Municipality Tender

UGD;Carting of surplus excavated rock / earth from the site to a distance of 5.00 Kms suitable including loading, unloading charges, cost & conveyance, dumping, labour charges, all leads & lifts and other incidental and operational charges etc., complete.

UGD;Total Additonal man hole depth 0.1M Depth

UGD;Construction of sewer Circular conical manhole as per type design using flyash Bricks of size 225 x 10 x 6 cms having minimum strength 75 Kgs per Sqm as per IS: 12894-1990 - CLASS - 7.5 in CM (1:3) prop: including CC (1:4:8) bed for foundation and of M15 (1:2.5:5) prop. using 20mm HG metal for benching and channels, inside pastering with 20mm thick using Sulphete resisting cement in CM (1:3) prop: the foundation concrete in Cc (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block/ masonary wherever necessary including finishing the gap with CM (1:3) prop. on both the sides including excvating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (HD-20) and PVC encapsulated steps including cost & conveyance of all material, labour and all otehr incidental and operational charges etc., complete. 1.20dia x 1.65 m depth

UGD;Total Additonal man hole depth 0.1M Depth

UGD;Construction of sewer Circular conical manhole as per type design using flyash Bricks of size 225 x 10 x 6 cms having minimum strength 75 Kgs per Sqm as per IS: 12894-1990 - CLASS - 7.5 in CM (1:3) prop: including CC (1:4:8) bed for foundation and of M15 (1:2.5:5) prop. using 20mm HG metal for benching and channels, inside pastering with 20mm thick using Sulphete resisting cement in CM (1:3) prop: the foundation concrete in Cc (1:4:8) prop. using 40mm nominal size hard broken granite stone and supporting incoming pipes with concrete block/ masonary wherever necessary including finishing the gap with CM (1:3) prop. on both the sides including excvating pits upto required depth in all types of soils and supply and fixing of 560mm dia manhole frame and cover (HD-20) and PVC encapsulated steps including cost & conveyance of all material, labour and all otehr incidental and operational charges etc., complete. 0.90dia x 0.90 m depth

UGD;Manufacture, Supply and Delivery of Rubber rings to suit R.C.C. Spun / Vibrated Cast(Reinforced) Socket and Spigot pipes conforming to B.I.S 5382/ 1985 (rate per each rubberring) including transportation but excluding taxes. the Rubber Rings shall be tested at the factory premises conforming to B.I.S. 5382/1985.

UGD;PHE-LRCS-6: Lowering the RCC S/S pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985

UGD;MANUFACTURE, SUPPLY AND DELIVERY OF 450 DIA R.C.C. SOCKET AND SPIGOT NP-3 PIPES CONFORMING TO B.I.S. 458/2003 EX-FACTORY (RATE PER METER OF EFFECTIVE LENGTH) INCLUDING TRANSPORTATION,TAXES & DUTIES.(PRESSURE)

UGD;RBR-EECD-9(ii): Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH 10% Rock qty on earthwork

UGD;Earthwork in excavation for pipeline trenches as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing

UGD;Cutting road surface including stacking of excavated materials for pipe linetrench work for Cutting Cc Road Surface (PH Items S.No-25 b) SOR no 19-20 Page No: 423/527