent from M/s. Fosroc, STP, Demach, Huntsman, Pedilite, Sunanda Chemicals, Agro Chemicals, MBT of approved quality and make at spread rate of 7Kg/Sqm or as specified by manufacturer for heavy duty floor finish including spreading after vacuum dewatering, ramming, consolidation, finishing smooth using power trowel to required levels or slope as specified, curing, etc., complete as specified and directed with vacuum dewatering
300
-
-
Providing and laying Premium Double charged vitrified tile polished finish of size of Tile 600 x 1200 mm using 10mm thick tiles of 1st quality, non-skid, matt finish and non slipperry, double charged , of make Khajharia,Johnson, Somani and Rak s or equivalent approved make with water absorption less than 0.08% and conforming to S:15622, in all colours and shade, jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.
Note:-
i) Quoted rate shall include extra adhesive required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
a) In flooring with rustic/matt finished 600X1200mm of double charged vitrified tile in Flooring with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477, in adequate thickness as required at site of make MYK Laticate,Mapei,Dr.Fixit,RAF or equivalent approved make.
400
-
-
In skirting/dado of size 600X1200mm tile with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477,in adequate thickness as required at site of make MYK Laticate,Mapei,Dr.Fixit,RAF or equivalent approved make.
40
-
-
Providing and laying Double charged vitrified tile polished finish of size of Tile 600 x 600 mm in floor using 10mm thick tiles of 1st quality, non-skid, matt finish and non slipperry, double charged , of make Khajharia,Johnson, Somani and Rak s or equivalent approved make with water absorption less than 0.08% and conforming to S:15622, in all colours and shade, jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc.
Note:
i) Quoted rate shall include extra adhesive required to match the water proofing plaster if any to maintain the lines and plumb of dado.
ii) The quoted rate shall include border / combination of tiles as instructed by the Engineer in Charge
iii)The sizes of tiles mentioned are approximate and subject to the availability in market during execution. If the required size is not available the next higher size of tiles shall be used without any extra cost to the Department. The tenderer may note the same and quote accordingly.
-
-
-
a) In flooring with rustic/matt finished 600X600mm of double charged vitrified tile of
make Somany/Kajaria or approved equivalent laid with Flooring with cement based high polymer modified quickset
adhesive (Water based) conforming to IS: 15477, in adequate thickness as required at site of make MYK Laticate,Mapei,Dr.Fixit,RAF or equivalent approved make.
400
-
-
In skirting/dado of size 600X600mm tile with cement based high polymer modified quickset adhesive (Water based) conforming to IS: 15477,in adequate thickness as required at site of make MYK Laticate,Mapei,Dr.Fixit,RAF or equivalent approved make.
40
-
-
Extra for Supplying and Grouting gap of tiles (upto 3mm) by filling the joints in flooring and skirting/dado using chemical resistant, hard wearing and impervious epoxy based joint filler of Pidilite/MYK/Fosroc or equivalent make in approved colour as per pattern of tile as per directions of EIC.
600
-
-
Extra over Item 8.051 or 8.052 for laying tiles on mix of sand and cement (1: 4) of thickness upto 20mm to provide requisite slope or levels.
200
-
-
Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut Granite stone for treads/ risers /steps / ramps /wall of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels.
50
-
-
Providing nosing and groove cutting (3 Nos. Parallel Groove throughout the length for each step) for treads to stones like marble, granite and kota etc to the required shape etc. complete as specified and directed
25
-
-
Repairing the existing acid resistant tile/brick lining joints by removing the damaged pointing and filler to the full depth of the tile, cleaning, preparing the joint with potassium silicate mortar, sealing the joint using carbon filled sulphur cement complete all as directed by engineer-in-charge.
20
-
-
Finishing of floorings with screed vibrator /surface vibrator/power trowel to get smooth finish including the cost of hire charges of power trowel, labour electricity etc complete as per directions of EIC
300
-
-
Finishing Works
-
-
-
Providing and applying white cement based putty in two coats with average thickness not less than 1 mm, of Birla make or any other approved manufacturer, over the plastered wall surface (external/internal) to prepare the surface even and smooth complete.
8000
-
-
Painting with 2 coats of Premium Acrylic emulsion paint of interior grade Asian Paints Royale Shyne or equivalent in Berger/Nerolac makes of first quality and required shade over walls, ceilings etc.,(interior paint) including sand papering, preparing the surface smooth including necessary repairs to scratches, filling in crevices, holes and cracks etc., with approved filler etc., complete all as specified and directed.
