Municipality Tender

Drilling of Borewell and fixing of Motor;Supply and Transportation of control panel for three phase submersible motors up to 5 HP @ 415V 50Hz operating fitted with supply and fixing of Direct - on - Line LTLK /BCH/ SIEMENS / CROMPTON make, 0-500V Volt meter and 0-30A Ammeter, Indication lamps, selector switches,CTS, 32A TP MCB, Single phase preventor, suitable contactor to with stand low voltage pick up and high voltage resistant, with ISI marked capacitors assembled with ISI mark contactors and fitted with Legrand make ISI mark MCB etc., complete. 1129 ELEC-5.10.2

Drilling of Borewell and fixing of Motor;Motor Cover made with GI sheet of 18SWG for protection from rain complete (Bore Cover)

Drilling of Borewell and fixing of Motor;Stay clamp with bolts and Nuts ELEC-9.1.18

Drilling of Borewell and fixing of Motor;Supply of 3 Core 6.0 Sqmm Flat Copper cable of ISI for Submersible Motors. Makes : Finolex / RR Kabel / Havells / KEI/L&T(ELEC-1.6.3) 280d

Drilling of Borewell and fixing of Motor;Supply of 10 Sqmm WPTC (Weather Proof Twin Core) ISI mark Alluminium Wire.Makes : Polycab / GM / Million / V-Guard /Gold Medal / Kundancab / HPL / RPG /Nandicab / Nakoda / Payal / Finecab /Gemini / Vimal / Suncab / Stanjo /Rajnigandha / Orbit / Airson / Beljin / Savera Champion / Rhino ELEC-1.6.2, 276 b

Drilling of Borewell and fixing of Motor;Supply and Transportation of 2.00HP 25 Stage single phase ISI submersible motor pumpset suitable for 4" Bore well. Makes: Texmo / CRI / KSB / Aryan Varsha / Lubi / Falcon, 1062 e

Drilling of Borewell and fixing of Motor;Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.)SSR Pg. NO 427 OD - 63mm, 10 kg/sqcm (SDR13.6)

Drilling of Borewell and fixing of Motor;Supply of 180mm dia /6kg/cm2 PVC casing, pipe including all taxes etc., complete.SSR Pg NO 479

Drilling of Borewell and fixing of Motor;Drilling of the tube wells by down the hole hammer drilling to a finished dia of (6½ ? ? dia in all formations suitable for down the hold hammer drilling such as medium hard rock to hard rock formation all consolidated formation etc., and remaining the bore to suit insertion of PVC casing pipe etc., including the insection of 180mm. PC casing pipe any other relevant materials required up to depth as defected by the departmentally officers, but excluding cape including transportation of drilling rig to work spot and including bore development (flushing the Bore well) and on average pressure of 100 PSI conducting yieldest crow charges, cost of all other charged on fixation of pipes assembly complete. Depth and as stipulated in SCHEDULE-A for any where in A.P. the entire work should be carried out as per 2800 Part-II 1970-060 mts.