Municipality Tender

CH;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Column Footings

CH;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Plinth Beam

CH;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Columns

CH;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Brace Beams

CH;Collection and filling with gravel (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc. complete for finished item of work (APSS No.309 & 310)

CH;BLD-CSTN-3-1 (4)Brick Masonary 2nd class ground moulded or treditional size 23x11x7 Cm in cement mortor 1:6 Prop including cost & conveyance of all materials like cement , sand, bricks, water etc., to site cost of seigniorage charges on all materials, including all albour chargess like mixing cement mortor, scaffoding chargess lift chargess, curing chargess etc., complete for finished item of work.

CH;Plastering with Cm (1:4) 12mm thick with finishing including cost and convience of all men and material labour charges etc., complete finished item of work -

CH;BLD-CSTN-2-19 Supplying,fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded.

CH;Supplying and fixing of double leaf MS tubular gate as per drawing using 75mmx40mm MS tubular pipe alround and Horizontal bottom and vertical 45mmx20mm MS tubular pipe at about 75mm C/c , fixing , arrows , MS hinges , aldrop as per the drawing including cost and conveyance of all materials , labour charges , welding charges , all incidental charges , Painting in two coats with synthetic best enamal paint, overheads & contractors profit etc., complete for finished item of work

CH;BLD-CSTN-10-2 Painting,Priming Coat on NewPlasteredSurface including cost and conveyance of all men and materials etc complete

CH;BLD-CSTN-12-12-(197) Painting in two coats with synthetic best enamal paint of approved quality, colour and shade over a primary coat of white lead to new wood/steel works after the surfaces is throughtly cleaned and scraped, including scaffolding cost of materials and labour charegs etc. complete for finished item of works.

CH;Providing and fixing of Three shutter Sliding Windows made of Galvanized Steel as per IS 513, D quality, galvanized as per IS 277 powder coated with Pure polyester powder and thickness of 0.8 mm for Outer Frame and 0.58 mm thickness for Sliding Shutter Section, with two integrated guide tracks of 12mm width and 24mm deep for provision to slide the Shutter / sash frame and facilitates with a water drain outlet component made of PVC and the shutter frame fitted with 5mm thick plain float glass of reputed make and fixed with EPDM weathering seal resistant accessories and handle made of Aluminium 1 No. per each shutter and including installation of window system at site using anchor fasteners, Silicon sealant applied at the Outer frame corners inclusive of conveyance of all materials accessories, labour charges, and erection at site with complete finished item of work for ii) Centre Shutter Sliding: centre shutter frame made of section of size 20mm x 47mm should be fitted with 5 mm thick plain float glass of reputed make. The supporting guide section of size 15mm x 19mm of 0.58mm thick fixed horizontally at top and bottom of shutter frame and slides along the bottom and top guide tracks made of sections size 24mm x 20mm of 0.58mm thick and 29mm x 20mm of 0.58mm thick and iii) Centre Fly mesh Shutter Sliding: Section for Fly mesh Shutter frame should be of size 20mm x 40mm of 0.58mm thick and fitted with SS mesh (304 Grade). The supporting guide section of size 29mm x 20mm of 0.58mm thick at the bottom and 15mm x 19mm of 0.58mm thick at the top fixed horizontally to the Fly mesh frame and slides along the bottom and top guide tracks made of sections size 20mm x 20mm of 0.58mm and 29mm x 20mm of 0.58mm. including Cost and Conveyance of all Men and materials Etc Complete

CH;Flooring with vitrified tiles set over base cost of cement (1:8) 12 mm thick over C.C. bed already laid or R.C.C Slab, including neat cement of Honey like consistency spread @ 3.3 kgs per Sqm & jointed neatly with pigment of matching shade including cost of all materials like cement sand water and tiles etc., complete including charges, etc., complete for finished item of work

CH;Providing skirting to internal walls to 15cm height /risers of steps with vitrified tileslength equal to flooring stones,set over base coat of CM(1:5)12mm thick with cement slurry of honey like consistency spread at the rate of 3.30kgs per sqm and jointed with white cement paste mixed with pigment of maching shade to full depth,including cost of all materials like tiles,cement,sand and water etc.,complete including seigniorage charges,etc.,complete for finished item of work,but excluding the cost of conveyance of all materials

CH;Flooring with Ceramic tiles set over base cost of cement (1:8) 12 mm thick over C.C. bed already laid or R.C.C Slab, including neat cement of Honey like consistency spread @ 3.3 kgs per Sqm & jointed neatly with pigment of matching shade including cost of all materials like cement sand water and tiles etc., complete including charges, etc., complete for finished item of work.

