Municipality Tender

UGD;Constructing 457 2 mm x 4572 mm (16 x1'6") brick in CM 1.6 prop Masonry Inspection chamber up to 914.4 mm (30") and fitted wolth light weight frame and cover etc., Complete

UGD;VDCC ROADEarthwork in excavation for roadway in soil and drains as per drawing and technical specifications Clause 305 1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for where depth is less than 1.50 times the width (RBR-FNDN-1)

UGD;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.22 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 21- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

UGD;Vaccum drying of freshly laid cement concrete floor using 100% air tight suc mat of suitable size and length, vaccum pump to maintain vaccum presssure 0.8 atmospheres as per the standard procedure floating with power floater, mechanical travelling finishing with sound edges and corners, includir hire and operational charges of machinery, labour,fuel etc. complete for finishe item of work as directed by Engineer-in-charge of the workas( per quotation)

UGD;Saw cut joints for freshly laid concrete pavement including all material and labour charges(Groooves 2-3mm) (as per quotation