Nuclear Fuel Complex Tender

Supply, fabrication and erection of TMT Reinforcement bars of grade Fe-500D or more conforming to IS 1786 of Tata, Vizag steel, Sail, JSW, JSPL make for Reinforced cement concrete items at all depths and heights below and above plinth level, including transport to site, loading and unloading, making fan hooks of required shape, dowels for bonding masonry, transporting steel to site, decoiling, removing of scales, straightening, cutting, bending, fixing bars with chairs, space bars wherever required, in position with two strings of 18 gauge soft drawn annealed MS binding wire inclusive of its supply etc., complete as specified and as per direction of Engineer- in-Charge.

Supply, fabrication and erection of structural steel work using standard steel rolled sections/standard plain plates/chequered plates coforming to IS 2062, of M/s tata, vizag steel, Jindal or SAIL or any other make using ingots of above firms at and at all depths and heights below and above plinth level, transporting materials to site, removing of scales, straightening, cutting, welding (using welding rods of D&H, ADVANI, PHILIPS)/bolting and 20 mm dia anchor fastners for columns, foundation bolts, including painting with one coat of approved zinc chromate primer and two coats of Synthetic Enamel paint (Asian paint, Berger, Johnson and Nickelson, Pedilitie, Nerolac) of approved shade for all exposed surfaces, complete as specified and directed.

Brick work as per IS 2212 using fly ash bricks conforming to IS 12894 of Class Designation 7.5 and above at all height/depth with cement mortar 1:6 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 6 crushed coarse Sand (conforming to IS 2116)} including raking out joints, curing, scaffolding etc., complete as specified and directed.

HALF BRICK masonry as per IS 2212 using fly ash bricks conforming to IS 12894 of class designation 7.5 or above above FFL in cement mortar 1:4 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 crushed coarse sand), including scaffolding, raking out joints, curing and with Reinforced Cement Concrete (RCC) M15 (1:2:4) stiffeners of depth 75mm at every 900 mm height including form work, curing etc., complete as specified and directed, but excluding reinforcement. Note: Reinforcement will be measured and paid for separately under relevant item of schedule

Cement plastering 12mm to 15 mm thick for internal walls in cement mortar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 River Sand (conforming to IS 1542)} fininshed smooth at all height above plinth level over brick walls or concrete surface including making necessary grooves in between junctions or brick masonary and RCC and also other places wherever required over brick walls or concrete surface preparation of surface, steel/tubular scaffolding curing etc., complete as specified and directed.

Cement plastering 20mm thick in Two (2) coats over exterior masonry and concrete surfaces at and at all heights/depths above/below plinth level with 12mm thick base coat in Cement Mortar 1:4 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.) : 4 River Sand (conforming to IS 1542)}, 8mm thick finishing coat in Cement Mortar1:3 {1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd., KCP) : 3 River Sand (conforming to IS 1542)}, final rendering including addition of approved integrated waterproofing compound @ 2% by weight of cement or as per manufacturer’s Specifications for the base coat of make M/s. Fosroc/Demech/ Huntsman/ Pidilite/ SIKA Qualcrete / MBT/Sunanda Chemicals, making necessary grooves, bands, drip moulds, etc., as required, double steel/tubular scaffolding wherever necessary, curing, etc., complete as specified and directed.

Providing 15mm thick Ready Mixed Plaster (RMP) of approved make for internal / external faces of brickwork/ concrete/ RRM Wall, cable pits, trenches, chambers, steps etc. surfaces for all walls and beams flush with walls, mullions etc. including preparation of the surface even and smooth to correctline, level, plain & plumb including one coat of cement paste for smooth surface for water flow, rounding if necessary at all lead and locations on slope, plain & curved surfaces, curing, cleaning, scaffolding, complete all as per specifications and as directed at site by theEngineer-in-Charge. The mortar used shall be using factory manufactured pre mix/ready mix of 'Readiplast' of M/s Ultratech Cement Ltd / Silicoplast / or other approved equivalent make,using fully treated dry, well graded natural sand conforming to IS 383 suitable for external plastering, having low rebound properties, low water demand for curing properties,mechnical mixing with water in a metalic tray only to make good consistency as per the specification of the Manufacturer.

a) 12-15mm in single coat

b) 20mm in two coats

Providing and fixing plaster mesh/chicken mesh 150mm wide manufactured out of hot dipped galvanised iron of nominal thickness 0.35mm size 25mm x 25mm with a zinc coating of 120gms per sqm width, along route of walls chipped for services, junction between RCC and brick walls including cost of materials, labour for fixing complete as per specifications.

