Municipality Tender

CC road;Plain Cement Concrete (1:4:8) (cement: fine aggregate Coarse aggregate) under bed using coarse aggregate 40mm size machine crushed granite from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, including seigniorage charges, sales & other taxes on all materials and including all charges for machine mixing, laying concrete in under bed, ramming in 15 em layers finishing top surface to the required level curing etc.. complete for finished item of work. (APSS No. 402)-BLD-CSTN-3-5

CC road;Construction of un-reinforced, dowel jointed at esparsion and construction joint only, plain cement concrete pavement, cum thicknews per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregatos conforming to IS: 383, maximum in a concrete miser of not less than 0.2 cum capacity and appropelate weigh hatcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges. steel plates including levelling the formwork as per drawing) spreading the concrete with sholvela, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints. applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/ culvert and construction jointi, admixtures as approved, curing of concrete slabs for 21-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

CC road;Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum presssure 0.7-0.8 atmospheres as per the standard procedure floating with power floater, mechanical travelling finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc. complete for finished item of work as directed by Engineer-in-charge of the workas( approved rate)