Notified Area Committee Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
Refer Documents
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
528807Tender No
60/NAC/2024Tender Authority
Notified Area Committee ViewPurchaser Address
-Website
http://https://nacrgia.in/
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
Documents
BOQ Items
Solid waste management;Providing Water proof cement plastering 12 mm thick in single coats in cement mortar 1:3 to concrete or brick surfaces, in all positions including cost and conveyance of all materials, labour charges, scaffolding and curing complete.
55.2
242
13370.54
Solid waste management;Carting away the surplus excavated material i.e.Earth from the site to a suitable distance of about 5.00 Km including loading, unloading , conveyance charges and dumping the carted material at the contractors cost, labour charges, all leads & lifts and other incidental and operational charges etc., complete.
33.46
72
2429.2
Solid waste management;Providing external cement plastering 20 mm thick in 2 coats with cement mortar base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing to concrete or brick surfaces, in all positions including scaffolding, cost and conveyance of all materials, labour charges and curing etc complete.
55.2
563
31077.6
Solid waste management;Supplying, fitting and placing HYSD/ TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including material and labour cost.
1171.35
79
93462.02
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - Slab 150mm thick
1.35
12303
16609.29
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workfor Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - Walls
15.62
11669
182272.28
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workfor Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - Raft
3.04
11390
34627.39
Solid waste management;Plain Cement concrete (1:4:8) using 40 mm metal using cement concrete mixer upto Plinth level. Providing concrete for plain concrete upto plinth using 40 mm nominal size Graded hard stone aggregate, mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications including labour charges, cost and conveyance of all materials.
2.59
5583
14460.9
Solid waste management;Hard rock (blasting prohibited)-Up to 3 m depth: Excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.
21.18
2268
48041.75
Solid waste management;Underground Sump (25KL): Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308).Ordinary soils-Mechanical Means-Up to 3 m depth
31.77
127
4040.83
Solid waste management;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in T.G., F.O.R. destination including, loading, un-loading & stacking at site. I.S.I Mark - 24x24 MD 10
1
2433
2433.63
Solid waste management;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. apporved brand and shade over a base coat of of approved cement primer of Exterior Grade- 2 making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for External walls.
50.22
275
13840.13
Solid waste management;Providing external cement plastering 20 mm thick in 2 coats with cement mortar base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing to concrete or brick surfaces, in all positions including scaffolding, cost and conveyance of all materials, labour charges and curing etc complete.
50.22
563
28273.86
Solid waste management;Providing Water proof cement plastering 12 mm thick in single coats in cement mortar 1:3 to concrete or brick surfaces, in all positions including cost and conveyance of all materials, labour charges, scaffolding and curing complete.
64.12
242
15531.15
Solid waste management;Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not lessthan 75 kg/sqm for walls for Superstructure Walls.
5.18
7400
38333.24
Solid waste management;Carting away the surplus excavated material i.e.Earth from the site to a suitable distance of about 5.00 Km including loading, unloading , conveyance charges and dumping the carted material at the contractors cost, labour charges, all leads & lifts and other incidental and operational charges etc., complete.
47.31
72
3434.71
Solid waste management;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in T.G. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete
26
221
5760.3
Solid waste management;Supply and Fixing of PVC Water Stopper 310mm wide
51.2
521
26700.29
Solid waste management;Supplying, fitting and placing HYSD/ TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including material and labour cost.
1427.2
79
113876.29
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workfor Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - Wall
9.47
11669
110506.95
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workfor Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - Raft
4.8
11390
54674.83
Solid waste management;Plain Cement concrete (1:4:8) using 40 mm metal using cement concrete mixer upto Plinth level. Providing concrete for plain concrete upto plinth using 40 mm nominal size Graded hard stone aggregate, mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications including labour charges, cost and conveyance of all materials.
6.68
5583
37296.84
Solid waste management;Hard rock (blasting prohibited)-Up to 3 m depth: Excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.
42.28
2268
95902.03
Solid waste management;Leachate sump : Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308).Ordinary soils-Mechanical Means-Up to 3 m depth
28.19
127
3585.49
Solid waste management;Filling with with Quarry Rubbish in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.