Providing 1 mm thick cement based putty of Asian / J K /Birla or approved make in two coat at walls, ceilings etc at all heights including sacaffolding, surface preparation, sand papering, removal of loose paint, making necessary repairs to scratches, filling in crevices, holes and cracks etc, providing one coat of primer for receiving the putty the second coat of putty should be rubbed thoroughly by sand paper up to required finish even surface and smooth as directed

Providing 3 or more coat of interior premium emulsion paint of Asain Apcolite suprema /Dulux interior acrylic premium emulsion of required shade of interior grade, having VOC content less than 50 grams/liters including one coat of approved suitable interior primer at all heights above plinth level inside rooms including sacaffolding, surface preparation, sand papering, removal of loose paint, making necessary repairs to scratches, filling in crevices, holes and cracks etc complete and as directed.

Providing and Fixing  Light weight Calcium Silicate False Ceiling with Silhouette Grid at all heights of Aerolite make with 15mm thick integral densified micro edge light weight calcium silicate tiles of size 595X595mm of approved design, texture and pattern having 100% RH – HUMIDITY RESISTANCE, non-combustible as per BS 476, Noise Reduction Coefficient of 0.5, Light reflectance above 85%, Thermal Conductivity less than 0.05 W/m K, to be laid in true horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized steel sections of 0.4mm thick Silhouette Profile, rotary stitched double webbed white with 6mm reveal profile comprising of main ‘T’ runners of size 15X42mm of length 3000mm, cross-T of size 15X42mm of length 1200mm and secondary intermediate cross-T of size 15X42mm of length 600mm to form grid module of size 600X600 mm , wall angle of size 22x19x0.4mm to be fixed all around the wall. Main ‘T’ runners to be suspended from the ceiling using GI slotted cleats fixed to ceiling with 50mm long 8 mm outer dia M-6 dash/anchor fasteners, 6mm dia fully threaded GI hanger rod with L-shape level adjuster of size 85X25x2mm or 4mm GI hanger rod with butterfly clip, including scaffolding, at all heights, complete as per specifications and as directed by Engineer-In-charge. Note:Hanger syster shall be decided as per site conditions and height of false ceiling as directed by Engineer-in-charge.

Providing & fixing 600mmX600mm glazed vitrified tiles/double charge vitrified tiles of polished/matte finish conforming to IS 15622 for flooring ( thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid on 20 mm thick cement mortar 1:4 (1 cement (M/s. ACC, Ultra Tech, Raasi, Birla, Coromandal, M/s. Andhra Cement Ltd.): 4 coarse sand) including grouting the joints with spacers and epoxy grout of matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Providing & fixing 600mmX600mm glazed vitrified tiles/double charge vitrified tiles of polished/matte finish conforming to IS 15622 for flooring (thickness as specified by manufacturer) of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid using high polymer modified quick-set tile adhesives (Water based) for floors conforming to IS: 15477 of Roff/MYK or approved make, hacking the existing surface for recieving the tiles, close jointed and pointed with matching epoxy grout of required colour as required. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily.

Providing & fixing glazed vitrified tiles/Double charge vitrified tiles, polished/Matt finish ( thickness as specified by manufacturer) conforming to IS 15622 of required size for dado, skirting, risers of steps of make Johnson, Somani, Kazaria of required shade, design, colour and pattern laid using suitable high polymer modified quick-set tile adhesives (Water based) of MYK/Roff make conforming to IS 15477, close jointed and pointed with spacers of 2/3mm and matching epoxy grout matching epoxy grout of required colour as required, hacking the existing surface for recieving the tiles complete as specified and directed.

