Municipality Tender

Community Hall;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges, including contractor profit etc etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings and as per 2.1.1 of Sta revised data of BLD -ELEC-2-1

Community Hall;Supply and Fixing of 25mm dia 2mm thick PVC pipe (ISI MARK) concealed in wall with all required accessories including masonary work and labour charges etc., complete.

Community Hall;Supply and Fixing of 25mm dia 2mm thick PVC pipe (ISI MARK) concealed in Roof Slabs with all required accessories including masonary work and labour charges etc., complete.

Community Hall;Providing high yield strength deformed (HYSD) steel bars (Fe 415 grade as per IS 1786-1985) of 8mm to 40mm diameters, cutting, bending, to required sizes and shapes placing in position with cover blocks of approved size and binding wire of 20SWG, forming grills for reinforcement work as per approved designs and drawings including cost and conveyance of bars from approved sources to site of work, including cost and conveyance of binding wire, cover blocks and all operational, incidental, and labour charges such as cutting, bending, placing in position, tying including contractor profit etc., and Countryes & other taxes,on cost of all materials complete for finished item of work (APSS No.126) in all floors. and as per revised data BLD-CSTN-4-1

Community Hall;Supplying and fixing of Unplasticised PolyVinylChloride (UPVC) 3 track sliding windows withmesh shutter ? (2-glass shutters and 1- meshshutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and notmore than 12PHR of CaCo3 forevery100parts ofPVC resin) of(94mmx45mm)/(80mmx52 mm) x2.20 mm for outer frames, (58 mm x 39 mm)/(54mm x 38 mm) x 2.20 mm for sliding shutterframes capable of mounting single glazing systemstructurally reinforced withhot dip galvanized upto 50 microns of minimum thickness of 1.0 /1.2 mm prefabricated & welded through fusion welding. The window sashshall befitted with 5 mm thick clear float glass ofreputed make and mesh shutter frame shall be(42mmx25mm)/(52mmx21.5mm) x2.0mm fittedwith Vinyl Coated Fibremesh-on rollers / pulleyduly fixed with Grey colour TPV Gasket for sash &Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item ofwork.

Community Hall;Painting to New wood work with two coats of ready mixed synthetic enamel paint first quality all shades to give an even shade over base coat Primar with Luppam finishing after thouroughky brushing the surface to remove all remains including cost and conveyance of all materials to site, Countryes & other taxes, all operational, incidental and labour charges,including contractor profit etc., complete for finished item of work.(3 coats) (APSS No. 1201 & 1212). and as per revised data BLD-CSTN-12-5 For Door D 1.20 x2.0m

Community Hall;Supply & application of one coat water base cement primer of exterior grade II and two coats of acrylic emulsion paint having VOC ( Volatile Organic Compound) Content less than 50 grama/litre for exterior walls including cost and conveyance of all materials to site sales & other taxes , incidental operational and all labour charges etc., and overheads & contractors profit complete for finshed item of work in all floors

Community Hall;Supply & application of one coat water base cement primer of interior grade I and two coats of acrylic emulsion paint having VOC ( Volatile Organic Compound) Content less than 50 grama/litre for internal walls including cost and conveyance of all materials to site sales & other taxes , incidental operational and all labour charges etc., and overheads & contractors profit complete for finshed item of work in all floors

Community Hall;Providing skirting to internal walls to 15 cm height/risers of steps with Vitrified tiles of Nano polished /stain length equal to flooring stones, set over base coat of CM (1:3) 12 mm thick with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointed with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., complete including c., complete for finished item of work, but excluding the cost of conveyance of all materials Deduction Door

Community Hall;Flooring with vitrified tiles of Supply of Nano polished /stain free soluble salt/ stain free porcelain vitrified tilesscreen printed of size 600 x 600 mm and hickness between 8-10 mm 1st quality conforming to IS:15622 - 2017, IS:13630 (Parts 1 to 15) of any colour and finish in all shades and designs etc., complete, including seigniorage charges, etc., complete for finished item of work, but excluding the cost of conveyance of all materials.

Community Hall;Plastering 20mm thick in two coats with base coat of 16 mm thick in CM (1:5)prop and top coat of 4 mm thick in CM (1:3)prop dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, Countryes & other taxes on all materials, all operational, incidental and labor charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing,including contractor profit etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904) For External walls of AP Revised data Long wall Short wall Deduction Doors D Doors D Ventilator

Community Hall;Plastering 12mm thick in two coats with base coat of 8 mm thick in CM (1:5)prop and top coat of 4 mm thick in CM (1:3)prop dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, seigniorage charges, Countryes & other taxes on all materials, all operational, incidental and labor charges such as mixing mortar, scaffolding charges, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, finishing, curing,including contractor profit etc., complete for Even Surfaces of Wall for finished item of work. (APSS 901,903 & 904) For Internal walls of AP Revised data BLD -CSTN- 8-9 Long wall Short wall Deduction Doors D Doors D Ventilator

Community Hall;Ornamental plastering to ceiling 12mm thick in CM (1:3) with dubara sponge finish including cost and conveyance of all materials like cement, sand, water etc., to site, including seigniorage charges, sales & other taxes on all materials, all operational, incidental and labour charges such as mixing mortar, finishing, scaffolding, lift charges, including cutting of Grooves wherever necessary as directed by Engineer - in - charge, curing, etcincluding contractor profit ., complete for finished item of work.(APSS 901& 903 ) of AP Revised data BLD -CSTN- 6-1 Hall Hall Hall

