Municipality Tender

Borewell;Supply, Transportation and fixing of 50 mm dia 90 degree bend with length of 20cm (Center to face) galvanised GI bends heavy duty with threaded at both ends for installing the pump set including cost and conveyance of all materials, taxes etc., complete

Borewell;Supply and delivery of 25 mm Nominal Bore GI Pipe medium Grade properties & weight as per IS 1239 with GI fittings including the cost of pipe & its fittings & labour charges complete

Borewell;Labour Charges for fixing of 5.00 HP submersible motor pumpset including cost of all men and materials etc., complete

Borewell;Supply and Transportation of control panel for single phase submersible motors up to 3 HP @ 220V 50Hz operating range between 80 to 240V including supply and fixing of Direct - on - Line LTLK / SIEMENS/ CROMPTON make Volt meter and Ammeter with starting and running capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete.

Borewell;Supply and Transportation of star rated 3 HP Three phase ISI submersible motor pumpset suitable for 6" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi including cost of material etc complete

Borewell;Manufacture, supply, & delivery of Polyethylenep pipes (PE-100 Grade) for water supply conforming to IS 4984 2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.) 32 mm dia

Borewell;Manufacture, Supply and Delivery of 140 MM Dia 6 KG/CM2 Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Excise duty and Sales Tax etc.

Borewell;Total depth drilling 165mm / 61/2" dia and inserting total depth 140mm dia PVC casing pipe.Drilling of 165mm (6 1/2) dia borewells in all formations entire/total depth as desired by the department and reaning the bore well to insertion of suitable dia PVC casing pipe of 6 kg/cm2 and any other relevant material required up to the depth as directed by the department including cost of transportation of rigs and supporting vehicle from village to village and bore development (flushing the bore well at an average pressure of 100PSI/conducting yield test ,crew charges, cost of consumable and all other charges required complete but excluding taxes ,cost of PVC casing pipe and the entire work has to be done to the satisfaction of department authorities and as per IS 2800part I&II 1979 any where in Khammam district where particular places recommended by the Geologist and work carried out under directions of the department officials.