8000
-
-
Applying priming coats with water thinnable cement primer on wall surface having VOC content less than 50 grams/litre of approved brand and manufacture including sand papering, preparing the surface smooth including necessary repairs to scratches, filling in crevices, holes and cracks etc., with approved filler etc., complete all as specified and directed.
8000
-
-
Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives - Apex Ultima Protek of Asian paint or equivalent. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.
6000
-
-
Painting wooden and masonary surfaces with one coat of applicable primer and two coats of synthetic enamel paint Asian, Pidilite, Johnson & Nicklson, Nerolac, berger, of approved shade including preparing surfaces, cleaning, sand papering, including applying and filling crevices or wherever required suitable filler etc, scaffolding, cleaning, etc., complete.
400
-
-
Hacking the existing cement, concrete floor surface at an average of 5 to 7 indentation of 3 to 5 mm deep per 50 sqcm with hacking hammers or chisels, cleaning the aears, disposing the debris within a lead of 50 m etc., complete.
400
-
-
Removing dry or oil bound distemper, white or colour wash/lime punning/ water proofing cement paint and the like by scrapping, sand papering, buffing using manual/mechanical methods and preparing the surface smooth including necessary repairs to scratches etc. complete as per directions of EIC
3000
-
-
Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after .The scaffolding system shall be
stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge .The elevational area of the scaffolding in excess of 3.5m height shall be measured for payment purpose .The payment will be made once irrespective of duration of scaffolding.
2000
-
-
Plumbing and sanitation Works
-
-
-
Providing and fixing 110 mm n.b.un-plasticised PVC rain water pipes with necessary PVC clamps and wooden gutties of approved make conforming to IS: 13592 type ‘A’with injection moulded fittings jointing with approved synthetic adhesive seal rings conforming to IS: 5382 embedding the slab junctions leakproof testing complete in line, level and plumb all as directed.
200
-
-
Dismantling of old IWC/EWC and "S" or "P" trap at site including removal of cistern if required, complete with disposal of dismantled material i/c malba, all complete as per the direction of Engineer-in charge
10
-
-
Providing, laying, jointing, fixing, testing and painting as per color code of NFC heavy quality (Class ‘C’) M. S. GALVANISED PIPES as per IS:1239 (TATA/Jindal or equivalent make) including heavy quality HB fittings like elbows, collars, tees, unions, couplings, reducers, enlargers, bends and all other fittings required for the completion except screwed flanges confirming to IS:1239 and also as per the code of practice of water supply in buildings IS:2065 including removing of exisitng G.I. pipes and fixtures if any, laying under the floors, making holes/chasing in walls, roof slabs and making good the same to the original condition including cost of all jointing material like hemp yarn, white or red lead/Teflon tape, clamps, wooden gutties, screws, cement and painting with two coats of anticorrosive bitumastic paint for embedded portion and two coats of synthetic enamel paint over a coat of zinc chromate/red oxide primer etc., complete including pressure testing the pipes with clean water as per specifications and connecting to existing supply lines or fittings and fixtures as the case may be.
-
-
-
15 mm n. b.
20
-
-
20 mm n. b.
50
-
-
25 mm n. b.
50
-
-
32 mm n. b.
40
-
-
40 mm n. b.
40
-
-
Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (SDR-11) conforming to IS 15778 of Ashirvad/Supreme or approved make, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe on exposed/recessed/underground surfaces to correct line, level, plumb using clamps as directed. This includes removing of existing pipes and fixtures if required, jointing of pipes & fittings with one step CPVC solvent cement, teflon tape, cost of cutting chases wherever required and making good the same with cement concrete/mortar, cutting or making hole or chases in RCC or brick work structure such as wall, column, beam, slab, chajja, dado etc. for passing the pipe line and reinstating all the damage to its original condition including testing of joints at cerain locations complete as specified and directed
-
-
-
15 mm dia-concealed including cutting chases and making good the walls etc
100
-
-
20mm dia-concealed including cutting chases and making good the walls etc
100
-
-
25mm dia-concealed including cutting chases and making good the walls etc
80
-
-
32mm dia-concealed including cutting chases and making good the walls etc
50
-
-
40mm dia-concealed including cutting chases and making good the walls etc
50
-
-
20mm dia-on exposed surface
100
-
-
25mm dia-on exposed surface
100
-
-
40mm dia-on exposed surface
80
-
-
50mm dia-on exposed surface
50
-
-
Providing and fixing in position CPVC ball valves of following sizes of Ashirvad/Supreme make confirming to SDR 11 fittings, including jointing material etc, as specified and directed.
