Municipality Tender

Development of Grave yard;Supply and placing of M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)BLD-CSTN-2-14 For Gate pillers footings columns 0.3*0.45 m (1.8-0.15-0.4+0.45+1.6)

Development of Grave yard;Supply and placing of M20 grade Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402)BLD-CSTN-2-14 For Gate pillers footings plinth beam 0.3mx0.3m

Development of Grave yard;Supplying, fitting and placing Fe-500 bar reinforcement complete as per drawings and technical specifications for Bars below 36 mm dia including over laps and wastage, where they are not welded. HYSD-Fe500,TMT bars(Thermo mechanically Treated ) including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including all materials etc., complete for finished item of work in all floors.( APSS No.126)

Development of Grave yard;Construction of in RR Masonary using granite stone in Cement Mortor 1:8 Prop using hard granite stone including cost & Conveyance of all materials like Cement, Sand , Water, Granite Stones, Etc., including including Labour for cutting Stones to required size and shape mixing of Cement Mortor Construction, Scaffolding Charges curing Etc., Complete for Finished item of Work . (As per SS 611).P

Development of Grave yard;Brick masonry in C.M (1:6) prop. using 2nd class modular size bricks of locally available size of 23x11x7cm including cost and conveyance of materials to site, mixing of cement mortar to specified thickness, watering, curing, including all scaffolding, hire and operational charges of machinary, all labour charges and all water lead charges etc complete for finished item of work. (230mm thick walls)

Development of Grave yard;BLD-CSTN-8-6-(81) : Plastering with 15mm thick in single coat in CM (1:4) finished smooth including cost and conveyance of all materials to site, seigniorage charges on all materials, finishing, curing, scaffolding and all operational, incidental, labour charges etc., including cutting grooves where ever necessary etc., complete for finished item of work. (As per SS 903). per 10 Sqm.

Development of Grave yard;BLD-CSTN-12-4-(171): Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours) to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 912.

Development of Grave yard;Supplying and fixing of MS Gate using 45 x 45 x 6mm MS equal angle alround and 2 Nos 35x35x5mm Equal angles horizontal supports at 0.50m c/c, 2.0mm MS sheet at bottom 0.30m height and 12mm MS square bars Vertically at 125mm centre to centre including fixing with 4 Nos of MS Z holdfasts (2 on each side) duly making cutting brick masonry, fixing and making to original surface neatly and painting gate with one coat of red oxide primer including cost and conveyance of all materials,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work.

Development of Grave yard;Drilling of 163mm dia bore well By DTH in all formations including all charges conducting yeild test etc., upto 61.0 mts.

Development of Grave yard;Drilling of 163mm dia bore well in all formations including all charges conducting yeild test etc., above 61.0 mt

Development of Grave yard;Manufacture, Supply and Delivery of 250mm diaUnplasticised PVCs Pipes for potablewater supplies conforming to IS :4985/2000 (3rd revision) with bell ends(Socket) as per specification in lightGrey/Natural Ivory Grey/ Any otherColor (except White) inclusive oftransportation to the sub-divisional stores anywhere in TG excluding Taxes.6.0 Kgs/cm2 562/617 SSR 2023-24

Development of Grave yard;Manufacture, Supply and Delivery of 180mm diaUnplasticised PVCs Pipes for potablewater supplies conforming to IS :4985/2000 (3rd revision) with bell ends(Socket) as per specification in lightGrey/Natural Ivory Grey/ Any otherColor (except White) inclusive oftransportation to the sub-divisional stores anywhere in TG excluding Taxes.6.0 Kgs/cm2

Development of Grave yard;Supply and Transportation of 2.00HP 25 Stage single phase ISI submersible motorpumpset suitable for 4" Bore well.Makes: Texmo / CRI / KSB / Aryan Varsha /Lubi elec 5.1.1?

Development of Grave yard;Supply and Transportation of control panelfor single phasesubmersible motors up to 3HP @ 220V 50Hz operating range between80 to 240V including supply and fixing ofDirect - on - Line LTLK / SIEMENS /CROMPTON make Volt meter and Ammeterwith starting and running capacitorsassembled with ISI mark contactors andfitted with Legrand make ISI mark MCB etc., complete.elec 5.10.1

Development of Grave yard;Manufacture, supply, & delivery of High Density Polyethylene pipes (PE-100 Grade) for water supply conforming to IS 4984-2016 including transportation to any where in T.G, but excluding GST and specials etc., complete. (Supply upto 90 mm dia in coil & above 90 mm dia stright length in6 M.) 50 mm 6kG/CM2

Development of Grave yard;Supply of 3 Core 2.5 Sqmm Flat Copper cable of ISI for Submersible Motors.Makes : Polycab / GM / Million / V-Guard / Gold Medal / Kundancab / HPL / RPG / Nandicab / Payal / Finecab / Gemini / Vimal / Suncab / Delton / Ollvin / Airson / Stanjo/ Nakoda / Beljin / Savera Champion / Rhino / Pawancab elec 1.6.3(b)

Development of Grave yard;Geologist charges for selection of scheme sources

Development of Grave yard;Supply, Transportation and fixing of 50mm dia, 450mm length,12mm thicknessand 75mm wide MS Clamp set with required nuts andbolts. 5.13.6 SSR 392/6/7

Development of Grave yard;S& F 32 mm Nominal Bore GI pipe MediumGrade properties & weight as per IS 1239 ISImark with GI fittings including the cost ofpipe & its fittings &labour chargescompleteTBSP GI -10

Development of Grave yard;S& F GI connector 25 mm nominal size diaTBSP G-11-07

Development of Grave yard;S/D of 150mm dia stainless steel bore cover etc