Municipality Tender

NIT 18/04;Earth work excavation and depositing on bank with an initial lead of10Mts. and lift of 2 Mts. in all soils including Labour charges etc.complete.

NIT 18/04;Construction of un-reinforced, plain cement concrete pavement with M30 grade mix, thickness as per design, over a prepared sub base, with 53 grade opc cement or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity, laid in approved fixed side formwork (steel channel, laying , steel plates including levelling the formwork ), spreading the concrete with shovels, rakes, compacted using plate vibrator and finished in continuous operation including provision of contraction and expansion, construction joints, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per Technical Specification Clause 1501 MORD.

NIT 18/04;Conveyance / carting charges for machinery for 1KM for transporting materials by tippers and trucks earth/sand/gravel

NIT 18/04;Construction of Culvert

NIT 18/04;Earth work excavation in all soils and depositing on bank with an initial lead of 10m and depth up to 3m including all operational,incidental, labour charges such as shoring, sheeting, planking, strutting etc., and overheads & contractors profit complete for finished item of work excluding dewatering charges etc.,

NIT 18/04;Supply and filling of stone dust including cost and conveyance of all materials, watering, and labour charges for filling etc., completed

NIT 18/04;PCC M15 Design mix MORTH 12.84 table using 20mm gauge machine crushed HG metal from approved quarry including cost and conveyance of all materials like OPC 53 Grade Cement of Make:ACC/Ultratech/ CCI/ Lafarge/Penna Premium etc., fine aggregate i.e., Godavari Sand (Bhadrachalam Quarry), coarse aggregate, potable drinking water etc. to site, sales & other taxes on all materials, machine mixing charges, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit etc., for finished item of work for Drain & Culvert Bed and Side Walls

NIT 18/04;for Bed & Vent

NIT 18/04;for walls

NIT 18/04;RCC grade M 30 design mix using 20mm gauge machine crushed HG metal from approved quarry including cost and conveyance of all materials like OPC 53 Grade cement of Make L ACC/(MORTH) including C&C of all materials, machine mixing, centering, laying, vibrating, curing, labour charges etc. complete. (For buildings & supersturcture upto 5 Mt height.)

NIT 18/04;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) ( Fe 500 grade as per IS 1786-1979) of Make : Vizag Steel/TATA/SAIL/ Jindal etc., of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials and overheads & contractors profit etc., complete for finished item of work in all floors.( APSS No.126)

NIT 18/04;for chamber

NIT 18/04;Carting of Excavated surplus earth upto a lead to 2 to 3 km including cost and conveyance and labour charges etc., completed