-
-
-
20 mm DN
5
-
-
25 mm DN
5
-
-
40 mm DN
5
-
-
50 mm DN
5
-
-
Supplying and fixing following size uPVC UV-Stabilised soil / waste/rain water pipes (conforming to IS 13592) and fittings (conforming to IS 14735) of Grade B laid in floor & on exposed faces of wall of Ashirvad/Supreme make, including scaffolding, removal of existing pipelines if any, laying the pipe below floor / ground to proper slope and gradient, jointing the pipe with Solvent Cement/Rubber ring gasket, ensuring water-tightness for the pipes laid as per codal provisions, cutting to the required length including short pieces, fittings with & without door, fittings such as plugs, tees, couplers, reducers, cross tees, reducing tees, elbows, bends, cleaning pipe, single & double Y, vent cowl, gaskets, offsets, Tank / WC connectors, cowls, clamps, etc, complete as specified and directed.
-
-
-
50 mm DN
30
-
-
75 mm DN
30
-
-
110 mm DN
30
-
-
160 mm DN
30
-
-
50 mm DN-concealed including cutting chases and making good the walls etc
30
-
-
Providing uPVC Floor Trap / Nahani Trap of following size conforming to IS 14735 with CP jalli on top, fixing the trap in position and connecting with waste water pipe by cement solvent / as per manufacturer's recommandation, embedding the trap in cement concrete 1:2:4 to correct level and gradient, closing the side inlets with plugs if required etc. all complete as specified and as directed
-
-
-
Nahani Trap of 110 X 75mm size of Ashirvad (70001249)/Supreme make
20
-
-
Multifloor trap of 110 x 75 x 50 mm size of Ashirvad (70001252)/Supreme make
20
-
-
Providing and fixing of best quality PVC P trap for urinals of size 110mm X 110mm of Ashirvad (70002811)/Supreme make or approved equivalent with CP grating on top including necessary 1:2:4 cement concrete for embedding the trap connecting the trap to waste pipe, etc, complete as specified and directed.
10
-
-
Providing and fixing in position UPVC bottle Gully Trap of Supreme (Product code NUPHGT110G)/Ashirvad make of size 200mmX160mm including embedding the trap in 1:2:4 cement concrete, construction of brick masonry chamber in 230 mm thick brick masonry in cement mortar 1:4 over cement concrete bed of 1:3:6 of 100 mm thick, embedding the trap, plastering with cement mortar 1:4, 12 mm thick on inside & outside and all exposed surfaces, finished with a floating coat of neat cement, providing and fixing heavy duty C. I. frame and cover of size 300mmX300mm, 40mm thick cement concrete 1:2:4 bed over brickwork, painting the grating frame and cover with 2 coats of approved anticorrosive bitumastic paint, necessary connection with existing line etc., complete as directed
5
-
-
Supplying, lowering, laying below mentioned nominal bore RCC SPUN PIPES (Class NP2) conforming to IS:458 with necessary collars, laid to correct grade, slope and level at and at all depths below plinth level including cutting to lengths, jointing with hemp yarn and Cement Mortar 1:2, caulking the joints, finishing, curing, etc., complete as specified and directed.
-
-
-
100 mm dia RCC pipe
50
-
-
150 mm dia. R.C.C. pipe
50
-
-
300 mm dia. R.C.C. pipe
50
-
-
Removal of water tank of capacity upto 10 kL from heights of upto 15 m and taking down to ground level and handing to department stores including the cost of removing all plumbing fittings etc as directed by EIC.
4
-
-
Dismantling Works
-
-
-
Cutting the existing RCC slab/Floor/Road including the existing floor finish if present using diamond floor saw/cutter neatly to the required length, shape, size up to a depth of 200 mm without damaging/distrubing the adjoining areas complete all as directed by EIC.
100
-
-
Cutting using diamond saw or any other suitable equipment grooves of size 6mm X 12mm in flooring at construction joints or as directed by Engineer incharge, including filling with asphalt, cleaning the joints using compressed air, drying the joint before application complete as directed.
100
-
-
Removing the wooden door shutter from door frame, including carefully disconnecting of hinges and door closer from the shutter, removing the door stopper, cutting the door shutter from below as per the available height of door frame after tiling in the room, refixing of the door shutter to the door frame and connecting the hinges, door closer and door stopper with the door shutter, complete as directed by Engineer-in-charge.
20
-
-
Transportation of removed damaged/corroded doors, windows and clerestory windows (steel /aluminium/ wood) shutter including chowkhats,architrave, holdfasts etc., carriage of debris by engaging tractor trolley including cost of fuel, wages of driver and required manpower for loading, transporting up to a lead of 2.0 KM, unloading and stacking in the placed shown by Engineer-in-Charge complete as directed.Note: The size of tractor trolley shall not be less than 3.00 m x 1.90 m x 0.80 m.