CH;Dadooing to walls with Glazed colour tiles of any sixe 1st quality set over a base coat of CM (1:3) Prop. 12mm thick and neat Gray cement slurry of Honey like consistency sread at the rate of 3.30 kg of cement per one Square Meter and jointed with neat White cement paste mixed with pigment of matching shade including cost and conveyance of all materials like cement, sand, water, flooring Tiles etc., to site all operational, incidental and alabour charges such as mixing of cement mortar, laying, jointing, curing, lift charges etc., completed for finished item of work (for toilets)

CH;Supply and errecting of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient

CH;Gronolithie Concrete Flooring 20mm thick with (1:1:2) ,using 6mm to 12mm size hard granite machine crushed metal laid over CCbed already laid or RCC roof slab,in alternate panels of sizenot exceeding1.50mx1.50m and finishing the top surface to required smoothness and slopes and thread lining including cost of all materials like cement,metal,sand and water etc,including seigniorage charges,etc.,complete for finished item of work,but excluding the cost of conveyance of all materials

CH;928 TBSC-R.I-37 2) Exterior walls are painted with one coat of primer and 2 coats of exterior emulsion paint .including cost of men and materials etc complete

CH;929 TBSC-R.I-38 3) Interiors are painted with 1+2 coat of O.B.D. 1 Sqm including cost of men and materials etc complete

CH;251 TBSP-E.I-01 Supplying & fixing approved make Indian pattern white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap: 580 mm including cost of men and materials etc complete

CH;278 TBSP-E.V-02 Supplying and Fixing best Indian make soft plastic closing seat and lid for European water closets with rubber or plastic Buffers as per IS 2548-1996 including cost of men and materials etc complete

CH;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part- 4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock etc including cost of men and materials etc complete

CH;468 TBSP-H.I-03 Supply and delivery of 110 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost of materials etc complete

CH;468 TBSP-H.I-03 Supply and delivery of 90 mm dia 3 M Single Socket PVC/SWR pipe - 4 Kg/sq.cm including cost of materials etc complete

CH;536 TBSP-H.II-15 Supply and delivery of 110 mm dia - Door Bend 87.5 Degree - UPVC/SWR cm including cost of materials etc complete

CH;Plain / reinforced cement concrete in substructure complete as per drawings and technical specification clauses 802, 804, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH - including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

CH;Flooring with ceramic tiles, set over base coat of cement mortar (1:8),12mm thick over CC bed already laid or RCC roofslab ,including neat cement slurry of honey like consistency spread @3.3.kgs per sqm &jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement,sand water and tiles etc., complete, including seigniorage charges, etc., complete for finished item of work,but excluding the cost of conveyance of all material

CH;Providing impervious coat to exposed RCC roof slab surface with CM(1:3),20 mm t hick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials,seigniorage charges ,excluding conveyance charges of materials and including all operational,incidental and labour charges for mixing mortar, laying, rendering smooth and threadlining, curing, rounding off junctions of wall and slab etc, complete for finished item of work

CH;Supply, Installation and commissioning approved make floor mounted Anglo Indian wash down EWC conforming to IS:2556 (Part 8)-2004 suit with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber buffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of approved make etc including cost of men and materials etc complete

CH;Supplying and fixing TV shape mirror with plastic frame size 609.6 mm x 457 .2 mm including cost of men and materials etc complete

CH;Constructing 457.2 mm x 457.2 mm (1'6"x1'6") brick in CM 1:6 prop. Masonry. Inspection chamber up to 914.4 mm (3'0") and fitted with light weight 457.2 mm x 457.2 mm (1'6"x1'6") C. frame and cover of 20 Kg.Iincluding cost of men and materials etc complete

CH;S&F premium make CPVC Pipes of 22.20mm OD Pipe - SDR 13.5 including the cost of pipe, required number of connectors such as elbows, tees, couplers, connectors, solvent cement etc., and labour charges complete including cost and conveyance of all materials to site, all operational, incidental , labour charges, etc. complete for finished item of work as directed by Engineer-in-charge

CH;524 TBSC-L.I-05 Supply and fixing of door frame made of hollow extruded PVC section having dimensions of 40 X 57mm with the wall thickness of 2mm +/- 0.2mm duly reinforced with seasoned wood plank at the hinges side. The door frame top 2 corners shall be metre-cut/ welded. PVC DOOR FRAME including Cost and Conveyance of all Men and Materials Etc Complete.

CH;TBSC-L.III-14 supply and fixing of Single panel 30 mm thick PVC door shutters made of rigid PVC extruded hollow section of 20mm X 635 mm with the wall thickness of 1.0mm +/- 0.1mm. The shutter frame is made of 30mm X 79mm including cost and conveyance of all men and material etc complete

CH;Payment to NPDCL for 3Phase Meter Connection

CH;522 TBSP-H.II-01 Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks