Municipality Tender

Path Holes;RCC M- 20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering.

Path Holes;Cutting road surface including stacking of excavated materialsfor pipe line trench work(Cutting C.C.Road Surface)

Path Holes;Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length, vaccum pump to maintain vaccum pressure 0.7-0.8 atmospheres as per the standard procedures floating with power floater, mechanically travelling,finishing with sound edges and corners including hire and operational charges of machinery,labour,fuel etc., complete for finished item of work as directed by Engineer-in-charge of the work( As per Quotation ).

Path Holes;Cement Concrete Pavement Construction of un-reinforced, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification

Path Holes;BLD-CSTN-2-8 (16): Filling with dust in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309&310)

Path Holes;Excavation for roadway in soil using manual means for carrying of cut earth to embankment site with initial lift of 3 mts and lead up to 50m as per Technical Specification Clause 302.3 MORD.

Path Holes;Cutting road surface including stacking of excavated materialsfor pipe line trench work(Cutting C.C.Road Surface)

Path Holes;Carting of surplus excavated earth from the site to a distance suitable including loading, unloading charges, cost & conveyance, dumping, labour charges, all leads & lifts and other incidental and operational charges etc., complete

Path Holes;Plain Cement Concrete (M15)- Nominal Mix (1:2.5:5) Prop with 40,20,10 mm metal hand mixing including cost and conveyance of all materials and labour charges etc., complete for Concrete Bed.In Vent Portion(0.05+0.05)/2=0.05

Path Holes;Plain Cement Concrete (M10)- Nominal Mix (1:3:6) Prop with 20mm metal hand/machine mixing including cost and conveyance of all materials and labour charges etc., complete for Walls.

Path Holes;BLD-CSTN-3-5 (22) P.C.C. (1:4:8) proportion nominal mix (cement : fine aggregate: coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all mate-rials like cement, sand, coarse aggregate, water etc. all operational, incidental, and labour charges such as mixing, laying and ramming finishing top surface, curing concrete, etc,.. complete for finished item of work Foundations.

Path Holes;Supply and Filling with 2.36mm and below HBG stone Chips as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH including cost and conveyance of all materials and labour charges etc., complete for finished items of work.

Path Holes;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for pipe line trenches & building foundations where depth is less than 1.50 times the width (RBR-FNDN-1)

Path Holes;Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, removal of stumps and other deleterious material and disposal upto a lead of 50 m, etc complete for pipe line trenches & building foundations where depth is less than 1.50 times the width (RBR-FNDN-1)