Municipality Tender

WideningRoad;Plain /M15 reinforced cement concrete in substructure complete as per drawings and technical specification clauses 802, 804, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH- For Side Walls

WideningRoad;Plain /M15 reinforced cement concrete in substructure complete as per drawings and technical specification clauses 802, 804, 806, 807, 1202 and 1204 MORD and 1500, 1700 & 2200 MORTH- For coping

WideningRoad;Supplying, fitting and placing TMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded

WideningRoad;Providing concrete for VRCC M30 grade using 20mm nominal size graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

WideningRoad;Construction of granular sub-base by providing Grade III with a minimum CBR Value 20 by well graded material of 9.50mm to 4.75mm @66% and 2.36mm below @34%, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method with rotavator at OMC, and compacting with Vibratory Roller 80 to 100 KN to achieve the desired density, complete as per Technical Specification Clause 401 MORD / MORTH.

WideningRoad;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

WideningRoad;Providing and applying primer coat with bitumen emulsion SS-2 (medium setting) on prepared surface of granular Base includign clearing of road surface and spraying primer at the rate of 0.60 Kg / sqm using mechanical means as per Tech. specification No.502 MORTH

WideningRoad;Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion pressure distributor (medium setting) at the rate of 0.20 Kg per sqm on the prepared bituminous / granular surface cleaned with mechanical broom as per Tech. specification No.502 MORTH

WideningRoad;Providing and laying of Dense Graded Bituminous Macadam with 100-120 TPH batch type hot mix plant/ 40-60 TPH drum mix plant using HBG crushed aggregates of Grading - II as per table 500-10 of MoRT&H Specification 505 (5th revision) premixed with bitumen VG-30 grade @ 4.50% of weight of total mixture, transported to site, laid over a previously prepared surface with mechanical paver finisher to the required grade, level and alignment and rolled as per Clauses 501.6 and 501.7 to achieve the desired compaction for finished item of work as directed by the Engineer-in-Charge including hire and operational charges all T&P and all other contingent charges necessary including charges of all materials etc., complete and as per MoRTH specification No. 505(5th Revision)

WideningRoad;RBR-BASC-9: Providing and laying bituminous concrete with 100-120 TPH batch type hot mix plant producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 5.5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MORTH specification clause No. 509 complete in all respects.

WideningRoad;Supplying of hot applied thermoplastic road marking compound, 2.5mm thick including reflectorising glass beads @ 250gms with Reflectorising Glass Beads on Bituminous Surface at 250 gms per sqm area, thickness of 2.5mm is exclusive of surface applied glass bead as per MORTH Section 803.4 and IRC: 35-2015, the material should satisfy the requirements as per MORTH specifications 803.4 and must comply with the following: a) White index for the product should be in the range of 60-70 when measured against standard reference. The applied panel 7/8 number must be submitted for checking up the white index in the department lab. In case the department approves the white index of any vendor, the department engineer may carryout random checking of the applied products at site against the approved panel. In case of any major deviation, beyond acceptance limit, department reserve the right to cancel or reject the total supplied consignment of the said material and will compell the vendor has to replace the full consignment by the desired material as per approved panel at his own cost and additional demurrages may be claimed due to loss of man days (as per the rules of the department). b) Luminance factor of the material should be in the range of 80-85% at 45 degree centigrade as per AASTHOM 249. c) Crack resistance: The applied panel cured for 7 days under ambient condition and then should be tested as per BS3262, Part-1, 1989 and should pass at the range of '0' degree centigrade to '-10' degree centigrade D) Adhesion : Strong E) Softening point: 102 degree centigrade F) Dried film finish : Smooth and uniform G) Night Vision: High as directed by the Engineer-in-Charge and confirming to IS: 164-1961 (1st revision reaffirmed in 1986) and clause conforming to IRC 35-2015 and MORTH Section 803.4

WideningRoad;Providing and fixing Reflective pavement markers(Road studs) made of plastic body moulded from HIPS(Hi-impact polystyrene) or ABS or ASA (Acrylic Strene Acrylonitite) and reflective panels shall consist of number of lenses containing single or dual prismatic cubes capable of providing total internal recflection of the light entering the lens face and conforming the ASTM, BS and complying to guidelines issued by MOST circular no RW/NH-33023/10/97-DO III dt:11-6-1997. The height, width shall not exceed 20mm, 130mm and the area of each retro reflective surface shall not be less than 13Sq.cm and the slope of retro reflective surface shall preferably be 35+/-5 degree to base. Fixing will be without nails and the reflective marker shall be fixed to the road surface using the adhesives and the procedure recommended by the manufacturer and as per para 6.2 of the MOST circular incuding cost and conveyance of all materials, equipement, machinery and labour with all leads and lifts, loading , unloading charges , site clearance etc., ad complete necessary for successful completion of the work as directed by the Engineer-in-Charge.

WideningRoad;Fabrication, Transportation and supply of hot-dip galvanized Octogonal Pole with BSEN - 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 9 Mtrs height Pole having dimensions Bottom 155mm, Top 70mm with 3mm thick, base plate 260 x 260 x 16mm and 4 Nos of M24 x 750mm long 'J' bolts along with template. Makes: BAJAJ / VALMONT / TRANSRAIL.