15
-
-
Removing carefully existing chainlink fabric from angle iron posts and struts by removing hook bolts, nuts, etc, straightening GI rods (vertical as well as horizontals) etc., rolling back the removed chainlink, collecting hooks, bolts and nuts, stacking including cutting of iron angle posts, dismantling of PCC pedestals, transporting the materials to Departmental stores etc., complete as directed by Engineer-in-charge. Note: Area of the chain link fabric will be measured for payment.
500
-
-
Removing the existing broken/cracked A.C. roofing Sheets,ridges, hips, vallys, gutters, FRP roofing sheets etc., including G.I. Bolts, Nuts, washers and bitumen washers etc. carefully including required scaffolding and stacking the materials at a lead of 1.0 km as directed by Engineer-in- charge.
800
-
-
Dismantling/breaking the existing plain cement concrete surfaces carefully in flooring, ramp etc. to the required size, using pneumatic cutters or any approved means including disposing of debris within a distance of 50 m etc., complete as specified and directed.
75
-
-
Dismantling very carefully the existing reinforced cement concrete at all depths and heights below and above plinth level using pneumatic cutters or any approved means including cutting the reinforcement and transporting bars to departmental stores disposing the debris within the lead of 50 m complete as specified and directed
75
-
-
DISMANTLING THE Acid tile/ceramic tile/vitrified tile etc. including dismantling of bedding mortar, stacking of materials within 50 metres lead and disposing of debris within 50 m lead. etc., complete as specified and directed.
800
-
-
DISMANTLING OLD PLASTER OR SKIRTING, raking out joints and cleaning the surfaces for plaster including scaffolding, disposal of debris to the dumping ground within 50 metres lead. etc., complete as specified and directed.
700
-
-
Dismantling very carefully the existing Brick masonry in cement motor with plastering on both sides very carefully at depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacking of useful materials and disposing the unserviceable debris within the lead of 50m, etc., complete as specified and directed.
50
-
-
Dismantling the existing MS tubular gate including cutting the steel posts / removing hold fasts from wall staking and handing over useful materials to departmental stores,disposing the unserviciable debris wiyhin the lead of 50m, etc., complete as specified.
50
-
-
Dismantling very carefully the existing structural steel work at all levels in MS structural sections like angles, channels, MS plain/chequered plates, flats, etc., including scaffolding, cutting of structural steel members by gas cutters or by any approved method, removing the nuts, bolts etc., as required, lowering stacking the reusable material at site and transporting the material to Departmental stores etc., complete as directed
5000
-
-
Dismantling very carefully the existing RR masonry in drain etc below/above FFL at all depths and heights including erection of suitable scaffolding, stacking of useful materials and disposing the the unserviceable debris within the lead of 50m etc., complete as specified and directed,
10
-
-
Dismantling aluminium/ Gypsum partitions, fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge
300
-
-
Dismantling manually/ by mechanical means the existing bituminous road upto required depth including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge .
20
-
-
Dismantling and stacking within 50 metres lead, T or L iron or pipe fencing posts or struts including all earth work and dismantling of concrete etc. in base of.
12
-
-
Providing and fixing GI barbed wire of approved quality of garvanised barbed wires of 2 strands of 12 guage and 4 barbs of 14guage at 100mm centre to centre including unrolling,stretching and fixing tight with6mm dia approved gI hooks, bolts,nuts, wadhers etc complete as directed
300
-
-
Providing and laying SBR Polymer modified (of approved make @ minimum 2% by wt. of cement used) plain/reinforced concrete jacket for the structural members e.g. columns, pillars, piers, beams etc with concrete having the specified minimum characteristic compressive strength [with ordinary portland cement, coarse sand and graded stone aggregate of 10mm maximum size in proportion as per design criteria] with specified average thickness allround existing core of RCC member.
Note: Rates shall be for finished surface area of concrete and shall include the cost of making holes in existing RCC slab, if required, for pouring concrete in shuttering mould of jacket and appropriate approved Super-Plasticiser for rendering concrete as flowable self compacting and SBR polymer but shall exclude cost of reinforcement, bond coat, Shear Keys, centering and shuttering, strutting, propping etc (Payment under this item shall be made only after proper wet curing has been done and surface has been satisfactorily evaluated by sounding/ tapping with a blunt metal instrument)
-
-
-
50mm thick in Grade M 25 with cement content not less than 330 kg per cum
100
-
-
Supplying and fixing in position approved MOTOR OPERATED (push & pull) steel rolling shutters made from M.S. lathes of 1.25 mm thick including supplying and fixing all necessary fixtures, fittings, top hood, guide channels, shutter suspension shaft with tested springs, ceiling strips providing 4 nos. of approved quality of ball bearings, locking arrangements, handles, lugs, cutting, drilling necessary holes in concrete, grouting lugs with cement concrete 1:2:4, including providing and fixing 1.0 HP motor of Crompton Greaves, L&T or any approved equivalent along with other accessories for on and Off, applying one shop coat of approved Zinc chromate primer and two coats of synthetic enamel paint complete as shown in the drawing and as directed (measurement for rolling shutters will be as per the structural openings, hoods shall not be measured separately).
