Municipality Tender

NIT 33/11;Earthwork in excavation (Manual means) for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH Ordinary soil

NIT 33/11;for bed

NIT 33/11;Construction of CC Drain from H.no. 6-1-7/10/A to 6-1-7/10/A/3, H.no. 6-1-11/4 to 6-1-16/1, H.no. 6-2-46/C/9 to 6-2-71/12, Form road polas back side 6-3-17/2 to 6-3-17/5/A, and CC Road H. no 6-3-17/2 to 6-3-17/5/A and 6-3-17 in Division no 41 in Khammam Municipal Corporation.

NIT 33/11;CC Cutting

NIT 33/11;Bricks

NIT 33/11;For Mechinary 70%

NIT 33/11;for vent

NIT 33/11;RCC grade M 30 design mix using 20mm graded metal (MORTH) including C&C of all materials, machine mixing, centering, laying, vibrating, curing, labour charges etc. complete. (For buildings & supersturcture upto 5 Mt height.)

NIT 33/11;Construction of un-reinforced, plain cement concrete pavement with M30 grade mix, thickness as per design, over a prepared sub base, with 53 grade opc cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity, laid in approved fixed side formwork (steel channel, laying , steel plates including levelling the formwork ), spreading the concrete with shovels, rakes, compacted using plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per Technical Specification Clause 1501 MORD.

NIT 33/11;Dismantling, clearing away and carefully stacking useful materials for re-use and disposal of unserviceable materials with 100m lead as directed by Executive Engineer duly taking actual premeasurements before dismantling including all labour charges , overheads & contractor profit etc., complete. BLD-CSTN-12-1 for existing culverts

NIT 33/11;PCC M15 Design mix MORTH 12.84 table using 20mm gauge machine crushed HG metal from approved quarry including cost and conveyance of all materials like OPC 53 Grade Cement of Make:ACC/Ultratech/ CCI/ Lafarge/Penna Premium etc., fine aggregate i.e., Godavari Sand (Bhadrachalam Quarry), coarse aggregate, potable drinking water etc. to site, sales & other taxes on all materials, machine mixing charges, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit etc., for finished item of work for Drain & Culvert Bed and Side Walls

NIT 33/11;For walls

NIT 33/11;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) ( Fe 500 grade as per IS 1786-1979) of Make : Vizag Steel/TATA/SAIL/ Jindal etc., of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials and overheads & contractors profit etc., complete for finished item of work in all floors.( APSS No.126)

NIT 33/11;for Culverts

NIT 33/11;Carting of excavated surplus earth including cost and conveyance and labour charges etc., complete