13.81
494
6823.94
Solid waste management;Manufacture as per company?s standard specification supply and delivery of encapsulated plastic steps for man holes anywhere in T.G. including cost of materials packing as per company?s standards, loading, transportation, unloading and stacking at site of work etc, complete
6
221
1329.3
Solid waste management;Providing Water proof cement plastering 12 mm thick in single coats in cement mortar 1:3 to concrete or brick surfaces, in all positions including cost and conveyance of all materials, labour charges, scaffolding and curing complete.
20.7
242
5013.95
Solid waste management;Carting away the surplus excavated material i.e.Earth from the site to a suitable distance of about 5.00 Km including loading, unloading , conveyance charges and dumping the carted material at the contractors cost, labour charges, all leads & lifts and other incidental and operational charges etc., complete.
37.06
72
2690.56
Solid waste management;Providing external cement plastering 20 mm thick in 2 coats with cement mortar base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing to concrete or brick surfaces, in all positions including scaffolding, cost and conveyance of all materials, labour charges and curing etc complete.
20.7
563
11654.1
Solid waste management;Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not lessthan 75 kg/sqm for walls for Superstructure Walls.
10.42
7400
77110.5
Solid waste management;Supplying, fitting and placing HYSD/ TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including material and labour cost.
178.3
79
14226.56
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - RCC Walls
0.2
11669
2333.83
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of workfor Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - Slab upto 150 mm thk.
1.74
12303
21407.53
Solid waste management;Filling with sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work.
0.68
3156
2146.42
Solid waste management;Plain Cement concrete (1:4:8) using 40 mm metal using cement concrete mixer upto Plinth level. Providing concrete for plain concrete upto plinth using 40 mm nominal size Graded hard stone aggregate, mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications including labour charges, cost and conveyance of all materials.
2.11
5583
11780.89
Solid waste management;Hard rock (blasting prohibited)-Up to 3 m depth: Excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.
18.11
2268
41078.19
Solid waste management;Septic Tank & Soak Pit: Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308).Ordinary soils-Mechanical Means-Up to 3 m depth.
27.16
127
3454.48
Solid waste management;Supply and fixing premium make wall mirror with provision for overhead shower and 115 mm long bend pipe with wall flange and with 10 years warranty
4
6860
27440.28
Solid waste management;Supplying and fixing of Double Socket PVC/SWR pipe - 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with 3 Nos of PVC clips with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) - 110mm dia
8
325
2602.48
Solid waste management;Supplying and fixing of Double Socket PVC/SWR pipe - 4 Kg/Sq.cm. and fixing all specials such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with 3 Nos of PVC clips with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326) -75mm dia
16
193
3090.4
Solid waste management;Supplying and fixing BRONZE (COPPER ALLOY) Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. - 50mm Nominal bore
1
4622
4622.99
Solid waste management;Supplying and fixing BRONZE (COPPER ALLOY) Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. -32mm Nominal bore
2
2337
4674.12
Solid waste management;Supplying and fixing BRONZE (COPPER ALLOY) Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. - 25mm Nominal bore
2
1538
3076.7
Solid waste management;Supplying and fixing BRONZE (COPPER ALLOY) Gate/ Globe valve as per IS - 778 Class - I, Indian make heavy type including cost and conveyance of all materials, labour charges, overheads & contractors profit complete for finished item of work. - 20mm Nominal bore
3
1070
3210.75
Solid waste management;Supplying & fixing Ashirvad/Astral flow guard for equivalent CPVC Pipes with fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work. - 54 mm dia CPVC SDR 11
2
698
1397.46
Solid waste management;Supplying & fixing Ashirvad/Astral flow guard for equivalent CPVC Pipes with fittings in ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils except rock requiring blasting, refilling, chiselling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on TW blocks on walls including cost and conveyance of all materials and labour charges complete for finished item of work. - 41.30 mm dia CPVC SDR 11
3
479
1438.38
Solid waste management;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. - 54 mm dia CPVC SDR 11
30
698
20961.9
Solid waste management;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. - 28.60mm OD pipe
10
284
2840.4
Solid waste management;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. - 22.20mm OD pipe
20
237
4749.2
Solid waste management;Supply and fixing of Ashirvad/ Ajay/ Astral Flowguard or equivalent CPVC Pipes and Fittings SDR 11 to meet the requirement of ASTM-D 2846 and are produced in CTS (Copper Tube Sizes 1/2" to 2") for hot and cold water (IS 15778:2007) including cost and conveyance of all materials to site, labour charges for fixing, overheads & contractors profit complete for finished item of work at all floor levels. - 15.90mm OD pipe
35
196
6879.25
Solid waste management;Supplying and fixing of 101.60mm x 609.60mm white glazed porcelain channels 1st quality fixed in brick masonry to the required slopes, white cement pointing including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work for all floors.
2
1012
2024.04
Solid waste management;Supplying and fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm with integral flushing rim fixed with screws complete Indian make (HSW/Parry/Neycer) conforming to IS:2556-1995 as approved by Engineer-in-charge, including supply and fixing 12.7mm PVC connection with brass plumber union nuts CP coated, 12.70mm push cock 1st quality of approved make , 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality including cost and conveyance of all materials to site, labour charges etc., overheads & contractors profit complete for finished item of work for all floors.
2
4484
8968.76
Solid waste management;Supply & fixing of Chromium plated finish brass body quarter turn Bibcock cum Health Faucet with 1m long tube and wall hook with 10 years warranty necessary fittings etc., complete including cost and conveyance of all materials, labour charges, overheads & contractor profit complete for finished item of work in all floors.
3
4003
12011.37
Solid waste management;Supplying and fixing of 15 mm brass body CP finish two-way bib tap of not less than 400 grams weight with quarter turn spindle internal/ external threaded connection conforming to IS 8931 of Indian make heavy duty (short body) as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors. - 400 gms
8
1067
8543.84
Solid waste management;Supplying and fixing of 20mm dia , 609.6mm long CP towel rods with brackets and aluminium screws including cost and conveyance of all materials, labour charges etc., complete for finished item of work.
2
496
993
Solid waste management;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm, plywood back with NP screws 1st quality including cost and conveyance of all materials, labour charges, overheads & contractors profit for finished item of work in all floors.
2
640
1281.58
Solid waste management;Supplying and fixing CP finish brass soap dish heavy type of approved make ISI quality with screws etc., complete including cost and conveyance of all materials, labour charges for fixing etc., complete for finished item of work in all floors as per ssr item no 598
6
707
4246.92
Solid waste management;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 550 x 400 mm - Double C.P. Pillar cock including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work
3
3047
9141.45
Solid waste management;Supply, Installation and commissioning approved make floor mounted Anglo Indian wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc complete for finished item of work in all respects:White Colour
3
7007
21023.31
Solid waste management;Supplying and fixing of 4" (101.6mm) multi floor trap with jali - UPVC/SWR pipe fittings as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
8
194
1554.24
Solid waste management;Supplying & fixing 150 mm x 100 mm SWG gully traps conforming to ISI 651 & 4127 with C.I Grating & Cost. Brick masonry in CM 1:6 prop. Intermediate chamber and fitted with 304.8 mm x 288.6mm (12"x9") C.I Frame and hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
4
850
3403.92
Solid waste management;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
6
5237
31425.9
Solid waste management;Plumbing works: Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 1524 mm(5'0") depth and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges, overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318) - 152.40mm dia upto 1524.0mm (5') depth
30
974
29244.6
Solid waste management;Providing and Placing on Terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work.
2000
11
22720
Solid waste management;PVC 110mm dia (Rain Water drain Pipe): Supply and fixing of PVC rain water pipe of 110 mm dia of 6kg/cm2 including cost of all material and necessary accessories and labour charges for laying, fixing and commissioning the PVC pipes etc., complete for finished item.
3.45
411
1421.3
Solid waste management;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
9
7746
69716.43
Solid waste management;Providing and fixing 30mm thick FACTORY MADE BOTHSIDE PRELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made from MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded Prelam Pac ?C? channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and 20mm shall be tapered in 450 angle on either side forming stile; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottom rail. Paneling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/ sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ?C? channel using Pac solvent cement adhesive etc. complete as per direction of Engineer ? in-charge, manufacture specification and drawing.
13.86
2974
41225.74
Solid waste management;Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fibre), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibres (wood powder) and nontoxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer -in- Charge.
4.2
2429
10202.18
Solid waste management;White washing two coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work.
80.99
49
4025.2
Solid waste management;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. apporved brand and shade over a base coat of of approved cement primer of Exterior Grade- 2 making making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for External walls.
