Nalsar University Of Law Tender

Internal Painting: M&L Painting to existing walls with 2 coat of ready mixed oil bound washable distemper of approved brand and shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operations, incidental labour charges etc., complete for finished item of work as per SS 911 for internal walls for Oil Bound Distemper paint- 2 Coat.

M& L exterior walls are painted with one coat of primer and 2 coats of ACE paint

Providing & fixing of openable windows with fly mesh made of pre -painted steel as per IS 513 of 0.58 mm thick galvanized as per IS 277 finish painted with a polyester paint and the section for outer frame of 72x 55mm, centre mullion of 72x50mm, section for fixed glass beading section of 12x12 mm and section for shutters of 48x25 mm and outer frame & mullion sections with rebate for glazed shutters, fly mesh and a 20mm provision for quard bars/ grills and fly mesh shutter section of 20x40 mm stay handles, latch 2nos of heavy duty staineless steel pivot hinges per shutter and panelled with 5 mm thick [pain float glass and SS mesh for fly mesh shutter (304 grade), fitted using rubber, gaskets including fixing the windows in the concrete/masonry wall by means of self expanding screws including 10mm square quard bars with 6" (152.4mm) pitch, complete for a size 6' 0" x4'0" (1828.8mmx1219.2 mm) including overheads and contractor profit etc., complete for finished item of work

providing mild steel tubes & pipes of all diameters as per IS-1161, of different diameters, cutting and fabricating to required sizes and shapes, placing in position as per approved designs and drawings, incluidng cost and conveyance of all mild steel tubes & pipes setions and all wastages such as overlaps, coupling weleds joints etc and all operational, incidental charges, including labour charges for fabricating all heavy steel work like trussersstanchions, heavy beams and girdens ercting and fixing in position by using chain pulley blocks , Derek pole arrangements and cranes etc., including overheads and contractors profit complete for finisghed item of work.

supply & fixing of rolling shutter made of 80x 1.25 mm machine rolled CRCA laths, interlocked together through their entire length and jointed together at the end by end -locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as per special spec: 1108, including overheads and contractors profit complete for finished items of work.

Random rubble stone masonry in CM (1:8) prop: (cement: Screened sand) using hard Granite stones carted from approved quarry including cost and conveyance of all materials like cement, screened sand water stone etc., to site labour for cutting stones to required size and shape, mixing of cement mortar, construction, curing and cost of overheads & contractors profit etc., complete for finished item of work in foundation and basement (APSS nO. 601&615)

supplying, fabricating and fixing of MS angles 50x50x5mm over compound wall including cost and conveyance of all materials to work site and all operational, incidental, labour chargess etc, including overheads & contractors profit complete for finished item of work

Supplying and fixing galvanised steel barbed wire conforming to IS 278-1978 weighing 9.38 kg per 100 metres (min.,) straining and fixing to any typr of standard rails, starining bolts including securing with and proviision of galvanised mild steel wire, staples or steel pins etc., as directed (posts and struts of wood, concrete, steel etc., ) including cost and conveyance of all materilas to work site and all operational, incidental, labour charges etc incluidng overheads & contrcators profit complete for fininshed item of work.

Earth work excavation for building foundation and depositing on bank for all lifts and with an initial lead of 10 m including all operational, incidental, labour charges such as shoring, sheeting planking strutting etc and overheads and contractor profit complete for finished item of work excluding dewatering charges as per SS 20B (APSS 308) in ordinary soil -Mechanical means

supply and laying of sand in desiel room

supply and laying 20mm graded aggregate