Community Hall;Providing impervious coat to exposed RCC roof slab surface with CM(1:3), 20mm thick with 1kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, seigniorage charges, excluding conveyance charges of materials and including all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing, rounding off junctions of wall and slab etc,, complete for finished item of work

Community Hall;Supplying and filling gravel in trenches ,sides of the foundations and basement with initial lead in layers not exceeding 15 cm thick consolidatiing each depposited layer by watering and rampping including cost and conveyance of water to work site and all operational incidental ,labour charges hire charges and T & O Complete for finished item APSS 309 &310)

Community Hall;Supply and fixing of Sal wood Door double shutter fully panelled door of size 1.20 x 2.1mt with frame made of well seasoned Sal Wood scantlings of size 100 x 75mm and shutter made ofmedium teak wood side rails 100mm X 32mm, top rail 100 mmX32 mm, bottom rail 100mmX 32 mm and intermediate rails of 100mm x 32 mm and planks s - 5 no's of 25mm thick as per approved design with fixtures of 6 nos of 9" ' z" holdfasts, 300 mm long MS Iron coted aldrop-1 no, 125mm long MS iron butt hinges 6 No's, Door stoppers-2 no, 150mm long MS coated Tower bolts 3- no's MS iron coated fancy handles 150 mm -2nos with necessary screws complete including cost and conveyance of all materials and labour charges etc. complete as per specifications (APSS NO.1001 & 1002)

Community Hall;Brick Masonry in superstructure with CM (1:8) prop: using second class bricks from approved source having minimum crushing strength of 40 Kg/Sqcm. including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental and labor charges such as mixing cement mortar, constructing masonry, scaffolding charges, lift charges, curing, including contractor profit etc., complete for finished item of work. (APSS No. 501 & 504) of AP Revised data BLD -CSTN- 5-4 Long wall Short wall Long wall Short wall Septic tank Septic tank DeductionDoors D Doors D Ventilator

Community Hall;Vibrated reinforced cement concrete corresponding M20 grade as per IS 456 equivalent to (1:1.5:3) prop: nominal mix (Cement: fine aggregate: coarse aggregate using 20mm size HBG (SS5) machine crushed metal from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand), coarse aggregate, water etc. to site including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental, and labor charges such as centering, shuttering, scaffolding, lift charges, machine mixing, laying concrete, vibrating, curing concrete including contractor profit etc, complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No.402 & 403) FOR SUNSHADE 0.60 M WIDE. of AP Revised data BLD-CSTN-6-6 Doors

Community Hall;RCC M-20 Nominal mix (Cement:fine aggregate: coarse aggregate) corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site and including sales & other taxes on all materials including all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc..complete but excluding cost of steel and its fabrication charges for finished item of work, but excluding centering, shuttering. FOR LINTLES As per AP Revised data Doors Doors Ventilator

Community Hall;For Roof Slab(1:1.5:3) Prop 100 mm thick For Roof Slab 100 thick on Septic tank

Community Hall;For Roof Slab (1:1.5:3) Prop 125 mm thick For Roof Slab 125 mm

Community Hall;Roof Beams Long beams Cross walis

Community Hall;Plinth beams Long walls Cross walls

Community Hall;For Columns Up to Basement Level

Community Hall;RCC M-20mm size graded machine the aggregate: coarse aggregate) corresponding to Table 9 of 18 456 including cost and conveyance of all materials like cermetal (coarse poate (sand) coarta acidental using 20 and roonde machine crushed hard granite e corggregate) from approved date water etc., to site and including sales & other taxes cement, fine aggregaling all operational chol profit and labour charges such as machine mixing, layingall materials incing including contractor, but etc. complete but excluding cost of steel and its fabricationcrete, cus for finished item of work, but excluding centering, shuttering. of AP Revised data BLD-CSTN-3-13 For Column Footings

Community Hall;B18. Unskilled Labour charges for Filing with useful available excavated earth in trenches, sides of foundations and basement complete for finished item of work. (APSS NO. 309 & 310) (CSSR)

Community Hall;Coursed Rubble stone masonry in CM (1:6) prop: (Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing, including contractor profit etc., complete for finished item of work for foundation and basement (APSS No. 601 & 615) in GROUND FLOOR of AP Revised data BIDCSTN-6-6 Above Ground level Long walls out side Cross walls Deduction Columns

Community Hall;RR Masonry in CM (1:6) Cement: Sand) using hard granite stones from approved quarry including cost and conveyance of all materials like Granite stones, cement, sand, water, etc., to site including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental, and labor charges such as cutting stones to required size and shape, mixing of cement mortar, constructing masonry, curing etc., complete for finished item of work for foundation and basement (APSS No. 601 &615) Below Ground level Long walls Cross wall Deduction for Columns

Community Hall;Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. All work upto plinth level. nominal mix (cement: fine aggregate: Coarse aggregate) using 40mm size HBG (SS5) metal from approved quarry including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc. to site, including seigniorage charges, Countryes & other taxes on all materials, all operational, incidental, and labor charges such as mixing, laying and ramming concrete in layers in position not exceeding 15cm, finishing top surface, curing concrete, etc. complete for finished item of work for Foundations and Flooring Bed (APSS No. 402) Column footing Long wall Cross wall Septic tank Flooring bed

Community Hall;Earthwork in excavation for structures as per drawing and technical specifications Clause 306.1 including setting out uppstruction of shoring and bracing and technical stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides removal of and backfilling in trenches with excavated suitable material as per Technical specification 305 MORD/304 MORTH