Nalsar University Of Law Tender
For getting the details of etenders, if you are looking for information about them from the cumbersome government websites but are tired of doing so, Bidassist comes up with a one stop solution. It collates every Eproc telangana tender on Bidassist. One can approach it for the bidding process, registration process, etc., are explained below.
Costs
EMD
Refer DocumentsDocument Cost
Refer DocumentsTender Fee
₹ 2,500
Description
Scription for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user this is tender description for unregistered user
Contact
Tender Id
193479Bid Award Id
ViewTender No
NIT. No.01/Construction of Primary Health Centre G plus 2 Floors / NALSAR/2020-21 Dt: 10/09/2020Tender Authority
Nalsar University Of Law ViewPurchaser Address
-Website
http://tender.telangana.gov.in
GEM & Bid Advisory Services
Get portal registration, tender bidding, product/service listing or vendor/MSME certification services at a nominal cost
BOQ Items
WORKS;Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete-Makes : Cease Fire / Minimax
10
-
92709.84
WORKS;Supply and fixing of 12V 65 AH SMF battery including wire leads. Makes : Quanta / Racket / Exide.
16
-
127248.8
WORKS;-Supply, Transportation and installation of following true on line UPS system IGBT technology pure sine wave out put, double conversion with auto and manual static by pass switch single phase input / Single phase output. Makes: Power one / Numeric / Emerson.7.5KVA, 180/192VDC
1
-
90664.77
WORKS;Supply and fixing of stainless steel water cooler with 80 L storage capacity with 2no of Taps,40L/Hr cooling capacity,power consumption of 750W,dimensions 665x480x1210mm of 47KGS weight including all accessories etc complete with one year warranty Make : Blue star SDLX 480 or Equivalent
1
-
36850
WORKS;Supply and fixing of Electrical & Non ? Storage type water purifier(Electrical purification) suitable for direct water supply with following features complete with all accessories etc. Make : Aquaguard AG200 or Equivalent Application :Suitable for Electrical Purification of Municipal Corporation Water,purifies microbes levels Installations :Suitable as attachment with water coolers Purification capacity : 200L Filtration Capacity : 200L/hr Installation type : Wall mount Purification Stage : 3 Water flow rate : 200L/min Purifying Technology : UV Power Requirement : 220-240V-50Hz Power Consumption : 35 W Electrical type : Electric Auto start/Shut off : YES Overflow Protection : YES Filter Life : 10000 L Dimensions : 25cmx30cmx10cm Weight : 2 KG
1
-
11539
WORKS;Supply, Transportation, Installation, Testing and commissioning of storage / Pressure type Vertical / Horizontal 230/250V single phase 2000watts ISI mark 5 Star rated water heater with ABS plastic body of 25 ltrs capacity to withstand up to 8.0 bar of water pressure including all standard accessories and dead weight pressure reducing valve on out let side, including cost of 2 Nos SS flexible braided hose pipe, testing and all labour charges etc., complete. Makes : Crompton Solarium BLX / Jaquar Elena / Venus Lyra / Racold Eterno Swift / Racold Andris Lux Plus / AO Smith HSE SDS / AO Smith HSE SES / Havells Puro Turbo
10
-
124976.5
WORKS;2.0 / 1.8 TR 5 Star capable of delivering 21600 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes : Daikin / Toshibha / Carrier / Blue Star / Hitachi
5
-
303000
WORKS;Supply and Transportation of of INVERTER Model Cool type split AC unit with high wall mounted Single Split 100% copper indoor and outdoor condencing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing Heat cool dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 4 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with 2 years warranty and annual maintenance contract.-1.5 TR 5 Star capable of delivering 18000 BTU/hr and above with operating on refrigerant R-32 / R-410 Makes : Daikin / Toshibha / Carrier / Blue Star / Hitachi
5
-
238000
WORKS;Supply of 3 Core following Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / Nakoda / KEI / L&T-4.0 Sqmm
100
-
15452
WORKS;Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.
1
-
7953.05
WORKS;Supply and Transportation of star rated following Three phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi-3.00 HP 5-10 Stage
1
-
34538.96
WORKS;Supply & Fixing of 4.5Kg, CO2 Type Fire Extinguisher, Trolley Mounted, Easy Weight Management, Used Unused Mechanism, Squeeze Grip, Gross Weight 19.1 Kg, Empty Weight 14.6 Kg, Can Height 860MM, Diameter 140MM, Discharge time minimum 13 Secs, Controllable discharge mechanism, Range minimum 2 Meters, Applicable on Class B,C & electrically started Fire, B Rating 13B, Can Construction : Hot Spinning / Forging, Valve Construction : Forging & Machining, Internal Coating of Can : Not Applicable, External Coating of Can : Spray Painting, Sheet metal thickness : 4.5MM, ISI & CE Approved, 2 Year Warranty Including transportation, all taxes and all labour charges etc complete. Makes : Cease Fire / Minimax
1
-
11020.66
WORKS;Supply and fixing of 2 Kg Fire exitinguisher Clean Agent HCFC 123, Stored pressure type, IS 15683 : 2006 pressure guage, gross weight 3.7 Kg empty weight 1.7 Kg, can hight 344mm, Diameter 108mm, discharge time minimum 8 secs, controllable discharge mechanism, range minimum 2 meters, applicable on class A,B,C and electrically started Fire, A rating 1A, B rating 21B, can construction: Deep drawn & CO2 mig welded, Valve construction: Forging & Machining, Internal coating of Can: Epoxy powder coating, External coating of can: Epoxy polyster powder coating, sheet metal thickness: 1.60 mm, Helium leak detection tested, ISI & CE approved, 5 Years warranty. Makes : Cease Fire / Minimax
1
-
13088.45
WORKS;Supply and fixing of ABC stored pressure squeeze grip type fire extinguishers, 9 kg capacity, IS:15683 : 2006, filled with ABC Mono Ammonium Phosphate base powder-90 complete with discharge hose and wall mounting bracket, 2mm Mild Steel, EPDM Rubbers, Pressure Guage, which work effectively on all class of fires (A, B, C & Electrical fires) with 5 years warranty Including transportation, all taxes and all labour charges etc complete. Makes : Cease Fire / Minimax
1
-
9270.98
WORKS;Supply and fixing of TV outlet Modular type in existing MS / modular box with modular front cover plate with screws connections etc., complete. Makes : Legrand Arteor / Schneider Zen celo / Honeywell Blenge Plus / Cabtree Amare / Logus Platina
6
-
1638.42
WORKS;Supply and laying of RG6 co-axial cable in the existing metallic/non metallic conduit pipe with connections etc.,complete for TVs Makes: Finolex/ Million / Gold Medal / Polycab
300
-
8595
WORKS;Supply and Installation of 150mm x 50mm x 2mm thick GI perforated cable tray with cover along with required angle supports, with coupler plates, Anchor bolts and nuts etc complete and the tray should be fitted on the wall / Ceiling etc. Complete.
20
-
9316.4
WORKS;Supply and Transportation of Outer dia 120mm and Inner dia 103.50mm double walled corrugated HDPE duct made as per specification BSEN - 500 86/IS 14930 Part-II with all accessories like couplers, bends, end caps, Ts etc., complete. Makes: DURA LINE (Dura Guard) / Bajaj / Gamson /Ultra Plus
15
-
4039.05
WORKS;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for UG cables of 3.5 core 50 Sq.mm including with required cable glands, Lugs complete with all required accessories as directed by the department including cost and conveyance of all materials and labour charges etc., complete. Makes of glands: SMI / Commet / Dowels. Makes of Lugs: DMI / Jainson / Dowels
2
-
645.34
WORKS;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outer sheath sealing rubber ring and washers suitable for UG cables of 3.5 core 185 Sq.mm including with required cable glands, Lugs complete with all required accessories as directed by the department including cost and conveyance of all materials and labour charges etc., complete. Makes of glands: SMI / Commet / Dowels. Makes of Lugs: DMI / Jainson / Dowels
2
-
1733.76
WORKS;Labour charges for run of U.G cable on wall / existing pipe with necessary fixing arrangments such as saddles, clamps, wooden separators etc., (as directed by departmental official) for eath connections for the cables.
60
-
2564.4
WORKS;Earth work excavation of Trench in hard ground soil and Sand filling shall be provided at the bottom of trench before laying the cable and laying of U.G cables up to 70 sqmm covering the cable with back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.
60
-
12816
WORKS;Supply of following XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon-50 Sqmm 3.5 Core
40
-
14815.2
WORKS;Supply of following XLPE insulated, 1100V grade armoured alluminium cable with ISI mark as per specification confirming to IS:7098 (Part - I) Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex / Paragon-185 Sqmm 3.5 Core
80
-
84802.4
WORKS;Supply and laying of LAN cable Cat-6(A) UTP CABLE in the existing metallic/non metallic conduit pipe with connections etc.,complete Makes:D Link/ AMP / Molex / Legrand / Krone
180
-
5976
WORKS;Supply and fixing of cat-6 RJ-45information outlets including dual face plate with MS box with modular plate cover with screws connections etc., (Makes : D Link / AMP / Molex / Legrand / Krone.)
9
-
4482.27
WORKS;Supply anf fixing of 10 pair Telephone distribution box with back mount frame, krone connector, powder coated metal body with lock and key arrangement. Make:Krone
1
-
835.35
WORKS;Supply, Transportation and Run of 1 of 10 Pair, telephone copper wire in the existing cable tray/ conduit pipe and labour charges etc., complete. Makes : Finolex / Delton / Surabi / Polycab.
50
-
2606
WORKS;Supply and laying of 2 pair telephone wire in the existing metallic/non metallic conduit pipe with connections etc.,complete Makes : Finolex / Delton / Surabi / Polycab
240
-
4723.2
WORKS;Supply and fixing of telephone jack type socket with top on MS box with modular plate cover with screws connections etc., Makes : GM G Home / Gold Medal Olive / Million Zoom /Anchor Penta Cherry / Great white Omega / HPL
12
-
2418
WORKS;Supply and transportation of 43 / 45 W LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>80, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with warranty 50,000 burning hours. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA /
10
-
53399.1
WORKS;Supply and fixing of louver shutter suitable for 9" Exhaust fan including all labour charges etc complete with connections and colouring matching to the wall with enamel paint.
28
-
6123.88
WORKS;Labour charges for fixing of Exhaust fan in wall with necessary connections and masonary work of making hole, finishing etc., complete
28
-
8683.08
WORKS;Supply of 12" (300mm), 900 RPM Heavy duty exhaust fan with metallic blades. Makes : Crompton / Almonard / Havells Turbo Force SP.
14
-
45014.2
WORKS;Supply,Transportation of light duty exhaust fan 9"(225 mm) size 900 rpm with metal blades wiremesh with all accessories etc complete. Makes : Crompton / Bajaj Bahar WG / Havells Ventil Air-DS / Orient hill air.
14
-
20518.82
WORKS;Supply and erecting 19/20mm steel tube down rod of one meter length with bolts & nuts duly painted with matching colour of fan complete.
60
-
7833
WORKS;Labour charges for Fixing of Ceiling fan and regulator including transportation and giving connections with twin core wire etc., complete.(Makes : FFinolex / RR Kabel / Havells / Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab
60
-
9586.2
WORKS;Supply of modular Electronic stept type fan regulator hum free step type socket size with MS box, front plate in the existing switch board ( Modular Type ) Makes : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana.
60
-
24881.4
WORKS;Supply of 48" (1200mm) 5 star rated Sweep ISI mark Ceiling Fan as per IS 374 - 1979 and, with double ball bearings but without Regulator. with all standard accessories. Makes : Crompton HS Plus / Havells ES NEO / Orient Energy Star
60
-
142813.8
WORKS;Supply and fixing of Electronic Music bell on 6"x8" decolam block including giving connections, cost of all accessories and labour charges etc., complete. Makes : GM / Million / Gold Medal / Anchor / Greatwhite.
2
-
745.7
WORKS;Supply and fixing of Ding dong bell on 6"x8" decolam block including giving connections, cost of all accessories and labour charges etc., complete. Makes : GM / Million / Gold Medal / Anchor / Great White.
2
-
461.66
WORKS;Supply and fixing of buzzer on 4"x4" decolam block including giving connections, cost of all accessories and labour charges etc., complete Makes : GM / Million / Gold Medal / Anchor / Great White.
2
-
279.88
WORKS;Supply and fixing of ISI mark batten holder / slanting holder Makes : Anchor / Gold Medal Olive / Million Zoom in lieu of ceiling rose of light point complete with all connections and all labour charges with 5.0W LED Lamp. Makes of holder : GM G Home / Gold Medal Olive / Million Zoom / Anchor Penta Cherry / Great white Omega / HPL / Vimal/ CPL. Makes of Light : Phillips / OSRAM / Crompton / Eveready / Bajaj / Havells / Pharox / Halonix / Greenlites / IB LED/ Jaquar / C&S / GM / Gold Medal / Million / Syska.
62
-
12028
WORKS;Supply,transportation and fixing of 20W, 2000 lumens, T8,1200mm length LED retro tube light,wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty. LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton / VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.
125
-
118415
WORKS;Supply and Run of No.8 SWG G.I wire including cost of all accessories and labour charges etc., complete.
100
-
1891
WORKS;Supply and Run of 25mm x 3mm copper strip (Cuurrent Carrying Capacity 270A) including cost of all accessories and labour charges etc., complete. (0.663Kgs/1Mtr)
15
-
7019.25
WORKS;Supply and Run of 25mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete. (1.18Kgs/1Mtr)
40
-
4426.4
WORKS;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia 'B' Class G.I Pipe of 2.5Mtr length as per National Electric Code and earth connection from electrode Copper strip of 25mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to Copper strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder and providing 18" dia 18" height 3" thick hume pipe ring covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II).
2
-
23392.3
WORKS;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 40 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)
2
-
9985.74
WORKS;Supply installation testing and commissioning of 3 phase and neutral 415V free standing floor mounted indoor main LT panel made out of No.16 gauge CRCA sheet steel after 7 tank process and painting with powder coating. The panel shall consists of suitable rating TPN Alluminium busbar ( with rating of 0.8A/ Sqmm)supported with DMC /SMC barriers and colour coaded with heat shrinkable sleeves, flexibiltioy to accept the up four out going cables and necessary cable chamber . The panel shall have comprised of following switch gear . Including supply and fixing the same and painting with powder coating including internal connections cost and conveyance of all materials & labour charges. Incommer: 250A 4 Pole MCCB,36 KA. - 1Nos Makes: L&T/Schneider/Legrand/ Siemens Outgoing:- 125A TP, MCCB, 25 KA - 2 Nos Makes: L&T/Schneider/Legrand/ Siemens 63A TP, MCCB, 16 KA - 4 Nos Makes: L&T/Schneider/Legrand/ Siemens 63A, TP, MCB, 10 KA - 6 Nos 40A, TP, MCB, 10 KA - 6 Nos Metering Set: 0-500V Digital type voltmeter -1 No.(Make:Conzerve/Elmeasure/Meco/HPL/L&T/socomec) 0-100 / 200 / 400 / 600 /1000 - 5A CT Digital Ammeter? 1 No. ( Make:Conzerve/Elmeasure/Meco/HPL/L&T/socomec) Analog selector switch for voltmeter / Ammeter - 2 No.(Make: L&T /C&S/SALZER/HPL) R, Y, B Indication lamps of LED type - 3 Nos. Analog LT current transformer with bar primary 100/5A to 1000 / 5A ratio - 3 Nos( Make:Kappa/L&T/Seimens/C&S/Schneider) Bus bar arrangement with insulators Hard ware Control wiring with flexible wires and MCBs and suitable TVSS set with 02no of NO/NC contacts,ELR relay provisions. Labour charges,contractor profit & overheads etc complete with connections for Finished item of work.
1
-
200000
WORKS;Supply and Installation of 63 Amps FP, MCCB, 25KA with cable end boxes on suitable angle iron frame work for the areas mentioned in the drawings including all Labours charges massonry work etc complete with connections. Makes : L&T / Schneider / Siemens / Legrand / Hager / ABB / C&S.
1
-
10014.59
WORKS;Supply and fixing 12way SPN Distribution board with IP-42 protection (Metal Door) suitable for single phase ELCB / RCCB/DP Isolator as incomer and 10kA SP MCBs as outing going including internal connection and labour charges for surface / flush mounting etc., Complete. Makes : Legrand / Schneider / Siemens / L&T / Cabtree Xpro.
5
-
28702
WORKS;Supply and fixing 8 Way TPN - Vertical type Distribution board with IP -43 Protection with 125A, 4 Pole 25 kA MCCB as incomer with 8Nos 63A TP MCBs and 0 Nos. 10 kA SPMCBs as outgoing including internal connection and labour charges for flush mounting etc. Make: Legrand / Schneider/Seimens/L&T
1
-
39386.91
WORKS;Supply and fixing of 3-ph, 6way horizontal TPN Distribution board with IP-43 protection (Metal Door) as per IS:13032 with - 1 No 40-63A 10 KA C/D Curve FP MCB for incomer and 18Nos 10kA 6-32A C/D Curve SP MCBs - for outgoing. including internal connection and labour charges for surface / flush mounting etc., complete.(For LDBs & PDBs) Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&TExora / Cabtree.
7
-
92951.25
WORKS;Supply and fixing single phase DB in sheet steel enclosure with metalic plug and socket with 1 No. 20/32A,10KA 'c' curve SPMCB (Motor characteristics MCBs) control including making connections etc., complete concealing in wall. Makes: Legrand(Ekinox 3) / Schneider-Acti9/Hager - Novello+/ Seimens/Crabtree Xpro classique-II/L&T-Newrange/Indo Asian-Opti Pro.
11
-
24648.47
WORKS;Supply and run of 6 of 10 Sq mm (phases, neutral and two earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits including labour charges etc. complete as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for PDBs] Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
120
-
81986.4
WORKS;Supply and run of 6 of 6 Sq mm (phases, neutral and two earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for circuits including labour charges etc. complete as required for run of mains from Lighting panel board to TPN DB'S with pin type lugs and connections. [for LDBs] Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
200
-
94380
WORKS;Supply & run of 3 of 6.0 Sqmm (84/0.3mm) (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for run of mains including labour charges etc. complete for AC points & SDB's etc as required Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
900
-
212355
WORKS;Supply and 3 runs of 4.0 sq mm (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing conduit pipe for run of mains including labour charges etc., complete as required including labour charges for 16A sockets. Makes of Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
1500
-
252945
WORKS;Supply and run of 3 of 2.5 sq.mm (phase neutral and earth) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing MS conduit pipe for individual ligting circuits including labour charges etc., complete as required for switch boards. Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
2000
-
222360
WORKS;Supply and run of 3 of 1.5 sq.mm (36/0.mm) (phase, neutral and earth) FRLS / HFFR PVC insulated flexible copper cable in existing conduit pipe for individual lighting circuits including labour charges etc., complete as required for small switch boards(corridors,Lobby,Toilets). Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
500
-
39655
WORKS;Supply and run of 1 of 22 /0.3mm (1.5 Sq.mm) FRLS / HFFR / ZHFR P.V.C. insulated 1100V grade as per IS : 694 / 1990 specification flexible copper cable in existing pipe for earth continuity including all labour charges etc., complete. Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR)
1200
-
31728
WORKS;Supply & fixing of 20A, 2 in one socket with 20A switch control modular type with and GI switch box with front cover plate including all labour charges etc., complete. Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
11
-
4867.83
WORKS;Supply and Fixing of 16A/6A modular type power out let6s with front cover plates with following configurations 1) 16A Socket - 1 nos. 2) 16A Switch - 1nos. 3) 6A socket - 3nos.. 4) 6A Switch - 3nos. Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
8
-
9877.68
WORKS;Supply and Fixing of 6A modular type power outlets with front cover plates on 12 Module metal switch box with following configurations. 1) 6A socket - 4 No 2) 6A switches - 4 No ( For use for computer switch boards) Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
6
-
7006.08
WORKS;Supply & fixing of 16A/6A, 2 in one socket with 16A switch control modular type with and GI switch box with front cover plate including all labour charges etc., complete. Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
30
-
14605.5
WORKS;Supply and fixing of 6A switchs - 2 Nos and 6A 3/2 pin socket - 2 Nos Modular type with cover plate and GI switch box fixing on separate board including all labour charges etc., complete. Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
26
-
16267.42
WORKS;Wiring with 3 of 22/0.3mm (1.5 Sq.mm) P.V.C. insulated F.R. flexible copper cable (ISI MARK) in existing pipe with 6A switch control and 3/2 pin sockets fixing on separate board including all labour charges etc., complete. Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR) Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
8
-
4730.96
WORKS;Supply and fixing of 6A 3/2 pin Modular wall plug socket with shutter and 6A 1 way modular switch control on a common switch board with earth continuity including wire leads, earth connections along with all labour charges etc., complete. Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
46
-
15069.6
WORKS;Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant Low Smoke (FRLS) / HFFR P.V.C. insulated 1100 V Grade as per IS: 694 / 1990 specification for flexible copper cable (ISI MARK) in existing pipe with 6A 1 way flulsh type modular switch, Ceiling rose including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings Makes of wires : Finolex / RR kabel / Havells / APAR EBXL / KEI (HFFR) / Polycab ((HR_FR-LF) / L&T / V-Guard (HFFR) Makes of Switches : Legrand Myrius / Million mway / Gold Medal Curve / Anchor Roma viola / GM Four-Five / Havells Fabio / Panasonic Vision / L&T Englaze / Hager Insista / Benlo Vesta / C&S Primo / CPL Vysma / Polycab Levana
299
-
187407.22
WORKS;Supply and erecting PVC / GI / MS Galvanished fan hook box with hook in RCC slab including all Labour charges etc., complete.
60
-
5248.8
WORKS;Supply and Fixing of ISI 25mm outer dia medium grade, FRLS with IS:9537 part 3 regid PVC pipe. concealed in wall with PVC deep Juction boxes and all required accessories including masonary work for light, fan and separate plug point with 8 or 9 Module Hot dip galvanized Metal Box including all labour charges etc., complete. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold / Polycab / DEC
1500
-
128670
WORKS;Supply and Fixing of ISI 25mm outer dia heavygrade, FRLS with IS:9537 part 3 regid PVC pipe. concealed in Roof Slabs with PVC deep Juction boxes and all required accessories including masonary work and labour charges etc., complete. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / Gold / Polycab / DEC
2200
-
167926
WORKS;Supplying & fixing of Grab Bars including cost and conveyance and labour charges for fixing, overheads and contractor profit etc., complete for finished item of work
2
-
6453.34
WORKS;Supplying & fixing of CI Steps for Septic tank/Man holes including cost and conveyance and labour charges for fixing, overheads and contractor profit etc., complete for finished item of work
3
-
224.97
WORKS;Supplying & fixing 602 x 602 mm CI man hole frame and cover (light weight) 30 Kgs including cost and conveyance and labour charges for fixing, overheads and contractor profit etc., complete for finished item of work
3
-
10269.66
WORKS;Providing and laying Non Pressure NP-2 class R.C.C. Socket & spigot pipes confirming to BIS 458/2003 including collars/spigot jointed with stiff mixture of cement mortar in the proportion of 1:2 (1 cement : 2 fine sand) including testing of joints etc. complete including cost of material, transportation, taxes, labour charges, over heads & Contractors profit etc.
5
-
4135
WORKS;Construction of brick masonry support for CPVC pipe of size 304.80mm x 228.60mm x 228.60 mm in CM (1:8) prop including plastering and finishing with 12mm thick in CM (1:5) including cost and conveyance of all materials and all labour charges, overheads & contractors profit complete for finished item of work for all floors.
30
-
2624.4
WORKS;Providing, laying and jointing of HDPE pipes 32mm dia of PE 100 grade, 16 Kg per sqcm pressure confirming to IS 4894-1995 as per BIS No: 7634 part II/75 including testing, filling ith water with water lead including cost of necessary accessories and fixing in position including cost and conveyance of all materials, conveyance to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work.
30
-
3612.9
WORKS;Providing, laying and jointing of HDPE pipes of 50mm dia of PE 100 grade, 16 Kg per sqcm pressure confirming to IS 4894-1995 as per BIS No: 7634 part II/75 including testing, filling ith water with water lead including cost of necessary accessories and fixing in position including cost and conveyance of all materials, conveyance to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work.
100
-
21587
WORKS;Providing 110 mm Dia ISI marked PVC (Sudhakar / Nandhini) down water take pipes with socket , 4.0kg/sq.cm pressure of ISI marked including cost of necessary PVC clamps and all other accessories and fixing in position including cost and conveyance of all materials, sales & other taxes on materials to site, operational & incidental charges including all labour charges for fixing at site etc., and Overheads & Contractors profit complete for finished item of work. (APSS No. 1328)
141.6
-
41614.82
WORKS;Providing and placing on terrace (at all floor levels) polyetheylene water storage tank with double layer approved brand and manufacture with cover and suitable locking arrangement and making necessary holes for inlet and outlets and over flow pipes but without fittings and base support for tanks including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work.
10000
-
79500
WORKS;Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work-32mm Nominal bore
4
-
7766.72
WORKS;Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work-25mm Nominal bore
13
-
16616.21
WORKS;Supplying and fixing Gunmetal Gate ( GM peet ) valve as per IS-778 Class - I , Indian make heavy type including cost and conveyance of all materials , labour charges , overheads & contractors profit complete for finished item of work-20mm Nominal bore
30
-
26654.1
WORKS;Supplying, fixing, testing and commissioing of premium make CPVC pipes of SDR 11 for Hot and cold water supply, capable to withstand pressure of 7 kg/sq.cm and temperature of 80 degree C anti fungal & antibacterial type laid on ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils upto 1.0m deep, refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work-34.90mm OD pipe
91
-
29155.49
WORKS;Supplying, fixing, testing and commissioing of premium make CPVC pipes of SDR 11 for Hot and cold water supply, capable to withstand pressure of 7 kg/sq.cm and temperature of 80 degree C anti fungal & antibacterial type laid on ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils upto 1.0m deep, refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work-28.60mm OD pipe
104
-
24458.72
WORKS;Supplying, fixing, testing and commissioing of premium make CPVC pipes of SDR 11 for Hot and cold water supply, capable to withstand pressure of 7 kg/sq.cm and temperature of 80 degree C anti fungal & antibacterial type laid on ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils upto 1.0m deep, refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work-22.20mm OD pipe
224
-
44027.2
WORKS;Supplying, fixing, testing and commissioing of premium make CPVC pipes of SDR 11 for Hot and cold water supply, capable to withstand pressure of 7 kg/sq.cm and temperature of 80 degree C anti fungal & antibacterial type laid on ground or on wall including cost of tees, elbows, bends, reducers, couplings, running joints, union flanges, unions etc. with necessary excavation in all types of soils upto 1.0m deep, refilling, chiseling masonry walls and making good the walls & floors to the original surface and fixing MS clamps on walls including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work-15.90mm OD pipe
49
-
7905.17
WORKS;Supplying and fixing of stainless steel sink of size 508.00mm x 457.2mm x 203.20mm, 1mm thick of Indian make fixed on cantilever brackets including supply and fixing 31.75mm C.P. waste coupling, 31.75 mm dia PVC flexible waste pipe of 914.4 mm length of Ist quality ncluding chiselling brick masonry wall and making good & restoring to original surfaces , overheads & contractors profit complete for finished item of work in all floors
8
-
40628.72
WORKS;Supplying and fixing of CP finish brass metal body single coat hook as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
6
-
2522.28
WORKS;Supplying & fixing of PVC/SWR vent cowls for soil,waste and ventilating pipes including cost and conveyance of materials,labour charges, overheads & contractors profit for finished item of work- 110mm dia for solid waste
12
-
259.08
WORKS;Supplying & fixing of PVC/SWR vent cowls for soil,waste and ventilating pipes including cost and conveyance of materials,labour charges, overheads & contractors profit for finished item of work-75mm dia for waste water
15
-
238.65
WORKS;Supplying and fixing of Double socket PVC/SWR pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)- 110mm dia for solid waste
141
-
43786.14
WORKS;Supplying and fixing of Double socket PVC/SWR pipes (Prince/Sudhakar/Kisan/Supreme or any ISI brand) 4 Kg/Sq.cm. and fixing all special such as plain bends, off sets, door bends, single junctions, double junctions as per site requirement, fixing with PVC clamps if necessary with required number of Bombay nails including cost and conveyance of all materials to site, labour charges, overheads & contractors profit complete for finished item of work at all floor levels. (APSS No. 1302 1319 & 1326)-75mm dia for waste water
136
-
28044.56
WORKS;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
20
-
66555.6
WORKS;Supplying and fixing of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 as approved by the Engineer-In-Charge including cost and conveyance of all materials, labour charges , overheads & contractors profit complete for finished item of work in all floors.
33
-
20471.22
WORKS;Supplying and fixing European Water Closet of 1st quality conforming to IS:2556-Part-2-1973 of Hindustan / Neycer or Parryware make white glazed with 'S' trap,supplying and fixing best Indian make plastic seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 and PVC low level system parryware, slimline with internal components & short bend : 10 Ltrs. capacity single flush tank of Parryware or equivalent with internal components and fixed using required size of nails and screws, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Seiko/Senior/Nice or equivalent, 15mm PVC connections with brass union nuts CP coated including cost and conveyance of all materials to site, overheads & contractors profit etc., complete for finished item of work for all floors.
20
-
107229.8
WORKS;Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap Hindware / Parryware / Neycer with brick - ISI mark and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern Parryware or equivalent with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931, 15.0mm PVC connection with brass union nuts CP coated , 31.75mm dia brass plumber union with check nut, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work.
2
-
9280.08
WORKS;Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams jaquar complete with standard CI brackets including wooden blocks ,1 No.15.0mm PVC connection with brass union nuts CP coated , 15 mm brass angle stop valve of quarter turn spindle type of not less than 400 grams weight with internal threaded conforming to IS 8931 of first quality Indian make heavy duty Jaquar, 30.0mm dia. PVC flexible waste pipe 914.4mm length of 1st quality including cost and conveyance of all materials to site, labour charges , overheads & contractors profit for finished item of work.
33
-
80909.73
WORKS;Supplying and fixing TV shape mirror with plastic frame of size 609.6mm x 457.2mm with NP screws 1st quality including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work in all floors.
33
-
17546.76
WORKS;Supplying and fixing CP finish brass soap dish heavy type of approved make ISI quality with SS screws etc., complete including cost and conveyance of all materials, labour charges for fixing , overheads & contractors profit for finished item of work in all floors
44
-
25845.16
WORKS;Supplying and fixing of CP finish steel towel rod of 600 mm long and 20mm dia with brackets SS screws including cost and conveyance of all materials, labour charges , overheads & contractors profit for finished item of work.
44
-
18096.76
WORKS;Supplying and fixing of 3" (76.2mm) multi floor trap with jali - UPVC/SWR pipe fittings (Prince/Sudhakar/Kisan/Supreme or any other ISI Brand) as per site requirements with standard practice for all floors including cost and conveyance of all materials to site, labour charges , overheads & contractors profit etc., complete for finished item of work.
48
-
17342.4
WORKS;Supply & fixing 15 mm nominal size Chromium plated finish brass over head shower arm of 450 mm long with 90 degree bend & wall flange suitable for rain shower and with 7 ? 10 years warranty including cost and conveyance of all materials and labour charges , overheads & contractors profit complete for finished item of work for all floors.
11
-
17096.75
WORKS;Supplying and fixing of SWG Gully traps 150mm x 100mm of ISI make confirming to IS 651 & 4127 with C.I grating & constructing cement brick masonry in CM (1:6) prop., intermediate chamber and fitted with 304.8 mm X 288.6 mm (12"x9") C.I Frame with hinged cover of standard make as approved including cost and conveyance of all materials to site, labour charges, overheads & contractors profit etc., complete for finished item of work.
16
-
11307.04
WORKS;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber upto 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C.I frame and cover of 20 Kg including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work. as per Standard specification..
10
-
43537.3
WORKS;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 1524 mm (5'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
8
-
106407.28
WORKS;Constructing 904.0 mm (3?0?) dia brick masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using 2nd Class Clay Bricks of 225 mm thick from approved source having a minimum crushing strength of 5 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (exculding rock) and laying cement conrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing , overheads & contractors profit etc., complete for finished item of work as per Standard specification.
10
-
83586.6
WORKS;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)-203.20mm dia up to 5'-0? depth
50
-
47320.5
WORKS;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)-152.40mm dia up to 5'-0? depth
15
-
12134.1
WORKS;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)-203.20mm dia up to 3'-0? depth
35
-
30579.5
WORKS;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)-152.40mm dia up to 3'-0? depth
46
-
33082.28
WORKS;Supplying and laying, filling, jointing and testing SWG SP-1 pipe conforming to ISI 651 & 4127 with air tight Cement joints in CM (1.5:1) prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) and refilling with watering and tamping to the required slope including cost and conveyance of all materials to site and all labour charges , overheads & contractor profit etc., complete for finished item of work (APSS NO 1301 & 1318)-101.60mm dia up to 3'-0? depth
40
-
19314.4
WORKS;Supplying and fixing 63.5 mm dia nominal bore Medium Grade properties & weight as per IS 1239 ISI mark MS Tube for fixing of GI Sheet including cost and conveyance of all materials to work site and all operational, incidental, labour charges , overheads & contractors profit for finished item of work.etc., complete for finished item of work in all floors for stair case head room roof.
63.36
-
16922.82
WORKS;Roofing with prepainted Galvalume Trapezoidal Profile sheet of 0.50mm thick fixed to the purlins with 14 size self drilling screws with neoprene washer, end laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti capillary grove laying in over lap as per manufacturers specifications etc excluding the cost of purlins, rafters, trusses including cost and conveyance of all materials , labour charges, overheads and contractors profit etc., complete for finished item of work in all floor levels.Considering 10% for overlapping & wastage of sheets.
65.74
-
40948.79
WORKS;Lettering of Building names and room names with approved synthetic enamel paint over already prepared base of two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207). Cost of two coats of Synthetic enamel paint to be paid seperately.
2.4
-
204.07
WORKS;Providing and fixing NAME BOARD fabricated with Mild Steel sheet welded to angular/square sections fixing with suitable arrangements in compound wall as per approved drawing and details including all taxes, cost and conveyance of all materials to site, all labour charges for fabricating, fixing at site, fixing in concrete, over heads & contractor's profit etc., complete for finished item of work as directed by the engineer in charge.
120
-
9884.4
WORKS;Supply and fixing of ornamental grill made of 40mm x 40mmx 5mm MS angle alround the opening & 12mm square bars @ 125mm center to center to the peripheral angle for openings as per the approved drawing including cutting to required length, welding, painting with two coats of synthetic enamel paint over red oxide single coat including cost and conveyance of all materials, labour charges etc., complete for finished item of work for openings in buildings.
98.42
-
192087.3
WORKS;Filling with light weight concrete in Cement cinder mix (1:15) proportion using 12.5mm niminal size cinder laid in layers and compacted as directed for filling in sunken floors/ low roofs including cost and conveyance of all materials like cement, cinder etc., to site, including cost of seigniorage charges on all materials including cost of all labour charges for laying concrete, ramming, curing , overheads & contractors profit etc., complete for finished item of work. (APSS. No. 402)-Second Floor
4.23
-
11238.43
WORKS;Filling with light weight concrete in Cement cinder mix (1:15) proportion using 12.5mm niminal size cinder laid in layers and compacted as directed for filling in sunken floors/ low roofs including cost and conveyance of all materials like cement, cinder etc., to site, including cost of seigniorage charges on all materials including cost of all labour charges for laying concrete, ramming, curing , overheads & contractors profit etc., complete for finished item of work. (APSS. No. 402)-First Floor
16.33
-
43386.2
WORKS;Filling with light weight concrete in Cement cinder mix (1:15) proportion using 12.5mm niminal size cinder laid in layers and compacted as directed for filling in sunken floors/ low roofs including cost and conveyance of all materials like cement, cinder etc., to site, including cost of seigniorage charges on all materials including cost of all labour charges for laying concrete, ramming, curing , overheads & contractors profit etc., complete for finished item of work. (APSS. No. 402)-Ground floor
11.63
-
30899.05
WORKS;Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom slab,in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 12mm thick mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903)-Second Floor
14.1
-
2415.05
WORKS;Providing impervious coat to exposed RCC roof slab surfaces of sump , sump side wall,sump bottom slab,in side of septic tank , in sunken slabs etc. to required slopes with CM (1:3) prop. using screened sand 12mm thick mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm where ever necessary including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903)-First Floor
54.43
-
9322.77
WORKS;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903)-Second floor roof
197.94
-
85262.65
WORKS;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903)-First Floor roof
344
-
148178
WORKS;Providing impervious coat to exposed RCC roof slab surfaces to required slopes with CM (1:3) prop. using screened sand 20mm thick (average) mixed with water proofing compound manufactured by reputed manufacturers as approved by Engineer-in-charge at 1 Kg per one bag of cement, laid over roof slab when it is green, finished smooth with a floating coat of neat cement and thread lining at regular intervals of 45cmx45cm including cost and conveyance of all materials like cement, sand, water proofing compound, water etc., to site, including seigniorage charges, sales & other taxes on all materials and operational, incidental, and labour charges for mixing mortar, laying, lift charges, rendering smooth and thread lining, curing including rounding off junctions of wall and slab etc., and overheads & contractors profit complete for finished item of work. (APSS No. 901 & 903)-Ground floor roof
34.3
-
14774.72
WORKS;Supplying and fixing of Glass railing with 12mm thick toughened plain glass, stainless steel ( grade 304 ) sections as per approved drawing with top rail & verticals of 50mm dia pipe 2mm thick medium class fixed with D brackets, base plate of 75mm dia using bonding agent and anchor fastner and welding, drilling of 20mm dia holes with pneumatic compressor for fixing vertical posts, buffing, polishing all members of the railing thouroughly , lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit etc., complete for finished item of work.and as directed by the engineer-in-charge
31.87
-
186180.08
WORKS;Supplying and fixing of stainless steel ( grade 304 ) hand railing as per approved drawing with top rail and Vertical supports at alternative steps with base plate of 75mm dia with 50mm dia pipe of 2mm thick medium class and 25mm dia 1.6mm thick medium class pipe in horizontal of 3rows fixing in welding and vertical posts fixing by drilling of 20mm dia holes in concrete, fixing with bonding agent and anchor fasteners and welding for fixing railing, buffing, polishing all members of the railing thoroughly, lacquer finishing to present seamless finish including cost and conveyance of all materials, electrodes, welding charges, cost of all consumables, labour charges , overheads & contractors profit, for all leads and lifts etc., complete finished item of work.
38.34
-
264722.36
WORKS;Providing and applying texture paint of average 2 to 3 mm thickness over plastered surface to prepare the surface even and smooth after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, applying emery paper, Sand the surface, clean & wipe off loose dust, applying putty/ texture paint filler by putty knife / muslin pad, air dry for 2 - 3 hrs for the surface preparation including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overheads and contractor's profit etc. complete for finished item of work - excluding cost of access scaffolding for external walls-Texture paint
473.49
-
157482.77
WORKS;Supply & application of one coat of cement concrete primer & two coats of acrylic exterior emulsion paint having VOC (Volatile Organic Compound) content less than 50 grams/litre for exterior walls including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. For External walls-EXTERNAL WALLS PAINTING
1235
-
243998.95
WORKS;Supply & application of one coat of cement concrete primer & two coats of acrylic based Plastic emulsion paint approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, overheads & contractors profit etc. complete for finished item of work at all floor levels as per SS 911 for internal walls INTERNAL WALLS PAINTING
3921.34
-
583613.03
WORKS;Painting to new ceilings with 2 coats of ready mixed oil bound washable distemper of approved brand and shade over a base coat of Cement primer interior grade ? 1 of approved brand, making 3 coats in all to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges, and overheads & contractors profit complete etc. complete for finished item of work as per SS 911 for all floors CEILING PAINTING
1672.29
-
171326.11
WORKS;Providing, supplying & fixing of Fixed Louvered Ventilator made out of multi chambered uPVC sections with Glazing bead shall be co-extruded with Grey colour soft PVC. having isolated drainage and reinforced with Galvanized Iron profiles throughout the window. The outer frame having an overall size of 60 mm x 55 mm x 2.40 with reinforcement of 1 mm thickness and Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Ventilator shall be provided with 4.5 mm Pin Head glass, standard hardware. Wall thickness of frame & Mullion shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.
9.96
-
68122.62
WORKS;Supplying and fixing of Unplasticised Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ? (2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (94 mm x 45 mm)/(80 mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site complete for finished item of work.
98.42
-
748074.67
WORKS;Painting two coats with synthetic enamel paint Grade-II VOC (Volatile Organic Compound) content less than 50 grams/litre over a primary coat to new iron work including cost and conveyance of all materials to site, sales & other taxes, incidental, operational and all labour charges etc.,and overheads & contractors profit complete for finished item of work in all floors. (SS No. 1201, 1212 & 1207).
100.82
-
13887.95
WORKS;Painting to new wood work and flush shutters with lappam finish , over a primary coat and painting two coats of Acrylic Emulsion paint interior grade VOC (Volatile Organic Compound) content less than 50 grams/litre of approved shade including cost and conveyance of all materials to site cost of primer coat and all labour charges etc. complete including applying sand paper on lappam coats for neat finish including sales & other taxes on cost of all materials etc.and overheads & contractors profit complete (APSS No.1200, 1207 & 1211) in all floors.
385.21
-
63159.03
WORKS;Supply and fixing of Aluminium Heavy duty door stopper of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
53
-
6563.52
WORKS;Supply and fixing of Aluminium fancy Handles ? 150mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
106
-
10478.1
WORKS;Supply and fixing of Aluminium fancy Handles ? 125mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
60
-
5044.8
WORKS;Supply and fixing of Aluminium Flat Latches ? 300mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
45
-
5828.4
WORKS;Supply and fixing of Aluminium Flat Latches ? 200mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
30
-
3272.1
WORKS;Supply and fixing of Aluminium Aldrop ? 200mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
30
-
5658
WORKS;Supply and fixing ofAluminium Aldrop ? 300mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
45
-
10736.55
WORKS;Supply and fixing of Aluminium tower bolts ? 200mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
30
-
2249.7
WORKS;Supply and fixing of Aluminium tower bolts ? 300mm long of approved quality to Flush Doors including cost and conveyance of all material and labour charges etc including complete overheads and contractors profit for finished items of the work.
53
-
6563.52
WORKS;Supply and fixing powder coated aluminium fully glazed swing door as per the approved drawing with fixed fan light of 500mm height at top door using aluminium sections of 101.60 mmm x 44.45mm , 3.18 mm thick for frame and door shutter made of styles , top and middle rail of 47.62mm x 44.45mm , 3.18 mm thick and bottom rail of 114.30mm x 44.45 mm , 3.18mm thick,powder coating of alluminium sections 25mm microns thick, 5 mm thick plain float glass fitted with suitable aluminium glazing clips and rubber beading in fan light portion, double shutters fitted with 5mm thick frosted / ground glass in the top half and MDF Board: interior-Both Side Laminated -12 mm thick in the bottom half fitted with suitable aluminium glazing clips and rubber beading,shutters mounted on double action hydraulic floor spring of approved brand manufacture IS : 6315 marked , Hardwyn make M-3000 for doors including cost of cutting floors as required , embedding in floors and SS cover plates with brass pivot and sigle piece MS Sheet outer box with slide plate etc.complete (Weight Capacity up to 130 Kgs) as approved by Engineer-in-Charge including supply and fixing ISI marked powder coated aluminium fixtures of 3 Nos. of butt hinges (IS:205) of 150mm long(for each shutter), 4 Nos.tower bolts 10mm bolt (IS:204) 300mm long , 4 Nos.alluminium handles (IS:208) 150mm dia and 2 Nos. aldrops (IS:2681) 300mm long including labour charges for manufacturing door , fixing the door with required No. of screws etc., including overheads & contractors profit complete for finished item of work. (The Aluminium section used shall be standard make confirming to IS 1948 ? 1961) and as approved by the Engineer) (2000mm x 2600mm)
10.4
-
64289.37
WORKS;Providing & Fixing of Scientific Doors with metal door frames and door shutters made of galvanize steel (base steel as per IS 513 of 0.58 mm thick D quality, galvanized as per IS 277 with Zinc of 120 GSM). coated with Zinc Phosphate Primer to receive any paint on site or finished with Thermo setting Polyurethane paint of Aliphatic Grade providing high levels of scratch resistance and durability/Epoxy polyester powder for powder coating paint thickness 50-60 microns (Dry film thickness) outer frame section of 100 x 58 mm x 1.2 mm thick, shutter section of 0.80 mm thick galvanized steel sheet pressed (roll formed) for 46mm thick fully flush, double skin door shell seam joints at stile edges, in-fill of honeycomb Kraft paper used to give the required rigidity and effective acoustic insulation with 6? Tower bolt ? 2 Nos., 6? D handles ? 2 Nos., 10? Aldrops ? 1 No., Butt Hinges ? 6 Nos, Mortise Lock of approved quality ? 1 No, frames fixed to the concrete/masonry wall by means of self expanding screws complete for finished item of work for Double leaf Door
5.2
-
64958.24
WORKS;Providing and fixing of Moulded panel solid core flush door shutters using water resistant hardwood fibre HDF / MDF fibre boards skins of 2.5 mm thick of Masonite or equivalent doors - 30 mm thick fixing in position with all necessary arrangements including cost of materials, transportation, labour charges, over heads & contractor's profit etc., for finished item of work.
47.25
-
104037.89
WORKS;Providing and fixing Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 to the required shutter size fixing in position with all necessary arrangements including cost of materials, transportation, labour charges, over heads & contractor's profit etc., for finished item of work.
107.62
-
327445.69
WORKS;Mild Steel Hallow single rebate general purpose door frames manufactured using cold roll formed process steel sheet of 1.25 mm thick bright (Cold Rolled Close Annealed (CRCA) and profile-B of size 105 x 60 mm conforming to IS 4351 - 2003 including pretreatment,phosphating with Hinges, Base Ties,Holdfast Lugs, Mortar Guards, shock absorbers and provision for Tower Bolts, Aldrops, Lock & Strike plates etc. for both single and double shutter doors.
409.7
-
159660.09
WORKS;Supply and fixing of doors as per approved drawings with best teak wood frame of section 100mm x 65 mm with fixed fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 35mm thick double shutters with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides, including cost and conveyance to site of teak wood frame, flush shutter, laminate sheet including supply and fixing 6 nos MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked brass fixtures of 6 Nos butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 2 Nos tower bolts- 10mm (IS:204) of 200 mm long at top, 1 No. tower bolt- 10mm bolt (IS:204) 150mm long at bottom, 2 Nos. 150mm long fancy handles (IS:208) , 2 Nos door stopper and 2 Nos Rubber / Nylon door stop bushes including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc., including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (2000mm x 2600mm)
5.2
-
24436.2
WORKS;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and overheads & contractors profit complete for finished item of work-Second Floor
54.73
-
45011.05
WORKS;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and overheads & contractors profit complete for finished item of work-First Floor
181.62
-
149367.92
WORKS;Providing dadooing to walls with Digital/ Polished glazed full body porcelain wall tiles of approved size or 300 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 6-8 mm1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and overheads & contractors profit complete for finished item of work-Ground floor
178.57
-
146859.54
WORKS;Flooring with Non-skid red or white full body Ceramic floor tiles of size minimum of 300 x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, over heads and contractors profit etc., complete for finished item of work-Second Floor
14.81
-
11266.12
WORKS;Flooring with Non-skid red or white full body Ceramic floor tiles of size minimum of 300 x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, over heads and contractors profit etc., complete for finished item of work-First Floor
57.16
-
43482.18
WORKS;Flooring with Non-skid red or white full body Ceramic floor tiles of size minimum of 300 x 300 mm and thickness between 7-8mm 1st quality conforming to IS:13711, IS:13712,IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as approved by Engineer-in-charge, set over base coat of cement mortar (1:8), 12mm thick using screened sand over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete, including seigniorage charges, over heads and contractors profit etc., complete for finished item of work-Ground floor
40.68
-
30945.68
WORKS;Flooring with Chequered Cement Concrete heavy duty tiles conforming to IS: 13801 using aggregates, cement,pigments of size 300 x 300 mm and thickness 25 mm of any shades set over base coat of cement mortar (1:6), 12 mm thick using screened sand over CC bed alredy laid or RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm and jointed with neat white cement to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement , sand , water and tiles etc.,and overheads & contractors profit complete including seigniorage charges complete for finished item of work Ground floor
33.4
-
24036.98
WORKS;Flat Nosing the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.
195
-
12850.5
WORKS;Half Rounding the edges of Marble/ Granite stone slabs of all thicknesses including polishing the same.
49
-
20598.62
WORKS;Providing High polished Granite stone slabs other than black in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701) for Staircase Risers-Second Floor
7.08
-
26239.33
WORKS;Providing High polished Granite stone slabs other than black in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701) for Staircase Risers-First Floor
13.56
-
50254.99
WORKS;Providing High polished Granite stone slabs other than black in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701) for Staircase Risers-Ground floor
14.55
-
53924.05
WORKS;Providing High polished Granite stone slabs other than black in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701) for Staircase Treads-Second Floor
20.65
-
82161.19
WORKS;Providing High polished Granite stone slabs other than black in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701) for Staircase Treads-First Floor
38.2
-
151988.25
WORKS;Providing High polished Granite stone slabs other than black in single piece as specified set over a base coat of CM (1:5) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701) for Staircase Treads-Ground floor
39.55
-
157359.56
WORKS;Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for platforms (S.S.701 & special)--Second Floor
4.42
-
15463.81
WORKS;Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for platforms (S.S.701 & special)--First Floor
6.74
-
23580.56
WORKS;Flooring with 16 to 18 mm thick high polished granite stone slabs black colour as approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work for platforms (S.S.701 & special)--Ground floor
9.28
-
32467.01
WORKS;Flooring with 16 to 18mm thick high polished granite stone slabs other than black and regular colours (i.e. of shades like paradiso / bala flower / copper silk / laka red / lavender blue) with borders and design as per the pattern approved by the Engineer-in-Charge of length not less than 2.43 mts set over base coat of cement mortar (1:8) , 20mm thick using screened sand over CC bed already laid or RCC roof slab including neat grey cement slurry of honey like consistency spread @ 3.3 Kg per sqm and jointed neatly with white cement paste mixed with pigment of matching shade to full depth including cost and conveyance of all materials like cement , sand , water , granite slabs etc., to work site and all operational, incidental labour & lift charges, polishing charges and seigniorage charges and all other taxes on all materials, cost of base coat and overheads & contractors profit complete for finished item of work (S.S.701 & special) for Flooring in Rooms & Corridors-Ground floor
20.76
-
82786.52
WORKS;Providing skirting of internal walls with polished shahabad / Tandur stone slabs of 15mm to 18mm thick in as specified set over a base coat of CM (1:3) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701)--First Floor
1.13
-
722.3
WORKS;Providing skirting of internal walls with polished shahabad / Tandur stone slabs of 15mm to 18mm thick in as specified set over a base coat of CM (1:3) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work for treads and risers. (APSS No.703 & 701)-Ground floor
4.32
-
2761.34
WORKS;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)-Third Floor
14.12
-
8161.92
WORKS;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)-Second Floor
13.26
-
7664.81
WORKS;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)-First Floor
5.25
-
3034.71
WORKS;Flooring with polished shahabad / Tandur stone slabs of 15mm to 18mm thick of approved size as specified set over a base coat of CM (1:8) , 12mm thick using screened sand over already laid CC bed / RCC roof slab including neat cement slurry of honey like consistency spread @ 3.3 Kgs per Sqm and jointed with neat cement to full depth including cost and conveyance of all materials like cement, sand, water, flooring stones etc. complete including seigniorage charges, sales & other taxes on all materials including all labour charges like dressing of flooring stones to the required size, mixing of cement mortar, laying, lift charges , cost of base coat etc., and overheads & contractors profit complete for finished item of work. (APSS No.703 & 701)-Ground floor
26.72
-
15445.23
WORKS;Providing dadooing to walls with Double charged/Multi charged vitrified tiles of approved size or 600 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and overheads & contractors profit complete for finished item of work. For Dadoo in Corridors,wards & Doctor Rooms-Second Floor
97.69
-
80342.21
WORKS;Providing dadooing to walls with Double charged/Multi charged vitrified tiles of approved size or 600 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and overheads & contractors profit complete for finished item of work. For Dadoo in Corridors,wards & Doctor Rooms-First Floor
155.07
-
127532.67
WORKS;Providing dadooing to walls with Double charged/Multi charged vitrified tiles of approved size or 600 x 600 mm size with any type of design texture such as marble finish, wooden, bamboo, stone finishes etc.,scratch less, stain free and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including seigniorage charges etc., and overheads & contractors profit complete for finished item of work. For Dadoo in Corridors,wards & Doctor Rooms-Ground floor
518.65
-
426548.13
WORKS;Providing skirting to internal walls to 10 cm height with vitrified tiles 8mm thick , regular finish and normal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete including seigniorage charges etc., complete for finished item of work.(APSS No.701 &707)--Second Floor
10.15
-
10845.07
WORKS;Providing skirting to internal walls to 10 cm height with vitrified tiles 8mm thick , regular finish and normal colour, length equal to flooring tiles, set over base coat of CM(1:5) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc.,and overheads & contractors profit complete including seigniorage charges etc., complete for finished item of work.(APSS No.701 &707)-First Floor
31.15
-
33283.15
WORKS;Flooring with Double charged/Multi charged stain free full body porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with border design for blind people?s access as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistency spread @ 3.3 kgs per Sqm. and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)-Second Floor
199.33
-
214329.58
WORKS;Flooring with Double charged/Multi charged stain free full body porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with border design for blind people?s access as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistency spread @ 3.3 kgs per Sqm. and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)-First Floor
522.85
-
562194.46
WORKS;Flooring with Double charged/Multi charged stain free full body porcelain vitrified tiles of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs with border design for blind people?s access as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistency spread @ 3.3 kgs per Sqm. and jointed neatly with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of seigniorage charges on all materials, cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 707)-Ground floor
503.19
-
541055.05
WORKS;Supply and application of epoxy coving with SIKA brand with 50mmx50mm width at the corners of the all walls in Operation Theatres, labour rooms including cost and conveyance of all materials and labour charges, overheads and contractor profit etc., complete for finished item of work .