20
-
-
Making holes in brick walls(upto thickness 350mm) upto size of 750 mm diameter for exhaust fans at height upto 15 m from ground level.
30
-
-
Dismantling of manual operated/ motorised operated rolling shutter including the cost of dismantling all the fittings like top hood, guide channels, shutter suspension shaft, handles, lugs etc complete as per directions of EIC
20
-
-
Dismantling Reinforced/Plain cement concrete with hydraulic breaker including Driver Wage and fuel cost including loading and unloading of the debris with tractor upto 1km lead
50
-
-
Electrical Works
-
-
-
Making chases up to 7.5x7.5 cm in walls including making good and finishing with matching
surface by filling mortar/concrete after fitting of pipes/cables/conduits etc.
200
-
-
Supply and installation of following light fittings owith all accessories like supporting hard ware downrods etc as required to complete the installation in all respects Makes: PHILIPS, WIPRO,BAJAJMakes of LED chips :NISCHIA, OSRAM, LUMILEDS,CREE LED high efficient 2ft X 2ft, generation-V or better, recess mounted light fitting with CRCA housing, with output 3600 Lumens, Luminaire efficacy of around 120 lm/W, IP20, surge protection of minimum 4KV, driver efficiency 80%, power factor0.95, THD10%, CRI80, CCT- 5700K, voltage range 120-270V AC, Ripple5%, Electrical insulation class-1, EMI/EMC compliance.
-
-
-
Supply
100
-
-
Installation
100
-
-
Supply and installation of modular switch boards along with required face plate, frame of following sizes with latest model rugged modular type sparkproof switches and shuttered universal sockets. Colour of the switches and sockets/frame shall be Grey colour.
Makes: CRABTREE MURANO, NORTHWEST ARTISA, LEGRAND ARTEOR, SCHNEIDER ELECTRIC ZENCELO
-
-
-
12 modular switchboard with 8 Nos 6A Switches and 4 No 1 module Fan regulators
-
-
-
Supply
3
-
-
Installation
3
-
-
12 modular switchboard with 8 Nos 6A Switches and 2 No 2 module Fan regulators
-
-
-
Supply
10
-
-
Installation
10
-
-
12 modular switchboard with 4 No 6A socket and 4 Nos of 6A switches
-
-
-
Supply
6
-
-
Installation
6
-
-
8 modular switchboard with 1No 2 module Fan regulators, 6 Nos of 6A switches
-
-
-
Supply
6
-
-
Installation
6
-
-
8 modular switchboard with 8 Nos 6A Switches
-
-
-
Supply
6
-
-
Installation
6
-
-
Supply and pulling of following sizes of flexible FRZH copper wires to be drawn in already concealed PVC conduit/channels with ferruling on both ends excluding cost of pipes, channels and switch boards.
Makes: KEC INTERNATIONAL LTD, KEI INDUSTRIES LIMITED, ANCHOR, UNIVERSAL CABLES LIMITED, FINOLEX
-
-
-
1.5 Sq.mm FRZH Copper wire from switchboard to light fitting /fan
-
-
-
Supply
1500
-
-
Installation
1500
-
-
2.5 Sq.mm FRZH Copper wire for incoming circuit to switchboard
-
-
-
Supply
500
-
-
Installation
500
-
-
4 Sq.mm FRZH Copper wire for AC and geyser wiring
-
-
-
Supply
300
-
-
Installation
300
-
-
Supply and installation of 25 mm dia 1.8 mm thick PVC conduits and required junction boxes confirming to IS with accessories like bends, couplers etc in wall , false ceiling etc complete
Make: Sudhakar / AKG
-
-
-
Supply
767
-
-
Installation
767
-
-
Supply and installation of 32 x 20 mm DLP plastic trunking system with required clamps for fixing, cover, end caps etc complete including required angles and junctions
Make: Legrand/Hager/Schneider/Honeywell
-
-
-
Supply
300
-
-
Installation
300
-
-
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements