Municipality Tender

Maintanence and Repairs to UGD;Repairs tof existing manhole of 0.9m dia upto 0.90mt depth with 2nd class traditional Bricks in Cm(1:4) including internal plastering 20 mm thick in CM(1:5) and External Plastering 12 mm thick in CM(1:4) and top benching in CC(1:2.5:5) including cost and conveyance of all materials and labour, Seigonarage charges, Curing and all taxes etc. complete.

Maintanence and Repairs to UGD;Manufacture as per BIS:12592 (Part 1&2) Supply & Delivery of manhole covers and frames with ISI marking anywhere in T.G., F.O.R. destination including, loading, unloading & stacking at site but excluding all taxes, as applicable. Page 468 of 483

Maintanence and Repairs to UGD;Earth work excavation for foundations and depositing on bank for all lifts and with an initial lead of 10m including all operational, incidental, labour charges such as shoring ,sheeting, planking, strutting, etc. complete for finished item of work including seigniorage excluding dewatering charges etc as per SS - 20 B (APSS 308) - Ordinary Soil - Manual Means.

Maintanence and Repairs to UGD;Excavation for roadway in hard rock (blasting prohibited) with rock breakers including breaking rock, loading in tippers and disposal with initial lift of 3 mts and lead upto 1000 metres, trimming bottom and side slopes in accordance with requirements of lines, grades and cross- sections as per Technical Specification Clause 302.3.5 MORD / 301 MORTH by Mechanical Means (with all lifts)

Maintanence and Repairs to UGD;RBR-STCL-15 ; Dismantling of Existing cement concrete pavement by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials seperately including all hire & operational charges of T&P, labour charges, all taxes, complete for finished item of work as directed by Engineer-in-charge as per Technical Specification Clause 202 MORD/MORTH.

Maintanence and Repairs to UGD;TBSP-B.III-01 Making drainage connection from a drainage line in to an existing inspection chamber/ manhole including making a hole in to the chambers, placing necessary pipes in the connection and making good the junction in and out of the chambers including cost of necessary cement, sand and aggregate etc.,

Maintanence and Repairs to UGD;PHE-LJSW-13: Supply, Lowering and laying in ready made trench true to alignment and gradient, jointing, and testing of stone ware pipes including cost of jointing material such as cement mortar (1:1) proportion and Spun yarn including cost and conveyance of pipe. (Reference to specifications BIS No. 6530/72)

Maintanence and Repairs to UGD;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex?factory (rate per meter of effective length) including transportation & taxes (FOR R.C.C. S/S PIPES NP3 SSR 2022-23, )

Maintanence and Repairs to UGD;Lowering the RCC S/S NP 3 pipes carefully into the trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water with a water lead upto 500 meters including cost of rubber rings as per BIS No. 783/1985 (PHE-LRCS-6)

Maintanence and Repairs to UGD;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar 1:3 prop; ½? thick both inside and outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification. Each RS. 7,475.00/- TBSP-B.I-01 SSR 22-23

Maintanence and Repairs to UGD;Extra 0.1m additional depth for 0.9 mtr dia chamber

Maintanence and Repairs to UGD;Extra 0.1m additional depth for 1.2 mtr dia chamber