26.66
-
14289.76
WORKS;Supply and application of epoxy flooring of light green or light blue colour in Operation Theatres and labour rooms - SIKA Epoxy seamless joint free finish with 3mm thickness and anti slip & water washable chemical resistance durable and non particle shedding with attractive finishing including cost and conveyance of all materials and all labour charges, overheads and contractor profit etc., complete for finished item of work.
35.24
-
68365.6
WORKS;Gronolithic Concrete flooring 20 mm thick with (1:1:2), using 6mm to 12 mm size hard granite machine crushed metal and screened sand laid over CC bed already laid or RCC roof slab, in alternate panels of size not exceeding 1.50 m x 1.50 m and finishing the top surface to required smooth and level as possible and it is expected that a ZERO level is provided to a tolanance of 3mm and thread lining including cost of all materials like cement, metal sand and water etc. complete, including seigniorage charges etc.,and overheads & contractors profit complete for finished item of work. (APSS No.701 & 710) Ground floor
35.24
-
11610.88
WORKS;20mm thick plain cement mortar Raised Bands using screened sand with CM 1:4 (1 cement: 4 Sand) upto 300mm in width as per approved drawings, including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing etc as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work .(SS 901,903 & 904)-FLOORING
174.74
-
52156.4
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for Third Floor
130.19
-
51022.76
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for Second Floor
408.96
-
158598.78
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for First floor
541.77
-
207893.4
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for internal walls & External walls. (SS 901,903 & 904) EXTERNAL WALLS PLASTERING Ground floor
627.57
-
238250.67
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for internal walls & External walls. (SS 901,903 & 904) INTERNAL WALLS PLASTERING-Third Floor
150.01
-
58790.42
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for internal walls & External walls. (SS 901,903 & 904) INTERNAL WALLS PLASTERING-Second Floor
834.25
-
323530.49
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for internal walls & External walls. (SS 901,903 & 904) INTERNAL WALLS PLASTERING-First floor
1606.56
-
616485.27
WORKS;Plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:6) and top coat of 4mm thick in CM (1:4) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves as directed by Engineer - in - charge etc., and overheads & contractors profit complete for finished item of work for internal walls & External walls. (SS 901,903 & 904) INTERNAL WALLS PLASTERING-Ground floor
1330.52
-
505118.61
WORKS;Ornamental ceiling plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) -Second Floor
258.7
-
106506.79
WORKS;Ornamental ceiling plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) -First Floor
649.59
-
262271.96
WORKS;Ornamental ceiling plastering 12mm thick in two coats using screened sand with base coat of 8mm thick in CM (1:5) and top coat of 4mm thick in CM (1:3) with dubara sponge finishing including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work.(SS 901,903 & 904) -Ground floor
663.77
-
262726.8
WORKS;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work. (APSS No. 402)Bed Blocks, Hold fasts, levelling course, concrete flooring etc-Third Floor
0.07
-
388.53
WORKS;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work. (APSS No. 402)Bed Blocks, Hold fasts, levelling course, concrete flooring etc-Second Floor
0.83
-
4574.71
WORKS;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work. (APSS No. 402)Bed Blocks, Hold fasts, levelling course, concrete flooring etc-First Floor
2.11
-
11547.95
WORKS;Plain Cement Concrete (1:3:6) nominal mix using 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm, 15% of 13.20/12.50mm, 15% of 10mm and 10% of 6mm) from approved quarry including cost and conveyance of all materials like cement, fine aggregate(sand), coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for mixing, laying concrete in position, curing etc., & lift charges , and overheads & contractors profit for finished item of work. (APSS No. 402)Bed Blocks, Hold fasts, levelling course, concrete flooring etc-Ground floor
2.73
-
14835.42
WORKS;Reinforced Masonry for partition walls (115 mm thick) in CM (1:6) prop. (Cement : Sand) using Fly ash /lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50Kg/Sq cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and seigniorage charges and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges and Overheads & Contractors profit complete for super structure wall (APSS No. 501 & 509)--Second Floor
124.18
-
91395.24
WORKS;Reinforced Masonry for partition walls (115 mm thick) in CM (1:6) prop. (Cement : Sand) using Fly ash /lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50Kg/Sq cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and seigniorage charges and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges and Overheads & Contractors profit complete for super structure wall (APSS No. 501 & 509)--First Floor
478.69
-
332718.27
WORKS;Reinforced Masonry for partition walls (115 mm thick) in CM (1:6) prop. (Cement : Sand) using Fly ash /lime solid blocks of size 290mm x 100mm x 140mm having minimum compressive strength of 50Kg/Sq cm and using two mild steel bars of 6mm dia. in every third layer of brick masonry , with free joints of main brick work including cost and seigniorage charges and conveyance of all materials and water from approved sources to work site and all operational and incidental, labour charges such as scaffolding , mixing mortar , constructing masonry , lift charges, curing etc. complete but excluding cost of steel and its fabrication charges and Overheads & Contractors profit complete for super structure wall (APSS No. 501 & 509)--Ground floor
147.93
-
96763.97
WORKS;Masonry work in CM(1:6) prop with flyash Cement / lime solid blocks of size 290mm x 225mm x 140mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs , Gypsum of 5kgs and stone dust including cost and conveyance of all materials, labour charges, seigniorage charges, scaffolding and curing etc., and Overheads & Contractors profit complete with a compressive strength not less than 50 kg/sq.cm for super structure wall (APSS No. 501 & 504) MASONRY?Third Floor
26.74
-
180303.81
WORKS;Masonry work in CM(1:6) prop with flyash Cement / lime solid blocks of size 290mm x 225mm x 140mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs , Gypsum of 5kgs and stone dust including cost and conveyance of all materials, labour charges, seigniorage charges, scaffolding and curing etc., and Overheads & Contractors profit complete with a compressive strength not less than 50 kg/sq.cm for super structure wall (APSS No. 501 & 504) MASONRY?Second Floor
107.1
-
703091.15
WORKS;Masonry work in CM(1:6) prop with flyash Cement / lime solid blocks of size 290mm x 225mm x 140mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs , Gypsum of 5kgs and stone dust including cost and conveyance of all materials, labour charges, seigniorage charges, scaffolding and curing etc., and Overheads & Contractors profit complete with a compressive strength not less than 50 kg/sq.cm for super structure wall (APSS No. 501 & 504) MASONRY?First floor
131.73
-
841343.7
WORKS;Masonry work in CM(1:6) prop with flyash Cement / lime solid blocks of size 290mm x 225mm x 140mm for manufacturing of flyash solid blocks using flyash of 80 kgs, cement of 15 kgs , Gypsum of 5kgs and stone dust including cost and conveyance of all materials, labour charges, seigniorage charges, scaffolding and curing etc., and Overheads & Contractors profit complete with a compressive strength not less than 50 kg/sq.cm for super structure wall (APSS No. 501 & 504) MASONRY-Ground floor
221.02
-
1372282.24
WORKS;Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 20mm size (SS5) hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., shuttering, machine mixing, laying concrete, lifting concrete manually , curing etc., and overheads & contractors profit complete as per drawings but excluding cost of steel and it's fabrication charges for finished item of work (APSS NO. 402 & 403) for Dummy columns-Third Floor
2.43
-
23486.22
WORKS;Reinforced cement concrete (1:5:10) proportion (Cement: fine aggregates: coarse aggregate) using 20mm size (SS5) hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including centering using Casurina Ballies , Bamboos , Wooden Reapers , Runners , Wood Posts , Wall Plates etc., shuttering, machine mixing, laying concrete, lifting concrete manually , curing etc., and overheads & contractors profit complete as per drawings but excluding cost of steel and it's fabrication charges for finished item of work (APSS NO. 402 & 403) for Dummy columns-Second Floor
4.1
-
38765.21
WORKS;Providing Mild steel (MS) steel bars (Fe 250 grade as per IS 432) of different diameters including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126)
2.58
-
131270.94
WORKS;Providing HYSD bars of (Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc. ,and overheads & contractors profit complete for finished item of work.( APSS No.126) REINFORCEMENT STEEL
76.64
-
3945172.76
WORKS;Reinforced Cement Concrete M 20 Nominal mix using 12mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403).25mm thick Shelves-Second Floor
17.4
-
6119.23
WORKS;Reinforced Cement Concrete M 20 Nominal mix using 12mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403).25mm thick Shelves-First Floor
54.01
-
18442.25
WORKS;Reinforced Cement Concrete M 20 Nominal mix using 12mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403).25mm thick Shelves-Ground floor
28.82
-
9546.05
WORKS;Reinforced Cement Concrete M 20 Nominal mix using 12mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403). Platforms & Shelves 50mm thick platforms-Second Floor
20.2
-
9973.55
WORKS;Reinforced Cement Concrete M 20 Nominal mix using 12mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403). Platforms & Shelves 50mm thick platforms-First Floor
49.11
-
23745.67
WORKS;Reinforced Cement Concrete M 20 Nominal mix using 12mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 13.20/12.50mm , 20% of 10mm and 20% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, laying concrete, lift charges, curing etc., and overheads & contractors profit complete for finished item of work (APSS No. 402 & 403). Platforms & Shelves 50mm thick platforms-Ground floor
44.37
-
20999.88