170.95
275
47112.11
Solid waste management;Painting to new walls with 2 coats of Supply of acrylic emulsion paint interior grade having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. of approved brand and shade over water-based Cement Primer of Interior Grade- 1 of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911 for internal walls.
168.74
199
33694
Solid waste management;Providing Water proof cement plastering 12 mm thick in single coats in cement mortar 1:3 to concrete or brick surfaces, in all positions including cost and conveyance of all materials, labour charges, scaffolding and curing complete.
76.07
242
18425.68
Solid waste management;Providing Dadooing to internal walls to 15 cm height/risers of steps with glazed red or white full body ceramic tiles 7.30 mm thick length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete for finished item of work including the cost of conveyance of all materials.
104.98
622
65297.56
Solid waste management;Flooring with glazed red or white full body ceramic tiles for external cladding purposes of any size and thickness between 10-12 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.
15.36
1244
19120.13
Solid waste management;Flooring with digital / polished glazed full body porcelain vitrified tiles with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc., scratch less, stain free and of size 900 x 900 mm and thickness between 9-11 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs +, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete for finished item of work.
38.3
1600
61312.17
Solid waste management;Filling with Borrowed Soil earth: Filling with Borrowed Soil earth obtained from airport premises in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
16.17
185
3003.74
Solid waste management;Providing cement plastering 12 mm thick for ceilings in a single coat in cement mortar 1:4 to concrete or brick surfaces, in all positions including cost and conveyance of all materials, labour charges, scaffolding and curing complete.
80.99
205
16676.65
Solid waste management;Providing external cement plastering 20 mm thick in 2 coats with cement mortar base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponze finishing to concrete or brick surfaces, in all positions including scaffolding, cost and conveyance of all materials, labour charges and curing etc complete.
170.95
563
96244.85
Solid waste management;Providing Internal cement plastering 12 mm thick in 2 coats with cement mortar base coat in CM (1:5), 8mm thick and top coat in CM (1:3), 4mm thick with Dubara sponze finishing to concrete or brick surfaces, in all positions including scaffolding charges, cost and conveyance of all materials, labour charges and curing etc complete.
168.74
536
90550.95
Solid waste management;11.5 cm wide Brick masonry for super-structure on ground floor in cm (1:3) using second class traditional size bricks including cost of all materials, labour and all operations for constructing half brick masonry, mixing cement mortar, curing etc., complete for finished item of work.
67.7
1022
69241.53
Solid waste management;Brick Masonry work in CM (1:6) prop with Flyash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compresive strength not lessthan 75 kg/sqm for walls for Superstructure Walls.
16.62
7400
122991.99
Solid waste management;Supplying, fitting and placing HYSD/ TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including material and labour cost.
2073.04
79
165407.86
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work.- Lintels
0.76
14971
11378.07
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work.- Ramps
2.52
11390
28704.29
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work.- Slab upto 125 mm thk.
9.51
13220
125727.72
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work.- Roof Beams
3.11
13781
42860.81
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work.- Columns
2.19
14996
32842.03
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work.- Plinth Beam
4.01
14396
57728.6
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work.- Pedestals
0.96
12086
11602.91
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates,etc., finished item of work. - Footings
4.32
11390
49207.35
Solid waste management;Construction of Coursed Rubble stone Masonary in CM (1:6) 2nd Sort with hard stone in foundation, plinth & super structure (upto +2.10m level) including cost of all materials, labour and all operations for constructing masonry, mixing cement mortar, curing etc., complete for finished item of work.
8.75
5760
50401.05
Solid waste management;Plain Cement concrete (1:4:8) using 40 mm metal using cement concrete mixer upto Plinth level. Providing concrete for plain concrete upto plinth using 40 mm nominal size Graded hard stone aggregate, mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications including labour charges, cost and conveyance of all materials.
11.19
5583
62477.8
Solid waste management;Hard rock (blasting prohibited)-Up to 3 m depth: Excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.
34.4
2268
78028.14
Solid waste management;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308).Ordinary soils-Mechanical Means-Up to 3 m depth
8.6
127
1093.83
Solid waste management;Workers Rest Room & Canteen Clearing jungle including uprooting of rank vegetation ,grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.
84.1
38
3249.62
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.
412.5
9916
4090387.12
Solid waste management;Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu-Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colors. The sheets are provided with anti-capillary grove including Turbo Vents, Gutters, sky light, sheeted louvers, down sprout pipes and other miscellaneous items as per the design.
