Municipality Tender

Lights;Fabrication and erection of 14SWG CRCA sheet steel enclosure for power control cubicle panel / boxes etc., including cutting, bending drilling, welding and reveting etc., complete with cleaning with 7 tank process and painting with powder coating including cost and conveyance of all materials and labour charges. (size 12"X10"X10").

Lights;Supply and transportation of 150 W +/-10% (>=15000 Lumens) LED Flood light Luminaire made of pressure die cast aluminum housing with powder coated, having toughened glass cover, Suitable lens on LEDs, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66 ) protected, wide operating voltage range , P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates.LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA./ Capart / Fortune Arrt / FIEM / Arraystorm / GM / Goldmedal / Panasonic / Silicon / Leksa / Orient / HPL / Valmont / Transrail LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs

Lights;Earth work exacavation with a approximate quantity of 4.0 Cum for errection of 12 Mtrs high mast and refilling with a quantity of 0.53 Cum of PCC 1:4:8, 1.50 Cum M 20 grade concrete and (80 Kgs) reinforced steel of 12mm / 10mm / 8mm, Soil bearing capacity of 10 T/Sqm, Anchor plate with cost and conveyance of all above materials including labour charges for errection of High Mast and Carraige etc complete including soil testing.

Lights;Fabrication, supply and fixing of luminaire carriage, made with 50mm dia ALS 'B' class pipe, moulded to 4 feet dia ring wheel, and 40min dia M5 support proces on 4 sides inside the wheel and necessary size of M.S pole cap for fixing the ring wheel on the M5. pole for fixing loodlight and gear box and Base plate of size 0.30.360.012 mm with suitable nut & bolts and painted with Red Oxide and Aluminium paint including cost & comvevance of all materials etc...complete

Lights;Fabrication, supply and transportation of all sizes swaped poles up to siteconfirming to 15 2713/1980 specifications. The pole should bepainted with primary coat of red oxideand black bituminous paint up to groundlevel with base plate of stre (1.60 mx0.60 m 12 mm including cost of allmaterials etc. complete (Rate per K. G)