Municipality Tender

Toilet block;Labour charges for fixing of exhaust fan in wall with 23/0060 3 core (0.15mm dia of each lead) twisted/flat heavy copper wire and masonary work of making hole, finishing etc., complete.

Toilet block;Supply,Transportation of heavy duty exhaust fan 12"(300 mm) size ISI 900 RPM with metal blades wiremesh with all accessories etc complete Makes : Crompton / Havells Ventil Air-DB / Orient hill air.

Toilet block;Wiring with 2 runs of 22/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete

Toilet block;Supplying and fixing of sudhakar PVC 25mm dia pipe for electrical pipeing

Toilet block;Supply and fixing of 300mm thick single side prelam solid panel PVC door frame (Choukat) providing and fixing factory made pac single side prelam door including all labours etc complete

Toilet block;Supply and installation of modular toilet cubicles as per the approved drawings and directions of Engineer-in-Chief for heigh 1995mm inclduing 150mm clear gap at bottom using high pressure laminate boards of 12mm thick with stainless steel grade 304 hardware like slef-closing hinges, adjustable legs and alluminium SS finish section for top rail, U&T channels etc complete with warranty for the rest room workmanship and hardware (accessories) aganist any manufacturing defects includig cost of material, transportation and all necessary accessories etc complete for finished item of work. Size of units 5'x4' Fts

Toilet block;supply and fixing of all UPVC pipe 200mm OD for plumbering as per site requirements with standard practice for all floors including cost and conveyance of all materials to site labour charges etc, complete.

Toilet block;Constructing 457.2 mm x 457.2 mm(1'6" x 1' 6") brick in cm 1.6 prop masonry inspection chambers upto 914.4 mm (3'0") fitted with high weight 457.2 mm x 457.2 mm (1'6" x 1'6") C.I. frame and cover of 20 kg etc. complete.

Toilet block;Supplying and fixing of European type white/coloured glazed WC 1st quality ISI mark confirming to IS:2556-part-3-1981 with "P" or "S" trap Hindware/Paryware/Netcer-ISI Mark as aproved by Engineer-in-chef with necessary CI Brackets and wooden gutties, fixed in the masonary with required size nails trap of water closet shall be encased in CC (1:2:4)6'' alround well above the joint, to stop leakage at the joint including cost and conveyance of all materials and labour charges, overheads & contractors profit complete for finished item of work

Toilet block;Supplying and fixing 580mm x 440mm long Orissa pan white glazed Water Closet 1st quality ISI marked confirming to IS:2556-Part-3-1981 with "P" or "S" trap, ISI marked and providing masonry seat, CC squatting plate and 10 litres capacity single flush PVC low level cistern with internal components fixed on 2 Nos. of teak wood blocks of size 76.20mm x 101.60mm using required size of nails, screws as approved by Engineer-in-charge, 15 mm nominal size CP finish brass angled stop valve screw type with internal /external threaded conforming to IS 8931, 12.70mm PVC connection with brass union nuts CP coated , 31.75mm brass plumber union, P trap or S trap of Indian W.C. shall be encased on CC (1:2:4) 150mm alround well above the joint to stop leakage at the joint etc., complete including cost and conveyance of all materials to site, cost of CC bed, labour charges and seigniorage charges, overheads & contractors profit etc., complete for finished item of work.

Toilet block;supply and fixing TV shape mirror with plastic frame of size 609.6mm x457.2mm. Plywood back with NP screws 1st quality including cost and conveyance of all materials to site labour charges etc, complete.

Toilet block;S&F of 15mm brass body premium variety Chromium plated finish bib tap angular shape with wall flanges of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection confirming to IS 8931 and with 7-10 years warranty indian make including cost and conveyance of all materials and labour charges etc complete

Toilet block;Supplying and fixing Indian make Flat Back Wash Hand Basin (HSW/Parryware/ Neycer) 1st quality conforming to IS:2556-Part-4:1972 of size 550mm x 400mm with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Esso or equivalent complete with standard CI brackets including wooden block ,1 No.12.70mm PVC connection with brass union nuts CP coated , 1 No.12.70mm NP bib tap 300 gms Seiko or equivalent including cost and conveyance of all materials to site, labour charges etc. complete for finished item of work

Toilet block;Flooring with Nano polished vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs as per the approved flooring pattern as directed by the Engineer-In -Charge, laying tiles using spacers of 2mm thick, set over a base coat of CM (1:8) prop. 12mm thick using screened sand over CC bed already laid or RCC roof slab , including neat cement slurry of honey like consistancy spread @ 3.3 kgs per Sqm. and jointed neately with white cement paste to full depth mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, tiles, white cement etc., to site (excluding cost of C.C. bed) including cost of base coat and all labour charges for mixing of cement mortar, laying tiles to required slope as directed by the Engineer- in-charge etc.,and overheads & contractors profit complete all taxes except GST for finished item of work. (APSS No.701 & 707)

Toilet block;Painting to new walls with 2 coats of ready mix oil bound washable distemper having of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work

Toilet block;Painting 2 coats of ready mixed Synthetic Enamel in all shades Grade - I / Polyurethane full gloss Enamel (IS - 13213) paints having VOC (Volatile Organic Compound) content less than 30 grams/ Lit of approved brand and shade to give an even shade after thoroughly cleaning and sand papering the surface to remove all dirt and remains , including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. including cost of overheads & contractors profit for finished item of work for:-Painting to Iron work - Synthetic enamel paint to New Iron Work - 2 coats

Toilet block;Plastering with 20mm thick in two coat in 12mm thick in CM (1:3) and 8mm dubara with sponge finished smooth including cost and conveyance of all materials to site, seigniorage charges on all materials,finishing, curing, scafolding and all operational, incidntal and labour charges etc, including cutting grooves whereever necessary etc complete for finished item of work (As per SS 903).

Toilet block;Plastering with 12mm thick in single coat CM (1:3) dubara with sponge finishing including cost and conveyance of all materials like cement, finesand(screened), water, etc., to site, and all other taxes on all materials, and operational, incidental charges and all labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves etc. as directed by Engineer-in-charge, complete for finished item of work

Toilet block;Supply and fixing of doors as per approved drawings with medium teak wood frame of section 100mm x 65 mm with split type fan light of 500mm at the top fixed with 4mm thick pin headed glass using 12mm x 12mm Teak Wood beading and 2 Nos. of 10mm MS Square bars and ISI marked flush door shutter of 30mm thick single shutter with bond wood solid block board type core having cross bands and face veneers, hot pressed bonded with water proof phenol formaldehyde synthetic resin factory made conforming to IS 2202-1991 (Part-I) both sides commercial ply with internal lipping on all sides including cost and conveyance to site of teak wood frame, flush shutter including supply and fixing 6 Nos. MS Z hold fasts of size 300 mm x 40 mm x 5mm including cost of ISI marked Aluminium fixtures of 3 Nos. butt hinges (IS:205) 150mm long , 1 No. aldrop (IS:2681) 300mm long, 1 No. tower bolt (IS:204) of 200 mm x 10 mm dia at top, 2 Nos. 150mm long handles (IS:208), 1 No. door stopper and 1 No. rubber bush including fixing the fixtures to door with required number of screws, bolt and nuts including labour charges for fixing the frame in position, fixing the shutter to the frame, fixing glass in fan light portion etc, including overheads & contractors profit complete for finished item of work as per APSS 1001 & 1002 (The vertical frame of door shall be embedded in flooring for a depth of not less than 10 mm) (1000mm x 2600mm).

Toilet block;Vibrated cement concrete M 20 Grade nominal mix using 40mm , 20mm and 10mm size HBG crushed stone aggregate (Coarse aggregate conforming to table 1000-1 and fine aggregate conforming to table 1000-2), including cost, and conveyance of all materials to site and all labour charges for machine mixing, laying in position,Compacting, Vibrating and curing including all other incidental and all other operational charges of T&P required etc., complete as per MoRT&H Specification 1500,1700, 2200 (5th Revision)

Toilet block;Manufacture supply and fixing of iron grills ventilators including cost and conveyacne of all material with transportation and fixing and all labour charges etc complete

Toilet block;BLD-CSTN-3-7: Plain cement Concrete (1:4:8) (Cement:fine aggregate: coarse aggregate) using 40 mm size HBG crushed metal including coat and coveryance of all materials like cement, sand, coarse aggregate, water etc, to site seigniorage charges on all materials, labour charges for mixing, laying concrete, raming in 15 cm layers finishing top surface to required level curing etc,. complete for finished item of work.

Toilet block;Collection, supply and Spreading of good hard gravel stocking at site for premeasurement and sectioning to chamber, watering, rolling with HRR irrespective of thickess in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental charges, labour charges, hire charges of T&P etc., complete for finished item of work.

Toilet block;Supply of Pre-painted Galvalume Trapezoidal Profile Roofing sheets with 0.50mm thickness, Coating: Alu- Zinc coating AZ150 GSM. Tensile Strength: 550 MPA. Paint coating: Regular Modified Polyester painting. Painting Thickness (Top): 18 to 20 Microns, (Bottom): 5 to 7 Microns. Sheet Width: 1.020, Length: Maximum 12 Meters with Regular Range Colours

Toilet block;Manufacturing, supply delivery and erection of MS rectangular pipes of size 50mm including cost and conveyance of all materials and labour charges etc., complete.

Toilet block;Manufacturing, supply delivery and erection of MS tubular purlins rectangular pipes of size 50mm including cost and conveyance of all materials and labour charges etc., complete.

Toilet block;Masonry work in CM (1:6) prop(cement: screened sand) in superstructure with fly ash cement/lime solid blocks of size 290mmx225mmx140mm from approved source having minimum crushing strength of 50 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, etc., complete for finished item of work.

Toilet block;R.R stone masonary in C.M (1:6) using H.B.G stones including cost and conveyance of all materials and water to work site and all operational,incidental ,labour charges such as mixing mortar , constructing masonary, curing etc complete for finished item of work.

Toilet block;Providing Vibrated Cement Concrete (1:5:10) mix using 40mm size HBG crushed stone aggregate and fine aggregate conforming to table 1000-2 of MoRT&H including cost, conveyance of all materials to site and labour charges, centering, machine mixing, laying, Vibrating, curing etc., including all other incidental and operational charges of all T&P etc., complete for finished item of work as per MoRT&H specification 1500,1700, 2100 (5th Revision) and as directed by the Engineer-in-Charge for base coarse below CC Pavement.

Toilet block;RBR- FNDN-2 Collection , supply and filling of HBG Stone chipes 2.36mm and below spall from approved quarry to work site and stocking at work site to dept guage for premeasurements including cost and conveyance of all materials and labour charges etc., complete as per standard specification clause 305.39 MORD & 304 MORTH

Toilet block;Earthwork in excavation for structures as per drawing and technical specifications including setting out construction of shoring and bracing removal of stumps and other deleterious material and disposal up to a lead of 50m, dressing of sides and bottom and back filling in trenches with excavated suitable material asper technical specification.