4133.37
511
2113268.08
Solid waste management;Structural steel work in MS angles, flats, channel and I Section etc., at all levels below / above ground level including supplying steel sections / plate conforming to IS 2062 transporting, cutting, fabricating using welding / bolts, weld rods and / or bolts and nuts from approved source, erecting using derecks / pulley or any suitable means, fixing in position and painting with one coat of approved red oxide zinc chromate primer and two coats of enamel paint of approved shade for all exposed surfaces, making necessary opening in the A. C. cladding for fixing the lateral structural steel supports including clearing the debris generated, by mechanical means of transport up to a lead of 2 Km. complete as directed by Engineer-in-Charge. The Structural Design steel to be restricted to 25 kg/sqm. The contractor should provide designs of PEB structure including foundation before execution of work and as per the instructions of Engineer-in-charge and the same to be approved by ENC(PH).
64.1
109070
6991412.64
Solid waste management;Painting to new walls with 2 coats of acrylic emulsion paint exterior grade with silicon additives having VOC (Volatile Organic Compound) content less than 30 grams/ Lit. approved brand and shade over a base coat of approved cement primer of Exterior Grade- 2 making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912 for External walls
1388.18
275
382568.53
Solid waste management;Providing Water proof cement plastering 12 mm thick in single coats in cement mortar 1:3 to concrete or brick surfaces, in all positions including cost and conveyance of all materials, labour charges, scaffolding and curing complete.
535.7
242
129757.25
Solid waste management;Filling with Borrowed Soil earth: Filling with Borrowed Soil earth obtained from airport premises in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)
2083.53
185
387036.53
Solid waste management;Providing external cement plastering 20 mm thick in 2 coats with cement mortar base coat in CM (1:6), 16mm thick and top coat in CM (1:4), 4mm thick with Dubara sponge finishing to concrete or brick surfaces, in all positions including scaffolding, cost and conveyance of all materials, labour charges and curing etc complete.
1388.18
563
781545.34
Solid waste management;Brick Masonry work in CM (1:6) prop with Fly Ash Cement solid blocks of size 290 x 225 x 140 mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs. Gypsum of 5 kgs. and stone dust including cost and conveyance of all materials, labour charges, scaffolding and curing etc., complete with a compressive strength not less than 75 kg/sqm for walls for Superstructure Walls.
93.25
7400
690072.38
Solid waste management;Supplying, fitting and placing HYSD/ TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded including material and labour cost.
19627.5
79
1566078.23
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., finished item of work. - RCC SLABS
6.95
16890
117386.89
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., finished item of work. - Ramps
43.07
11390
490592.71
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., finished item of work. - RCC Walls
35.11
11669
409704.21
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., finished item of work. - Columns
7.68
14996
115172.04
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., finished item of work. - PEDESTALS (Below Plinth)
8.64
12086
104426.15
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., finished item of work.- PLINTH
10.02
14396
144249.52
Solid waste management;Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and Supply and placing of RCC M25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work for Unsupported Height up to 3.66 M using Steel scaffolding pipes, jack Props, Wallers, Foot plates, brackets, steel Centering Plates, etc., finished item of work.-FOUNDATIONS
166.49
11390
1896419.33
Solid waste management;Construction of Coursed Rubble stone Masonry in CM (1:6) 2nd Sort with hard stone in foundation, plinth & super structure (upto +2.10m level) including cost of all materials, labour and all operations for constructing masonry, mixing cement mortar, curing etc., complete for finished item of work.
38.11
5760
219518.17
Solid waste management;Plain Cement concrete (1:4:8) using 40 mm metal using cement concrete mixer upto Plinth level. Providing concrete for plain concrete upto plinth using 40 mm nominal size Graded hard stone aggregate, mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications including labour charges, cost and conveyance of all materials.
268.51
5583
1499187.99
Solid waste management;Hard rock (blasting prohibited)-Up to 3 m depth: Excavation in hard rock (blasting prohibited) with rock breakers including breaking rock, depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work.
702.12
2268
1592590.71
Solid waste management;Compost Plant: Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work as per SS - 20 B (APSS 308). Ordinary soils-Mechanical Means-Up to 3 m depth.
300.91
127
38272.74
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements