Municipality Tender

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;Supply, Lowering and Laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion & spun yarn including cost and conveyance of pipe. (Reference to specifications BIS No. 6530/7 SWG 250MM Dia

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;BLD-CSTN-2-2(10) : Earth work excavation in Ordinary soils by Mechcanical Means-Upto 3 m depth for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308).

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in A.P., F.O.R. destination including, loading, un-loading & stacking at site but excluding central excise duty, sales tax, octroi and other Govt levies etc., as applicable H.D.-20 with 560mm diaclear opening

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;Repairs to existing manhole of 0.9m dia upto 0.45mt depth with 2nd class traditional Bricks in Cm(1:4) including internal plastering 20 mm thick in CM(1:3) and External Plastering 12 mm thick in CM(1:3) and top benching in CC(1:2:4) including cost and conveyance of all materials and labour, Seigonarage charges, Curing and all taxes etc. complete.

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;Repairs to existing manhole of 0.9m dia upto 0.30mt depth with 2nd class traditional Bricks in Cm(1:4) including internal plastering 20 mm thick in CM(1:3) and External Plastering 12 mm thick in CM(1:3) and top benching in CC(1:2:4) including cost and conveyance of all materials and labour, Seigonarage charges, Curing and all taxes etc. complete.

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;RBR-CCPV-5: Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 53 grade cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 21- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD. RMC M30 GRADE

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;RBR- SBBS-11B Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Instant Repairs to Manhole Chambers/Catch pits, Drainage Pipelines and CC Roads;RBR-EECD-8(c) : Earthwork excavation for road way in soil by mechanical means including cutting and pushing the earth to side of embankment upto a lead of 100 metres including trimming bottom and side slopes in accordance with requirements of lines, grades and cross sections etc., complete for finished item of work for trench cutting as per MOR&H specification No.301 and as directed by the Engineer-in-Charge- (Hydraulic Excavator)