Municipality Tender

cc road Drainage;Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum pressure 0.7 - 0.8 atmospheres as per the standered procedure floating with power floater, mechanical trawelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc., complete for finished item of work as directed by Engineer-in-charge of the work. (As per EE, Saroor Nagar, Circle-5, GHMC T.S.No.104/2018-19 Dt:27.07.2018)

cc road Drainage;RBR-CCPV-5: Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M20design mix (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 21- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

cc road Drainage;RBR- SBBS-11B Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

cc road Drainage;RBR-EECD-16-ii: Loosening of the ground upto a level of 300mm below the subgrade level, watered, graded and compacted in layers to meet reqirement of Tables 300.1 and 300.2 for subgrade construction as per Techinal Specification Clause 303.5.2 MORD / 305 MORTH

cc road Drainage;For extra depth of each 0.10 Mts with 0.90m dia x 0.90m depth manhole

cc road Drainage;Construction of sewer circular conical manhole as per type design using flyash Bricks of size 225 x 10 x 6 cms having minimum Crushing strength 75 Kgs Per Sqm as per IS:12894-1990 - CLASS - 7.5 using Sulphete resisting cement in CM (1:3) prop; including CC (1:4:8) bed for foundation and of M15 (1:2.5:5) prop. using 20mm HG metal for benching and channels, inside plastering with 20mm thick using Sulphete resisting cement in CM (1:3) prop; and outside plastering with 20mm thick using OPC in CM (1:3) prop; the foundation concrete in CC (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block / masonary wherever necessary including finishing the gap with CM (1:3) prop. on both the sides including excavating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (HD-20) and PVC encapsulated steps including cost & conveyance of all material, labour and all other incidental and operational charges etc., complete. 0.90m dia x 0.90m depth

cc road Drainage;For extra depth of each 0.10 Mts with 0.90m dia x 0.90m depth manhole

cc road Drainage;Construction of sewer circular conical manhole as per type design using flyash Bricks of size 225 x 10 x 6 cms having minimum Crushing strength 75 Kgs Per Sqm as per IS:12894-1990 - CLASS - 7.5 using Sulphete resisting cement in CM (1:3) prop; including CC (1:4:8) bed for foundation and of M15 (1:2.5:5) prop. using 20mm HG metal for benching and channels, inside plastering with 20mm thick using Sulphete resisting cement in CM (1:3) prop; and outside plastering with 20mm thick using OPC in CM (1:3) prop; the foundation concrete in CC (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block / masonary wherever necessary including finishing the gap with CM (1:3) prop. on both the sides including excavating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (HD-20) and PVC encapsulated steps including cost & conveyance of all material, labour and all other incidental and operational charges etc., complete. 0.90m dia x 0.90m depth

cc road Drainage;PHE-LRCS-6: Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters excluding cost of rubber rings as per BIS No. 783/1985 - 600mm dia

cc road Drainage;MANUFACTURE, SUPPLY AND DELIVERY OF 600MM DIA R.C.C. SOCKET AND SPIGOT NP-3 PIPES CONFORMING TO B.I.S. 458/2003 EX-FACTORY (RATE PER METER OF EFFECTIVE LENGTH) INCLUDING RANSPORTATION,TAXES & DUTIES.( NON PRESSURE)

cc road Drainage;PHE-LJSW-13: Supply, Lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and Spun yarn including cost and conveyance of pipe. (Reference to specifications BIS No. 6530/72) 300mm dia

cc road Drainage;PHE-LJSW-13: Supply, Lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and Spun yarn including cost and conveyance of pipe. (Reference to specifications BIS No. 6530/72) 200mm dia

cc road Drainage;Earthwork in excavation for pipeline trenches as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1 -Manual means)

cc road Drainage;Cutting openCC road surface (as well as asphalt concrete upto 75 mm thick ) including water bound macadam and stacking of excavated materials for pipe line trench work. as directed by the departmental officers.