Municipality Tender

UGD;Construction of sewer Circular conical manhole as per type design using flyash Bricks of size 225 x 10 x 6 cms having minimum strength 75 Kgs per Sqm as per IS: 12894-1990 - CLASS - 7.5 in CM (1:3) prop: including CC (1:4:8) bed for foundation and of M15 (1:2.5:5) prop. using 20mm HG metal for benching and channels, inside pastering with 20mm thick using Sulphete resisting cement in CM (1:3) prop: the foundation concrete in Cc (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block/ masonary wherever necessary including finishing the gap with CM (1:3) prop. on both the sides including excvating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (HD-20) and PVC encapsulated steps including cost & conveyance of all material, labour and all otehr incidental and operational charges etc., complete. 1.2*1.65

UGD;Total Additonal man hole depth 0.1M Depth

UGD;Construction of sewer Circular conical manhole as per type design using flyash Bricks of size 225 x 10 x 6 cms having minimum strength 75 Kgs per Sqm as per IS: 12894-1990 - CLASS - 7.5 in CM (1:3) prop: including CC (1:4:8) bed for foundation and of M15 (1:2.5:5) prop. using 20mm HG metal for benching and channels, inside pastering with 20mm thick using Sulphete resisting cement in CM (1:3) prop: the foundation concrete in Cc (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block/ masonary wherever necessary including finishing the gap with CM (1:3) prop. on both the sides including excvating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (HD-20) and PVC encapsulated steps including cost & conveyance of all material, labour and all otehr incidental and operational charges etc., complete. 0.9*0.9

UGD;Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Spun / Vibrated Cast(Reinforced) Socket and Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubberring) including transportation but excluding taxes. the Rubber Rings shall be tested at the factory premises conforming to B.I.S. 5382/1985.

UGD;PHE-LRCS-6: Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985

UGD;MANUFACTURE, SUPPLY AND DELIVERY OF 450 DIA R.C.C. SOCKET AND SPIGOT NP-3 PIPES CONFORMING TO B.I.S. 458/2003 EX-FACTORY (RATE PER METER OF EFFECTIVE LENGTH) INCLUDING TRANSPORTATION,TAXES & DUTIES.(PRESSURE)

UGD;BLD-CSTN-2-7 - (15) ; Earth work excavation in Hard rock (blasting prohibited)-Upto 3 m depth for pipeline trench and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

UGD;Earthwork in excavation for pipeline trenches as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1 -Manual means)