Municipality Tender

CH29;BLD - CSTN - 6 -18 Masonry work in CM(1:8) prop with Flyash Cement solid blocks of size290x225x140mm for manufacturing of flyash solid blocks using flyash of 80kgs, cement of 15kgs. Gypsum of 5kgs .and stone dust including cost and conveyance of all materials ,labour charges ,seinorage charges ,scaffolding and curing etc.,complete with acompresive streangth not less than 50k/sqm for walls for Superstructure Walls

CH29;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Column Footings

CH29;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Plinth Beam

CH29;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Columns

CH29;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Brace Beams

CH29;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Lintel Beams

CH29;BLD-CSTN-2-14 Supply and palcing of the M - 25 Design Mix concrete corresponding to IS 456 using WEIGH BATECHER / MIXER with 20 MM size graded machine crushed hard granite metal (coarse aggregate ) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (Sand) coarse aggregate, water etc., to site and including Seigniorage charges, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing , laying concrete, curing etc., complete but excluding scost of steel and its fabricaton charges for finished item of work (APSS No. 402) with minimum cement content as per IS code - Sun Shades

CH29;Collection and filling with gravel (excluding rock) in trenches, sides of foundations and basement with initial lead in layers not exceeding 15cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T&P etc. complete for finished item of work (APSS No.309 & 310)

CH29;BLD-CSTN-3-1 (4)Brick Masonary 2nd class ground moulded or treditional size 23x11x7 Cm in cement mortor 1:6 Prop including cost & conveyance of all materials like cement , sand, bricks, water etc., to site cost of seigniorage charges on all materials, including all albour chargess like mixing cement mortor, scaffoding chargess lift chargess, curing chargess etc., complete for finished item of work.

CH29;BLD-CSTN-6-10 Plastering with cm 2 Coats, 12 mm thick, base coat in Cm (1:5) 8mm thick and top coat in Cm(1:5), 4mm thick with dubra Sponze finishing including cost and convience of all men and material labour charges etc., complete finished item of work - Outside

CH29;BLD-CSTN-2-19 Supplying,fitting and placingTMT bar reinforcement in foundation complete as per drawings and technical specifications for Bars below 36mm dia including over laps and wastage, where they are not welded.

CH29;supply and delivery of structural steel members for heavy steel works like trusses stanchion heavy beam & girders including transportation etc complete

CH29;supply and delivery of ms plates including transportation etc complete??

CH29;TBSC-D.VI-05 Supply of pre-painted Galvalume Trapezoidal profile Roofing sheets with 0.50 mm thickness, coating: Alu-Zinc coating AZ150 gsm. Tensile Strength: 550 MPA. Paint Coating: Regular Modified Polyester painting. Painting thickness (Top) : 18 to 20 Microns, (Bottom) : 5 to 7 Microns. Sheet width : 1.020 Length : Maximum 12meters with Regular Range Colours

CH29;Labour charges for fixing of powder coated tata / Zindal company iron sheets

CH29;Supply and fiixng of 25mm dia long screws for fitting of galvonized sheets including cost and conveyance of material

CH29;Supply and fixing of nuts & bolts including cost and conveyance of all men and materials and labour charges etc. for Rafter fixing

CH29;TBSC-D.VI-09 Supply of Roof Accessories medium size: Ridge, Barge Cap, Corner Trim, L-Flashing, Down Pipes, Gutter etc., with 0.50mm thick, Width: 0.585, Length: Maximum 2½ Meters

CH29;BLD-CSTN-10-2 Painting,Priming Coat on NewPlasteredSurface including cost and conveyance of all men and materials etc complete

CH29;BLD-CSTN-12-12-(197) Painting in two coats with synthetic best enamal paint of approved quality, colour and shade over a primary coat of white lead to new wood/steel works after the surfaces is throughtly cleaned and scraped, including scaffolding cost of materials and labour charegs etc. complete for finished item of works.