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 12mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal of 13.20/12.50mm , 10mm and 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, admixture, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including labour charges for mixing, laying, curing etc., and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) ( as per mix design results) (RCC chajjas) -Second Floor
5.7
-
5684.15
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 12mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal of 13.20/12.50mm , 10mm and 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, admixture, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including labour charges for mixing, laying, curing etc., and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) ( as per mix design results) (RCC chajjas)-First Floor
17.38
-
16838.09
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 12mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal of 13.20/12.50mm , 10mm and 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, admixture, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for 60cm wide sun-shades 7.5cm thick at fixed end and 5cm thick at free end with an average thickness of 6.25cm including labour charges for mixing, laying, curing etc., and Overheads & Contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402, 403 & 903) ( as per mix design results) (RCC chajjas) -Ground floor
19.83
-
18603.32
WORKS;Plain Cement Concrete M 20 design mix using WEIGH BATCHER / MIXER, 20mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contractors profit etc., complete for finished item of work (APSS No. 402 & 403) for steps -Second Floor
0.85
-
5948.21
WORKS;Plain Cement Concrete M 20 design mix using WEIGH BATCHER / MIXER, 20mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contractors profit etc., complete for finished item of work (APSS No. 402 & 403) for steps -First Floor
1.75
-
12114.5
WORKS;Plain Cement Concrete M 20 design mix using WEIGH BATCHER / MIXER, 20mm size hard granite machine crushed graded metal (Coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry, using a minimum quantity of 350 kgs. of cement per 1 cum of concrete including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc., to site and cost of seigniorage charges on all materials including steel centering, shuttering, machine mixing, lift charges, laying concrete,vibrating, curing, overheads & contractors profit etc., complete for finished item of work (APSS No. 402 & 403) for steps -Ground floor
2.42
-
16570.32
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402 STAIRCASES ? 175mm thick-Second Floor
15.33
-
25518.32
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402 STAIRCASES ? 175mm thick-First Floor
33.76
-
55314.41
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402 STAIRCASES ? 175mm thick Ground floor
33.76
-
54432.26
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF SLAB ? Unsupported height 3.66m : 150mm thick-First Floor
35.17
-
51681.96
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF SLAB ? Unsupported height 3.66m : 150mm thick Ground floor
35.17
-
50762.62
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF SLAB ? Unsupported height 3.66m : 125mm thick-Second Floor
247.43
-
331905.08
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF SLAB ? Unsupported height 3.66m : 125mm thick-First Floor
600.28
-
790214.59
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF SLAB ? Unsupported height 3.66m : 125mm thick Ground floor
634.58
-
818785.88
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF BEAMS - Unsupported height 3.66m-Second Floor
16.99
-
190546.93
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF BEAMS - Unsupported height 3.66m-First Floor
42.43
-
466269.63
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) ROOF BEAMS - Unsupported height 3.66m-Ground floor
43.87
-
472125.43
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)-LINTELS-Third Floor
0.07
-
861.12
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)-LINTELS-Second Floor
1.15
-
13926.09
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)-LINTELS-First Floor
3.42
-
40758.29
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)-LINTELS Ground floor
3.82
-
44787.55
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) COLUMNS Unsupported height 3.66m-Third Floor
2.43
-
30075.24
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) COLUMNS Unsupported height 3.66m-Second Floor
15.01
-
181731.62
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) COLUMNS Unsupported height 3.66m-First Floor
29.44
-
348480.4
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials, centering using steel scaffolding pipes, Jack props, wallers, Foot plates, brackets, steel centering plates. etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, lifting of concrete manually, laying concrete, curing , overheads & contractors profit etc., complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) COLUMNS Unsupported height 3.66m-Ground floor
46.38
-
536404.64
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) -PLINTH BEAMS
35.67
-
405892.5
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) PEDESTALS
15.81
-
151073.72
WORKS;Supply and placing of the Design Mix Concrete M 25 grade corresponding to IS 456 with minimum cement content of 360 kgs per 1 cum of concrete using BATCHING PLANT with 20mm size graded machine crushed hard granite metal (coarse aggregate) ( consisting of nominal size metal 60% of 20mm , 15% of 13.20/12.50mm , 15% of 10mm and 10% of 6mm ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials , centering using Steel scaffolding pipes , jack props , wallers , Foot plates , brackets , steel centering plates etc., including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc., and overheads & contractors profit complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) -FOOTINGS
94.35
-
855367.66
WORKS;Pointing 12mm thick single coat in CM (1:5) using screened sand including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, and all operational, incidental charges on materials and including cost of all labour charges for mixing mortar, finishing, curing as directed by Engineer-in-charge etc., and overheads & contractors profit complete for finished item of work for basement works. (SS 901,903 & 904)
192.31
-
54216.04
WORKS;Coursed Rubble stone masonry in CM (1:6) prop: (Cement: unScreened sand) 2nd sort using hard granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand, water, stones etc., from approved quarry, to site and including seigniorage charges, sales & other taxes on all materials including labour for cutting stones to required size and shape, mixing, of cement, mortar, construction, curing etc.,and overheads & contractors profit complete for finished item of work. (APSS No. 601 & 615)
72.01
-
293017.33
WORKS;Filling with carted gravel in trenches,sides of foundations and basement with initial lead in layers not exceeding 15cm thick,watering and ramming including cost and conveyance of water to work site and all operational,incidental, labour charges,hire charges of T&P etc., and overheads & contractors profit complete for finished item of work(APSS NO.309&310)
367.47
-
157141.2
WORKS;Filling with useful available excavated earth (excluding rock) with a lead of 50 m in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete for finished item of work. (APSS NO.309&310)
281.73
-
10162
WORKS;Plain Cement Concrete (1:4:8) (cement: fine aggregate: Coarse aggregate) for foundations flooring bed using coarse aggregate 40mm size hard , machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in foundations and under flooring bed, ramming in 15 cm layers finishing top surface to the required level curing etc., and overheads & contractors profit complete for finished item of work. (APSS No. 402) Under Footings
111.23
-
447428.24
WORKS;Pre construction Anti termite is a process in which chemical toxic to sub terrain termites is apply/ inject into soil during early stage of building Construction Treatment of soil Beneath the building and around the foundations conduct and chemical use as per BIS - IS 6313 (Part -2) 2013 code specification & CIB RC registered termiticide which creates a continuous chemical barrier beneath the building which kills or repels terminates & impervious to tremite entry Imidacloprid 30.5% SC (IS 63131) dissolve 2.1 Ml/1 liter of water and apply emulsion/solution @ 7.5 Litres/Square meter (Sqm) of internal, external vertical surface of the columns , plinth beams (Back filling) walls and floor junction, external perimeters, along retaining wall @ 5.0 Liters/Sqm of the horizontal surface of basement top surface of the basement filling below flooring bed (Plinth) & @ 2.0 Litres/ Line meter at expansion joints. The substructure of a depth of 500mm around columns & 300mm deep around plinth beams, basements & floor filling area including excavation channel along the wall & rodding etc. cost & Conveyance of all materials to the site, cost of labour for spraying, rodding etc. complete for furnished item of work as per the approval of the Engineer-in-charge(Plinth area measurements will be taken for payment)
698
-
118953.16
WORKS;Drilling of holes in hard granite or sheet rock above 18mm dia or required diametre upto a depth of 2.00m as per the drawings, cleaning the holes manually including fixing of 25mm dia bars 2.00m in rock and 1.00m in concrete fixed in drilled hole with approved epoxy bonding agent including cost of epoxy,all materials and labour complete as per approved drawing/ as per site conditions including cost of reinforcement and its fabrication as directed by the Engineer-in-Charge. (Average length of 25mm dia bar is 1.5m,if not the amount will be paid accordingly)
536
-
434620.96
WORKS;Excavation in Hard rock blasting prohibited ? Mechanical means up to 3m depth including cutting, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections including all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete.
47.18
-
64757.38
WORKS;Excavation in ordinary rock not requiring blasting ? Mechanical means upto 3m depth including cutting, trimming bottom and side slopes in accordance with requirements of lines, grades and cross-sections including all operational, incidental, labour charges, hire charges of T&P etc., and overheads & contractors profit complete.
47.18
-
6168.78
WORKS;Earth work excavation for foundations (Mechanical Means) for buildings in ordinary soils and depositing on bank for all lifts and with an initial lead of 10m and up to 3m depth including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work including seigniorage excluding dewatering charges etc., as per SS 20 B(APSS 308)
456.26
-
46743.84
Evaluation Notes How It Works ?
Potential Partner
Select Your Requirements