Municipality Tender

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Manufacture, supply, & delivery of Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in 6 M.) 10.0kg/sqcm (SDR 13.6) OD 63mm

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Supply of ............ WPSC (Weather Proof Single Core) ISI mark Alluminium Wire. Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Nakoda / Payal / Finecab / Gemini / Vimal / Suncab / Stanjo / Rajnigandha / Orbit / Airson / Beljin / Savera Champion / Rhino / Pawancab ELEC-1.6.1 (a) 10 sq.mm.

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Supply of 3 Core ........... Flat Copper cable of ISI for Submersible Motors. Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Payal / Finecab / Gemini / Vimal / Suncab / Delton / Ollvin / Airson / Stanjo/ Nakoda / Beljin / Savera Champion / Rhino / Pawancab ELEC-1.6.4 4 sq.mm.

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Supply and Transportation of control panel for three phase submersible motors above 5 HP up to 7.5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches, CTS, 32A TP MCB, Single phase preventor,suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.. ELEC-5.10.3

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Supply and Transportation of star rated 7.50 HP 12-16 StageThree phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Flowell / Waterman / Ellen / Kirlosker / Samudra ELEC-5.6.2 (f)

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Supply and Insertation of 180 mm dia PVC casing pipe of 6Kgcm2 for potable water supplies conforming to IS :4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive oftransportation to the sub-divisional stores anywhere in TG excluding Taxes.including cost and convayance of all mateterials etc., complete

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Drilling of 165mm dia bore well by Down the Hole Hammer drilling in all type of rock formation i.e hard rock semihard rock, secondary rocks, soft formation to a depth as recommended by the Geologist of the Department and drilling in over burden to suit insertation of 180mm OD PVC casing pipe of 6Kgs/cm2ISI brand PVC pipes confirming to relevant IS specification for PVC pipes including cost of isertation casing pipe and any other relevant materials required up to the depth as directed by department including cost of transportation of rigs and supporting vehicles and measuring discharge using V notch, collection of rock samples at very 9.14 mtrs or change in formatiion crew chargesk, flxing well cap flushing charges, costof consumable and all other charges includingflxing of well required complete but excluding cost of PVC casing pipe. Theentire work has to be done to the satisfaction of deparmental authorities and as per IS 2800 part I & II,1979

Drilling of Borewell and 7.50HP motor with all accessories at GS Corner in ward no.3;Item Detailed Specification Description