CH29;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding windows with mesh shutter ?(2-glass shutters and 1-mesh shutter) duly manufactured using UPVC reinforced profiles (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin)of (94 mm x 45 mm)/(80mm x 52 mm) x 2.20 mm for outer frames, (58 mm x 39 mm)/(54 mm x 38 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make and mesh shutter frame shall be (42 mm x 25 mm)/(52 mm x 21.5 mm) x 2.0 mm fitted with Vinyl Coated Fibre mesh- on rollers/ pulley duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation,erection at site complete for finished item of work.

CH29;TBSC-E.I-01 Supply & fixing of Rolling shutter made of 80x 1.25 mm machine rolled CRCA laths,interlocked together through their entire length and jointed together at the ends by end-locks, mounted on specially designed pipe shaft of 50mm Diameter nominal bore MS B class pipe with brackets, plates, guide channels, stoppers, bottom locking plates and arrangements for inside & outside locking with push-pull operations including cost of hood cover and springs complete, painted with one coat of approved steel primer, locks, ball bearings, all accessories etc complete for finished item of work as perspecial Spec: 1108

CH29;Providing and fixing factory made solid Wood Polymer Composite (WPC) single extruded Door Frame section of 100*65 MM with encapsulation of 6 MM rigid layer on all external surfaces. The door frame will have a rebate of 32MM/ 37 MM. The two Vertical members are to be joined together with the horizontal member using 8x75 MM long MS Star full thread screws to be used with reverse forward speed control hand drilling machine.The ready/assembled door frame is fixed to wall using Z Hand fast 300 MM long hold fast

CH29;Supplying and fixing of 28/30 mm thick Wood Plastic Composite (WPC) Door shutter, comprising of 70% virgin polymer, 15% wood powder (fiber), and the remaining 15% additives, comprising of virgin PVC polymer of K value 58-60 (Suspension grade), Calcium carbonate and natural fibers (wood powder) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum door density of 650 kg/cum, screw withdrawal strength 1800N (Face) & 900N (Edge), Modulus of Elasticity 900N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws all as per direction of Engineer - in- Charge (SS butt hinges and SS screws shall be paid separately)

CH29;Supply and fixing of ISI mark 25mm dia 2.2mm thick PVC conduit pipe Sudhakar / GM/AKG/VIP / Modi make concealed in wall with all required acessories including No.14 SWG GI wire for earth continuity including chiseling the wall wherever necessary , including necessary masonery work for light/fan pointand seperate plug point with teak wood deep box including cost and conveyance of all materials to site and labour charges, sales tax etc., complete for finished item of work.

CH29;Supplying and wiring with 2 runs of 14/0.3m (1.00 Sq.mm) FRLS / HFFR P.V.C. insulated ISI Copper Cable GM/L&T/RPG/Havells/V-Guard/Power Flex/Polycab/Gold Medal/ Standard /Milion/ Vimal/ Suncab/ Paragaon/FortuneArt make in the existing metallic / non-metallic conduct pipe with 6A 1 Way flush type switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work for light, bell, fan and exhaust fan points in Non-Residential Buildings

CH29;Supply and fixing of 6A 3/2 pin flush type socket with 6A switch control of Anchor / Gold medal olive / Million zoom make with ISI mark on a common switch board with earth continuity including wire leads, earth connections including cost and conveyance of all materials to site, labour charges and sales tax etc. complete for finished item of work

CH29;Supply and fixing of batten holder / slanting holder Anchor / Gold medal olive / Million zoom make with ISI mark in lieu of ceiling rose of light point with 40W bulb all connections including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

CH29;Supply and run of 2 of 36/0.3mm (2.5 sqmm) FRLS / HFFR PVC insulated ISI Copper cable of makes Polycab / Havells / Gold medal /Fortune art /L&T/ HPL in existing metallic / non-metallic conduit pipe for mains including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

CH29;Supply and fixing 4 way SPN Distribution board with IP-20 protection of make Standard / Havells / HPL/Toyoma/ C &S suitable for single phase 40A Double pole Isolator as incomer and 10KA-6-32A range single pole miniature circuit breakers four numbers (4Nos) as out going with internal connections including cost and conveyance of all materials to site, labour charges for surface / flush mounting etc., sales tax complete for finished item of work.