Providing and fixing 16mm to 18mm thick gang saw cut, mirror polished/honed finish, machine cut granite for floors, window sills, jambs, soffits, facias, staircase and similar locations, of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 ( 1 cement : 4 Coarse sand) or using chemical adhesive, jointed with epoxy grout of matching pigment, including rubbing, moulding, polishing, forming nosing at edges, making of 3 no of grooves for staircase threads wherever required. complete as specified and directed.

Providing and fixing factory made uPVC white colour sliding cum fixed glazed windows of make Deltra/Aparna/Greentech comprising of uPVC multi-chambered frame three track three panels sliding window made of frame 115 (and above) x 45 (and above) mm & sash 44 (and above) x 55 (and above) mm both having wall thickness of 2.3 ± 0.2 mm, duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), including providing and fixing single glazing made of 6mm thick toughened glass, uPVC extruded glazing beads of appropriate dimension, EPDM gasket, necessary locking arrangement, nylon rollers, G.I fasteners 100 x 8 mm size for fixing frame to finished wall, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Providing and fixing factory made uPVC white colour casement windows/casement cum fixed windows with single/double panel comprising of uPVC multi-chambered frame of make Deltra/Aparna/Greentech with 3D/friction hinges made of with top hung ventilator with 3D and S.S. friction hinges (400 x 19 x 1.9 mm) made of frame 64mm(and above) x 50(and above) mm, sash/mullion 64(and above)mm x 70(and above) mm all having wall thickness of 2.3 ±. 0.2 mm , and mullion (where ever required) extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), including providing and fixing double glazing made of 6mm thick toughened glass, EPDM gasket, zinc alloy (white powder coated) casement handles, SS Friction hinges and one handle on each side of panels along with necessary locking arrangement, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Providing and fixing factory made uPVC white colour fixed/Top Hung ventilators with glazing/louvers comprising of uPVC multi-chambered frame of make Deltra/Aparna/Greentech with top hung ventilator with S.S. friction hinges made of frame 45(and above) x 55(and above) mm, sash and mullion 45(and above) x 55(and above) mm all having wall thickness of 1.9 ±. 0.2 mm , extruded profiles duly reinforced with 1.60 ± 0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to uPVC profile), including providing and fixing single glazing made of 5mm thick float glass/louvers as per manufacturer's specifications, EPDM gasket, zinc alloy (white powder coated) casement handles, SS Friction hinges and one handle on each side of panels along with necessary locking arrangement, G.I fasteners 100 x 8 mm size for fixing frame to finished wall and necessary stainless steel screws, etc. Profile of frame & sash shall be mitred cut and fusion welded at all corners, mullion (if required) shall be also fusion welded including drilling of holes for fixing hardware's and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealent over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge.

Veneer panelling/Door frame with 12mm ply with wooden framework -Providing and fixing in properline and level,12mm thick Water proof plywood of approved make BWP conforming to IS 710, 100% Gurjan/Century/Artees/Login with vineer finish of 4mm thick of Natural vineer/ flaming / Royal club/ greenlam conforming to sample shade approved with approved shade of polish & finished in approved melamine , fixing panel to existing wall by means of approved wooden screws/ nails with inside Sound Proof Acostical material panel glass wool of 25mm thick and wooden framework of size 600mm X 600mm , made out of 18/12mm thick commercial ply of BWP grade conforming to BIS 710 of 100% Gurjan/Century/Artees/Login make cutting the ply and fixing with nails/ metallic wooden screws in line , plumb and level The edges should have matching wood beading finished in approved melamine including applying one coat of fire retardant paint complete as specified and directed. Note :- Making rebate for door frames shall be done in the panneling and no extra payment will be made for the same.

