Municipality Tender

Laying of CC Road from Elecrtical Pole No.287 to Electrical Pole No.260 in Nagarjuna Hills Colony, P;TBSC-T.I-15 Saw cut joints for freshly laid concrete pavement including all material and labour charges 2-3MM

Laying of CC Road from Elecrtical Pole No.287 to Electrical Pole No.260 in Nagarjuna Hills Colony, P;Vaccum drying of freshly laid concrete floor using 100 % air tight suction mat of suuitable size and length , vaccum pump to maintain vaccum pressure 0.7 to 0.8 atmospheres as per the standard procedure, floating with power floater, mechanical travelling, finishing with sound edgesand corners, including hire and operational charges of machinery, labour, fuel etc., complete for finished item of work as directed by Engineer - in- charge of the work

Laying of CC Road from Elecrtical Pole No.287 to Electrical Pole No.260 in Nagarjuna Hills Colony, P;RBR-CCPV-6: Construction of un-reinforced, dowel jointed, plain cement concrete pavement of M 30 Grade over a prepared sub base with 43 grade cement @ 350 kg per cum, coarse and fine aggregate conforming to IS 383, maximum size of coarse aggregate not exceeding 25 mm, mixed in a batching and mixing plant as per approved mix design, transported to site, laid with a fixed form or slip form paver, spread, compacted and finished in a continuous operation including provision of contraction, expansion, construction and longitudinal joints, joint filler, separation membrane, sealant primer, joint sealant, debonding strip, dowel bar, tie rod, admixtures as approved, curing compound, finishing to lines and grades as per drawing and Technical Specification 602 MORTH.

Laying of CC Road from Elecrtical Pole No.287 to Electrical Pole No.260 in Nagarjuna Hills Colony, P;RBR- SBBS-11B Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Laying of CC Road from Elecrtical Pole No.287 to Electrical Pole No.260 in Nagarjuna Hills Colony, P;RBR-EECD-8(c) : Earthwork excavation for road way in soil by Manual means including cutting and pushing the earth to side of embankment upto a lead of 100 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete for finished item of work for trench cutting as per MOR&H specification No.301 and as directed by the Engineer-in-Charge- (Hydraulic Excavator)