CH29;Providing independent earthing for main switches integrated circuit cutouts and moters with 40mm dia Medium grade GI Pipe of TATA/Zenith/GST make of 2.5 m length duly providing 12mm dia 16 Nos. holes and rewired bolts, nuts and washers, checknuts, Humepipe ring 18 inches dia, 2 inch thick etc., as per IS specifications with necessary double GI earth wire NO. 8 SWG inclkuding filling with equal preparation of salt and charcoal in layers including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

CH29;Supply and Run of 2 of 6 Sq.mm (7/18) WPSC ISI Aluminium wire of makes Finolex / Polycab/ Gold Medal /million /Payal/ Power Flex along with No.10 SWG G.I bearer wire through PVC cleats with all accessories including cost and conveyance of all materials to site, labour charges and sales tax etc., complete for finished item of work.

CH29;Supply and transportation of 30W. LED Street light Body made of high grade pressure die ? cast Aluminium alloy with corrosion resistant powder coat, having protective toughened glass cover, Less Glare, IP 66 (Silicon gasket ensures Optical & Electrical compartments are IP 66) protected, wide operating voltage range, P.F > 0.90, System having efficacy >100 lumens/watt, with Ingress protection IP66, Potted driver, Driver surge protection >10KV, THD<15%, CCT: 3000- 6500K as desired by the department and as per IS, CRI>70, Inbuilt Electrical protections like Over voltage, short circuit, Over load, Open Circuit, Miswiring, etc complete with BIS certification with 5 years warranty. The contractor must furnish the manufacturer warranty letter, LM 79 and LM 80 certificates. LUMINAIRE MAKE : PHILIPS / OSRAM / GE Venture / CROMPTON / BAJAJ / Wipro / Jaquar / Eveready / Halonix / Keselec / HAVELLS / POLYCAB / SURYA / SYSKA / Capart / Fortune Arrt / FIEM / Panasonic / Arraystorm / GM / Goldmedal

CH29;Supply and transportation of 20W, 2000 lumens, T8,1200mm length LED tube light, input voltage AC 220 - 260Volts with PF=0.9, Surge protection: 2KV,THD<125%, with inbuilt driver and frosted cover CCT: 3000K - 5700K, minimum CRI=80,.etc., complete Manufacture has to submit LM79,LM80 & Photobiological Safety Report. Luminaire Performance Complies to IS10322 (Part 5/Sec 3) & IEC 60598-1,IEC 60529 ISO certified company. LUMINAIRE MAKE: Phillips / OSRAM / GE / Crompton / VIN / Bajaj / Havells / Halonix / HPL. LED MAKE : PHILIPS LUMILEDS / CREE / NICHIA / OSRAM / SAMSUNG / LG LEDs

CH29;Supply and errecting of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient

CH29;Flooring with vitrified tiles of 1stquality ,set over base coat of cement mortar (1:8),12mm thick over CC bed already laid or RCC roofslab, including neat cement slurry honey like consistency spread @3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade,including cost of all materials like cement,sand water and tiles etc.,complete,including seigniorage charges,etc.,complete for finished item of work,but excluding the cost of conveyance of all materials

CH29;Providing skirting to internal walls to 15cm height /risers of steps with vitrified tiles length equal to flooring stones,set over base coat of CM(1:5)12mm thick with cement slurry of honey like consistency spread at the rate of 3.30kgs per sqm and jointed with white cement paste mixed with pigment of maching shade to full depth,including cost of all materials like tiles,cement,sand and water etc.,complete including seigniorage charges,etc.,complete for finished item of work,but excluding the costof conveyance of all materials