Providing and fixing in position double/single leaf flush door shutters as per below specifications Door shutter made of solid block board core, 35 mm thick including ISI marked stainless steel butt hinges, at all heights above plinth level internally lipped with second class teakwood, 25 mm deep along all edges of shutters bounded with water-proof type phenol formaldehyde synthetic resin, hot pressed, Chemicaly treated and with commercial ply finish on both faces providing and fixing under pressure with approved type adhesive including providing and fixing 2nd class teak wood rebate at meeting junction of shutters in case of double door shutters, including providing teakwwod veener not less than 0.5mm on both sides and with three coats of melamine polish of approved tint & shade over French polish including preparing the surface to get the desired finish complete as specified and directed. Note :- The Door shall be made as per attached drawing/picture as per tender

Providing & fixing stainless steel tower bolts of min size 200 X10mm size with necessary screws complete as specified and directed .

Providing & fixing stainless steel door Handles of minimum hole to hole distance of 250 mm and dia min 20 mm complete as specified and directed .

Providing and fixing Heavy quality Stainless Steel butt hinges of size 125mmX75X4mm with necessary screws etc complete.

Providing and fixing mortise door lock for wooden doors double/single complete as specified and directed .

Providing and fixing hanging floor Door stopper with necessary screws etc. complete as specified and directed.

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer of HYPER/Godrej make confirming to IS 3564 for wooden doors weighing upto 65kg with necessary accessories, fixtures, fittings, scews etc

GLASS PARTITION :-Providing and fixing glass partition with 12mm Thk SAINT GOBAIN/MODI GUARD clear Toughen glass with 3 M frosted glass film of approved make, supported at top WITH ozone Brand L Connector Fixing on 18mm thk 710 Bwp Ply Framing Fixing From Slab and Bottom AluminiumALUMNIUM U Track With Patch Fittings and connectors with the manufacturer's specifications. Cost to be inclusive of joints between glasses to be filled with clear sealant etc. complete as specified and directed by EIC.

GLASS DOOR :- Supplying and fixing frameless 12MM thick clear toughened glass SAINT GOBAIN/MODI GUARD with 3 M frosted glass film , door with SS handles, floor spring, locking, arrangements with SS patch fitting (approved make) etc. compleat. All SS member to be in Satin/hairline/mirror finish as per EIC/Architect's choice complete as specified and directed by EIC.

FLOOR SPRINGS :- Providing & fixing Ozone Stainless Steel Double Cylinder Floor Spring Glass Package Set (Silver) or equiavlent tested to 5,00,000 cycles, as per : EN 1154 complete as specified and directed by EIC.

Providing and fixing in position Aluminium partition, door/windows/ventilators with single/double side hung/tuophung/sliding shutters etc., using extruded and integrated bronze/medium grey colour, anodized 15 microns (Jindal/Indal makes)   manufactured to relevant IS specifications including locking arrangement for windows, handles, aldrops, door stopper, magnetic catcher, hinges, friction hinges, aluminium push plates, sliding rollers, aluminium hardware fixtures, cleat angles, beadings etc as per the requirement, gaps of structural opening to aluminium frame work to be filled with siliconate / polysulphide sealant, fixed suitably to brick wall RCC column structures complete as directed. NOTE: Payment shall be  made  per Kg basis. Aluminium sections such as shutter frames, track window / door frame/beading channel for glass adjustable louvers etc., shall only be measured linearly as per actual / finished cutting size and multiplied with sectional weight of the individual section and the total quantity of aluminium section will be arrived at for payment without any allowance for wastage No separate payment shall be made for fittings such as locking arrangement, door handles, hinges, friction hinges, rollers, fittings and fixtures, gasket, cleat angles etc. 

Providing and fixing 100mm 6 lever mortice lock for aluminium doors without pair of handles of ‘EVERITE’ /Godrej or approved  make including cutting, making good etc complete.

Providing and fixing aluminum die cast body tubular type universal hydraulic door closer of HYPER/Godrej/Ebco (201-Basic model) make confirming to IS 3564 for aluminum doors weighing upto 65Kg with necessary accessories, fixtures, fittings, scews etc

Providing 5mm float glass of approved quality Modiguard/Saint Gobain/Triveni/Hindustan Pilkinston with putty to be fixed in existing window/partition framework, cutting to required sizes all wastages, etc.including raking out the old putty and removing the existing broken glass pane if any, providing neoprene/EPDM gaske whereever required as directed by Engineer-in Charge.