WideningRoad;Foundation and erection charges with special T&P, for 9.00Mtrs / 10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtr x 0.60Mtrs x 1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance of materials etc.complete.1 no 7277

WideningRoad;Fabrication and erection of 14SWG CRCA (2mm) sheet steel enclosure for power control cubicle panel / boxes etc., including cutting, bending, drilling, welding and reverting etc., complete with cleaning with 7 tank proces and painting with powder coating including cost and conveyance of all materials and labour charges

WideningRoad;Supply and delivery of (300x600x700) Plastic pole box IP 65 protection. Make : Hensel / Sintex / Sadhrish / EPP or equivalent including cost and conveyance of all men and materials

WideningRoad;Supply of 4 SQMM 4 CORE PVC / XLPE Insulated Sheathed Multi Core Bright Annealed Bare Copper Conductor Heavy Duty Industrial Cables for Voltage Grade upto 1100 Volts as per IS: 694:1990 including all transportation charges etc complete. Makes : Finolex / RR kabel / Havells Polycab / RPG / KEI / Gloster / V-Guard / Finecab / SPM / Gemini / Unistar / Windsor / Payal / Fortune Arrt / Avocab / Pawancab / Nakoda / HPL / Sudhakar /Bonton / Ollvin

WideningRoad;Supply and erection of 0-500V Digital Volt meter----- on exisiting panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / L&T /SEIMENS.

WideningRoad;Supply and erection of Analog Volt meter----- on exisiting panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / L&T /SEIMENS.

WideningRoad;Supply and erection of Digital frequency meter on existing panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / L&T /SEIMENS.

WideningRoad;Supply and erection of Digital power factor meter, 3 phase, 4 wire balanced or unabalanced load 5A, 415V of size 96 x 96mm on existing panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / L&T /SEIMENS.

WideningRoad;Supply and erection of L.T. 3phase Digital Multifunction energy meter Class I with LED display for measuring all the parameters (Voltage, Current, Frequency, Power factor, KW, KVA, KWH, KVA, KVAH, KVAR and THD Events) on existing box panel board including connections etc., complete. MAKES : CONZERVE / ELMEASURE / L&T /SEIMENS.

WideningRoad;Supply and fixing of Single phase Electronic energy Meter, 240V AC, 50 HZ as per IS13010 up to 40A range with 200% over load capacity complete with connections etc., complete on the existing board Makes : CONZERVE / ELMEASURE / MECO / HPL / HAVELLS

WideningRoad;ELEC-7.14.9 Supply and fixing of -8 stage APFC Relay with connection etc complete. Makes : L&T / Siemens / EPCOS / Schneider / Elmeasure

WideningRoad;Supply and fixing of 3.0 KVAR Rating capacitor duty contactor Makes : L&T / Siemens / Meher including cost and conveyance of all material etc complete

WideningRoad;ELEC-7.14.12 (1487 a) Supply of MPP type heavy duty capacitor of operating voltage Makes:L&T/Siemens/Schneider/Epcos. not less than 440V of cylyndrical type of 1 KVAR to 2 KVAR 1 KVAR 374.00

WideningRoad;Supply and transportation of 1150 W +/-10% (>=15000 Lumens) LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover,Suitable lens on LEDs, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range P.F > 0.90, System having efficacy >110 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000-6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit,Miswiring, etc complete with BIS certification with 5 years warranty. The contractor has to furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Surya / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA / Capart / Fortune Arrt / FIEM / Panasonic / Arraystorm / GM / Goldmedal / Silicon / Leksa / Orient / HPL LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs.

WideningRoad;Supply and transportation of LED Driver with input line voltage 120V-270V AC, 50Hz with surge protection of 4.0 KV,IP20, suitable for90-180W LED street light fitting.Makes : PHILIPS / OSRAM / GE /CROMPTON / BAJAJ / Keselec / VIN / HALONIX / HAVELLS / HPL / SURYA /SYSKA / Jaquar / Arraystorm / GM /Goldmedal

WideningRoad;Providing independent earthing by exacavating a pit to a depth of 2.25Mtr in all soils as per size specified in the data for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 19mm dia 'B' Class G.I Pipe of 2.5Mtr lengthwith funnel as per National Electric Code and earth connection from electrode GI strip of 40mm x 5mm x 200mm length to be bolted with nut bolts to G.I.pipe including 25mm x 3mm copper strip of 6Mtrs length connected from plate to GI strip including filling with 20Kg Salt and 40Kg Charcoal or 40Kg bentonite powder from the bottom of the pipe and providing CC / Brick massonry chamber 450mmX450mmX400mm and covered with R.C.C. Slab including all accessories and labour charges etc complete as per IS specification 732/1982 (Part II). NOTE: In location where the full length of electrode is not possible due to meeting a water table /rock. The electrode may be reduced length and two earths may be done to meet earth resistance

WideningRoad;Cutting of CC road surface including stacking of excavated materials including cost of men andmaterials etc complete