Municipality Tender

Development of Nallacheruvu Bund;Elliptical Machine Providing & fixing Cross Trainer made from G.I. pipe Dimensions:(L×W×H)=1200×750×1700mm 1. Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD 2. Foundation Plate-M.S round plate of Ø 220 mm & 10 Mm Thickness 3. Paddle Vertical support- Ø 48 mm OD "B" class G.I. Pipe 4. Handle- Ø 33 mm OD "B" class G.I. Pipe dually bending design 5. Handle- Ø 33 mm OD "B" class G.I. Pipe dually bending design 6. Footrest-cast iron 320×130×2 mm thickness of and GI plate of 305×130×2 mm 7. Top closing cap-dome shaped by SS material 8. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand 9. Bearing Bushes-Ø 48 mm, Ø 60 mm & Ø 75 mm OD seamless Pipe 10. Bearing bush closing cap- SS material Handle Bars- High Quality Grip Rubber Ø 46 mm OD. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

Development of Nallacheruvu Bund;Rowing Machine Rowing Machine Providing and fixing Rower made from G.I. pipe Dimensions:(L×W×H)=1100×710×1150mm 1. Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD 2. Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness 3. Handle- Ø 33 mm OD "B" class G.I. Pipe Angle between handle and horizontal 4. Remaining frames- Ø 42 mm OD "B" class G.I. Pipe 5. Seat-320×300 mm×2 mm thick with corner fillet for safety 6. Special feature: Ceiling with SS Seats & SS caps to prevent from rust and water Hence it is not effect to bearings 7. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand Bearing Bushes-Ø 60 mm OD seamless pipe Handle Bars- High Quality Grip Rubber. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

Development of Nallacheruvu Bund;Standing Twister Providing & fixing Twister Standing from G.I. pipe. Dimensions:(L×W×H)=1550×1550×1350mm 1. Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD 2. Foundation Plate-M.S round plate of Ø 220 mm & 10mm thickness 3. Seat plate support - Ø 60 mm OD "B" class G.I. Pipe 4. Standing ring- Ø 33 mm OD "B" class G.I. Pipe made by rolling 5. Special feature: Ceiling with Aluminum Seat to prevent from rust and water. Hence it is not effect to bearings 6. Standing ring support - Ø 33 mm OD "B" class G.I. Pipe 7. Remaining Frame ? Is made by Ø 60 mm OD "B" class G.I. Pipe 8. Standing plate- Ø 300 OD × 5 mm thick M.S plate 9. Handle- Ø 33 mm OD "B" class G.I. Pipe made by rolling Top closing cap-dome shaped by SS material. Bearing-Deep Grooveé Self Aligning Ball. Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Coating-Best quality of powder coating 80- 100 microns thickness. Hardware-Grade 4.6 galvanized. Maximum loading weight-360kg and only three persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

Development of Nallacheruvu Bund;Legg Press Providing and fixing Leg Press Double made from G.I. pipe Dimensions:(L×W×H)=2000×400×1600mm 1. Main Frame-Ø 114 mm OD G.I ?C" class pipe. 2. Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness 3. Seat frame-Ø 42 mm OD "B" class G.I. Pipe 4. Seat-320×300 mm×2 mm thick with corner fillet for safety Special feature: Ceiling with SS Seats to prevent from rust and water Hence it is not effect to bearings 6. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated Reputed brand 7. Bearing Bushes-Ø 60 mm OD seamless pipe Top Closing Caps- SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-240kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product

Development of Nallacheruvu Bund;Sitting Twister Providing & fixing Twister Sitting from G.I. pipe Dimensions:(L×W×H)=1550×1550×1350mm 1. Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2. Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness 3. Seat plate support - Ø 60 mm OD "B" class G.I. Pipe 4. Seating ring- Ø 33 mm OD "B" class G.I. Pipe made by rolling 5. Special feature: Ceiling with Aluminum Seats to prevent from rust and water Hence it is not effect to bearings 6. Seating ring support - Ø 33 mm OD "B" class G.I. Pipe 7. Remaining Frame ? Is made by Ø 60 mm OD "B" class G.I. Pipe 8. Seating plate- Ø 300 OD × 10 mm thick M.S plate 9. Handle- Ø 33 mm OD "B" class G.I. Pipe made by rolling 10. Top closing cap-dome shaped by SS material Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Coating-Best quality of powder coating 80-100 microns thickness. Hardware- Grade ? 4.6 galvanized. Maximum loading weight-360kg and only three persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product

Development of Nallacheruvu Bund;class G.I. Pipe 5. Special feature: Ceiling with SS Foots to prevent from rust and water Hence it is not effect to bearings. 6. Handle- Ø 33 mm OD "B" class G.I. Pipe dually bending design 7. Ring- Ø 42 mm OD of 340 mm diameter ring is used to connect the handle and the Vertical support 8. Leg Movement frame-80 mm×40 mm×3.5 mm thick rectangular pipe 9. Footrest-cast iron 320×155 ×2.5 mm thickness 10. Bracket-6 mm thick laser profile is use to support leg movement frame 11. Top closing cap-dome shaped by SS material 12. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Bearing bush closing caps- SS material. Grips- High Quality Rubber Ø 46 mm OD .Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

Development of Nallacheruvu Bund;Tai Chi spinner Providing and fixing Tai chi Spinner made from G.I. pipe Dimensions:(L×W×H)=1260×1010×1525mm 1. Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD 2. Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness 3. Thai chi Ring Pipe- Ø 42mm OD "B" class G.I. Pipe 4. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. ?? Bearing Bushes-Ø 60 mm OD seamless pipe 6. Top Closing Caps-SS material Handle Bars- High Quality Grip Rubber. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-240kg and only two persons can use at a time. Safety Instructions and Exercise chart ? start & finish position stick on product.

Development of Nallacheruvu Bund;Shoulder Press Providing & fixing Dual pull chair made from G.I. pipe Dimensions:(L×W×H)= 1950×750×2150mm 1. Main centre pipe- Ø 114 mm OD G.I ("C" class) pipe 2. Foundation plate- M.S. round plate of Ø 220 mm & 10 mm Thick 3. Remaining frame-made up of Ø 42 mm OD G.I "B" class Pipe 4. Handle-made up of Ø 42 mm OD G.I "B" class pipe 5. Link-Half round link plate made up of Ø 120 mm OD with 6 mm thickness 6. Connecting link - made up of Ø 48 mm OD G.I "B" class pipe 7. Clamp is made up of 77 mm length with 6m thickness 8. Seat & back rest- 300×300×2mm thick with corner fillet for safety 9. Special feature: Ceiling with SS Seats to prevent from rust and water Hence it is not effect to bearings 10. Handle is connected with frame by 8 mm laser cutting MS profile 11. Stopper rubber is used Top closing cap-dome shaped by SS material Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand Bearing Bushes-Ø 60 mm OD seamless pipe Grips- High Quality Rubber Ø 46 mm OD. Coating-Best quality of powder coating 80- 100 microns thickness. Hardware-Grade ? 4.6 galvanized Maximum loading weight 240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product

Development of Nallacheruvu Bund;Chest Press Providing & fixing Chest press double made from G.I. pipe Dimensions:(L×W×H)= 1950×750×2150mm 1. Main centre pipe- Ø 114 mm OD G.I ("C" class) pipe 2. Foundation plate- M.S. round plate of Ø 220 mm & 10 mm thick 3. Remaining frame-made up of Ø 42 mm OD G.I "B" class pipe 4. Handle-made up of Ø 42 mm OD G.I "B" class pipe 5. Link-'V' link plate made up of Ø 60 mm OD with 6 mm Thickness 6. Connecting link - made up of Ø 48 mm OD G.I "B" class pipe 7. Clamp is made up of 77 mm length with 6m thickness 8. Seat & back rest- 300×300×2mm thick with corner fillet for safety 10. Special feature: Ceiling with SS Seats to prevent from rust and water Hence it is not effect to bearings Handle is connected with frame by 8 mm laser cutting MS profile 11. Stopper rubber is used. Top closing cap-dome shaped by SS material. Bearing- Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand Bearing Bushes-Ø 60 mm OD seamless pipe Grips- High Quality Rubber Ø 46 mm OD. Coating-Best quality of powder coating 80- 100 microns thickness. Hardware-Grade ? 4.6 galvanized Maximum loading weight 240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

Development of Nallacheruvu Bund;Legg lift Providing and fixing Leg Press Double made from G.I. pipe Dimensions:(L×W×H)=1000×620×910mm 1. Main Frame-Ø 114 mm OD G.I ?C" class pipe 2. Foundation Plate-M.S round plate of Ø 220 mm& 10 mm thickness 3. Handle- made up of Ø 42 mm OD "B" class G.I. Pipe 4. Seat frame-Ø 42 mm OD "B" class G.I. Pipe 5. Seat-300×300 mm×2 mm thick with corner fillet for safety 6. Special feature: Ceiling with SS Seats to prevent from rust and water Hence it is not effect to bearings 7. Leg Frame- Ø 42 mm OD "B" class G.I. Pipe 8. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated Reputed brand 9. Bearing Bushes-Ø 60 mm OD seamless pipe Top Closing Caps-SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware- Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product

Development of Nallacheruvu Bund;Two Pillar Multiplay Station 1. Platform:- a. Material:- Checkered Plate with anti-skid surface on top. b. Thickness:- Minimum thickness of 3-5 mm and side flanges of 5-8 mm thickness. c. Size:- 40 x 40inch d. Others:- Ribbed structure on bottom side. e. Shape:- Square. f. Brazing Frame:- ISA 25x25x5mm or ISA40x40x5mm thick and ISF 40x5mm thick which is galvanized and then duly Powder Coated. h. Vertical Pipes:- 80NB GI pipes should be used of Medium Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 2. Double Wave Slide :- a. Size:-9ft3inch Slide b. Material:- Wave Slide Chute is made up of FRP. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The landing of the slide is supported by stand made up of 25NB pipe and 5mm thick MS plate with GI plating. 3. FRP Spiral Slide Slide :- a. Size:- 5ft Slide b. Material:- FRP Spiral Slide Chute is made up of FRP. The chute has its end such as it causes safe landing of the child. The landing portion is horizontal with respect to the ground. The landing of the slide is supported by stand made up of 114mm pipe and 3mm thick MS plate with GI plating. 4. FRP Canopy Mushroom :- The canopy is made of FRP (Fiber Reinforced Plastic) with a minimum thickness of 2-3 mm. 5. Two Seater Swing Swing frame 76mm Pipe used 10ft long.The chain is made from 8mm thick galvanized chain. FRP Seating The frame is made from 50 x 3mm Plat Patty. The chain is over-hanged with the help of Heavy Duty Hinjuice.. 6.Two Seater See Saw: Two Numbers Seats Made With FRP Fiber Seats and Fitted Boath Ends of 76mm Dia Pipe Length 8ft with Bolts and Nuts Both fitted on Horizontal pipe 2.6Length and 76mm Dia U Shaped ( reverse) with clamps with fiber sheets Length x Width x Height : 2438mm x 914mm x 914mm 7. MS Step Ladder :-a. Size:- 5 Ft b. Material:- MS with a minimum thickness of 3-5mm. Ribs are provided at defined distance to improve strength as well as aesthetics of the bridge.. c. Suitable Railiing Made up 33OD GI Pipe 8. FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required color to the product. Thickness of the FRP material varies from 3 mm to 5 mm as per the product. The FRP material should be tested for abrasion resistance & UTS (ultimate tensile test). 9. Pipes:- All metal pipes should be used of Heavy Duty ('B' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 10. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. 11. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 12. All open ends of pipe been closed by GI / PVC caps for user safety against entrapment. 13. Certificate: ISO9001:2015 14. Color: Multicolor for optional or customized & As per RAL shade. 15. Packaging: Safety 3 layer ackaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Play Equipment Size :L x W x H :7010mm x 5486mm x 3962mm.