Providing 12 mm thick prelaminated (both sides) cement particle board of M/s. BISON or approved make confirming to IS 14276 of approved shade on both sides

Supply and fixing Fly proof stainless steel grade 304 wire gauge with 0.5 mm dia. wire mesh with 1.4mm wide aperture, fixing the mesh in door/windows with aluminium/UPVC beading, complete as directed by Engineer-in-charge.

Providing and fixing roller blinds of approved make as per the manufacturer's specifications with drive unit, end plug, support brackets, roller tube, bottom rail, ball chains. Drive unit to be of moulded plastic with straight rectangular support pin and inserted into the tube end. It shall be driven by a ball chain pulley and can be positioned at right or left side of the shade. The shade when lowering or raising shall automatically be lockable upon release of the ball chain by the means of friction lock. End plug shall be moulded by plastic locking pin. The plug shall be inserted into the tube end. Support brackets shall be of zinc plated steel and provided with moulded plastic cover and used in right and left hand position differentiated by the acceptance of the rectamgular drive unit support or the round idler plugin Roller tube shall be made out of roll formed steel with outer diameter 25mm. It should be suitably protected against corrosion, keyway integral with the tube to accomodate the spline. 

Providing and fixing at all heights sun control film of reflective type to the glass panes of windows. Manufactured by M/s. Gareware or its approved equivalent of required shade including cutting to required size, fixing the film without any wrinkles, removing any existing film, cleaning the glass along with   paints if any thoroughly on both sides complete as per manufacturers’ specifications and as directed by the Engineer-in-Charge.

Providing and fixing anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, including window frame for fixing of grill with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, all complete as per requirement and direction of Engineer-in-charge.

Demolishing cement concrete manually/ by mechanical means including disposal of material within anywhere in NFC for all leads as specified and directed.

Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within anywhere in NFC for all leads as per direction of Engineer - in- charge.

Dismantling very carefully the existing Brick masonry in cement mortar with plastering on both sides including wall tiles, old pipelines if any very carefully at all depths/heights above/below plinth level by suitable methods including erection of suitable scaffolding, stacing of useful materials and disposing the unserviceable debris within anywhere in NFC for all leads, etc., complete as specified and directed.

Dismantling existing wooden/Aluminum/ / M.S/PVC (or other material) doors, windows, ventilators etc., including shutters, frames, holdfasts etc very carefully without damaging the frame and shutter etc., disposing the unserviceable materials within anywhere in NFC for all leads, making good the damaged surface of opening after removal of door/window/ventilators etc, as directed by Engineer-in-Charge.

Dismantling the existing mosaic/ceramic tiles shahabad stone, etc., in flooring / dado including dismantling, bedding mortar and disposing the debris within anywhere in NFC for all leadsas directed by Engineer-in-Charge.

Removing carefully the damaged PVC flooring including cleaning the adhesive from the floors and disposing the debris and stacking at places within anywhere in NFC for all leads as directed by the Engineer-in-charge .

Removing the existing damaged false ceiling of all types, carefully removing of false roofing sheets, suspenders, cleats, existing light fittings, cables, if any., with all necessary scaffolding and stacking properly at a distance within anywhere in NFC for all leads as directed by the Engineer-in-charge

Dismantling old plaster, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within anywhere in NFC for all leads.

Shifting of furniture from rooms and placing it outside for the civil works to commence and again putting the furniture back into the rooom after the completion of work as per the directions of Engineer-in-charge. Note: Payment will be made per room basis.

Rebate for Taking away dismantled item by the contractor

a) MS/Wooden/Aluminium/Plastic Windows along with glass (Opening Size will be measured for payment)

b) MS/Wooden/Aluminium/Plastic Door shutters including door frames (Opening Size will be measured for payment)