Nizams Institute Of Medical Sciences Tender

BOQ;Supply and fixing of BPC Flow meter with Humidifier bottle and probe near outlet point, flow meter body made of brass material and should be back pressure compensated suitable for accurate gas flow measurement and control within a range of 0-15 liters per minute, flow tube and components should be made of clear impact resistant polycarbonate and humidifier should have built in safety valve and should be made of unbreakable polycarbonate material and autoclavable at 134 degrees centigrade, including cost and conveyance of materials, erection charges, commissioning charges ect. for finished item of work

BOQ;Bed Head Panel: The Bed Head Panel should have provision for Medical Gas Outlets points as per requirement and Nurse call system it should be equipped with electrical switch, socket of 16 Amp, socket for 2+2 (make: legrand arteor)

BOQ;Gas Outlets (Indigenous) double lock with Probe Vaccum

BOQ;Gas Outlets (Indigenous) double lock with Probe Medical Air - 4

BOQ;Gas Outlets (Indigenous) double lock with Probe Oxygen

BOQ;Supply and fixing of Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc.Hg Vacuum / Oxygen , Non Ferrous, non Lubricated with 90 degrees turn, Hand lever operated of standard make of valve including cost and conveyance of all materials, taxes, transportation charges, fixing charges and testing charges and all labour charges ect. Complete for finished item of work. 15 mm (1/2")

BOQ;Supply and fixing of Isolation Valves with necessary end fittings designed for a working pressure of 300 psi / 27 inc.Hg Vacuum / Oxygen , Non Ferrous, non Lubricated with 90 degrees turn, Hand lever operated of standard make of valve including cost and conveyance of all materials, taxes, transportation charges, fixing charges and testing charges and all labour charges ect. Complete for finished item of work. 22 mm (3/4")

BOQ;Supply and fixing of Medical grade Copper Pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipe conforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufacturers test certificate for the physical properties & chemical composition. Copper pipes should also have third party inspection certificate from Lloyds; register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, Painting, commissioning and all other labour charges ect. Complete for finished item of work. 12mm OD x 0.7 mm thick Copper pipe

BOQ;Supply and fixing of Medical grade Copper Pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipe conforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufacturers test certificate for the physical properties & chemical composition. Copper pipes should also have third party inspection certificate from Lloyds; register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, Painting, commissioning and all other labour charges ect. Complete for finished item of work. 15mm OD x 0.9 mm thick Copper pipe

BOQ;Supply and fixing of Medical grade Copper Pipes shall be Solid drawn, seamless, deoxidezed, non-arsenical, half hard, tempered and degreased copper pipe conforming to EN 13348. All copper pipes should be degreased & delivered capped at both ends. The pipes should be accompanied with manufacturers test certificate for the physical properties & chemical composition. Copper pipes should also have third party inspection certificate from Lloyds; register services including cost and conveyance of pipes, cost of necessary specials made of copper and suitable for a steam working pressure of 17 bar and should confirm to BS 864 with specially made for brazed socket type connections, including taxes, transportation charges including laying and jointing, testing, Painting, commissioning and all other labour charges ect. Complete for finished item of work. 22mm OD x 0.9 mm thick Copper pipe