Development of Nallacheruvu Bund;Jungle Gym 1) Main frame Structure: Main pipe 42.5mm OD support pipe hinged over with 25mm outer dia pipes. 2)Pipes: All metal pipes should be used heavy duty (C class) of TATA/Jindal make only with hot dipped galvanized pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 3) Welding: Welding shall be done with robotic welded and Prior to finishing all welded joints should scalloped as necessary and welded to an approved MIG process should dressed of removing all sharp edges and burrs. 4) powder Coating: it will be done with pure polyester raw material. Dry film thickness maintained within the range of 50- 70microns. 5) Colour: Multi colour for optional or customized & as per RAL shade. 6) All open ends of pipe been closed by GI caps for user safety against entrapment. 7) Packing: Safety 3-layer packaging like 1st EPE foam 2nd HDPE film an d3rd is Stretch wrap. 8) Certificate: ISO9001:2015

Development of Nallacheruvu Bund;Four Seater See Saw 4 No?s Seats made with FRP Fibre Seats and fitted both ends of 80 NB Dia Pipe length8 Ft with Bolts & Nuts and both fitted on Horizontal Pipe 3? length and 76 mm Dia?U? shape (rivers) with clamps with fibre Seats. Length : 2438 mm Width : 1524 mm Height : 914 mm 1) Centre Main Frame Structure: - 80NB hot dip galvanized pipes conforming to IS 1239. 2) See saws: - 2 Nos of See saws made up of 50NB & GI pipe conforming to IS 1239 with proper holdings. 3)FRP Seats: - 4 nos. of FRP Seats 4)FRP (FIBER REINFORCED PLASTIC):- All the Fiber Reinforced Plastics (FRP) materials are processed by the hand laid process which is considered to be the best of its type. International quality of Gel coats which is duly mixed with U.V stabilized pigment to give the required colour to the product. Thickness of the FRP material should not less than 5 mm as per the product. The FRP material should be tested for abrasion resistance & UTS (ultimate tensile test). 5) Pipes: - All metal pipes should be used of Heavy Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 6) Powder coating: - It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50- 70 microns. It is tested for adhesion test (According to ASTM-D-3359) with the help of cross hatch cutter instruments. 7)Nut and Bolts: - Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 8) Bearing: Bearing is self-lubricated made of SKF/NTN/ NACHI make shall be provided for smooth & trouble free movement. 9) All open ends of pipes been closed by GI caps for user safety against entrapment. 10) Color: Multicolour for optional or customized & As per RAL shade. 11) Packaging: Safety 3-layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. 13)Certificate: ISO9001:2015.

Development of Nallacheruvu Bund;Rainbow Ladder 1)Rainbow Ladder:2 no?s 48mm Dia GI Pipes bent into semi- Circle shape with the distance of 24? and 25 mm Dia Pipes welded in between the two Pipes like Ladder Type 2) Pipes:- All metal pipes should be used of Heavy Duty ('C' Class) of TATA/Jindal make only with Hot Dipped Galvanized Pipes conforming to IS 1239 (Part 1) with GI thickness not less than 60micron. 10. Powder coating:- It shall be done with pure polyester raw material. Dry film thickness maintained within the range of 50-70 microns. It is tested for adhesion test (According to ASTM-D3359) with the help of cross hatch cutter instruments. 11. Nut and Bolts:- Galvanized/ S.S./Allen Bolt/Button Head Allen Bolt & Nuts / Nylon Lock Nuts are used with PVC Bolt Caps. 12. All open ends of pipe been closed by GI caps for user safety against entrapment. 13. Certificate: ISO9001:2015 14. Color: Multicolor for optional or customized & As per RAL shade. 15. Packaging: Safety 3 layer packaging like 1st EPE Foam 2nd HDPE Film and 3rd is Stretch wrap. Equipment Size : L x W x H : 3535mm x 609mm x 1524mm

Development of Nallacheruvu Bund;Sand filling for play area

Development of Nallacheruvu Bund;BLD-CSTN-2-11 : Plain Cement concrete (M20 Nominal Mix) :using 20mm graded metal using concrete mixer including cost and conveyance of all materials like cement, sand, coarse aggregate water etc., to site , seigniorage charges on all materials, labour charges , for mixing , laying, concrete , ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work with nominal reinforcement

Development of Nallacheruvu Bund;RBR-EECD-15: Construction of earthen shoulders with approved material obtained from roadway cutting with all leads and lifts including pre-watering of soil, spreading soil, breaking clods, sectioning, grading and consolidation with 8 to 10 Tonnes Vibratory Road Roller @ OMC to meet requirement of table 300-2 of MoRT&H, including all hire and operational charges of T&P etc., complete for finished item of work as per MoRT&H specification 305 (5th revision).