Municipality Tender

median;Supply and fixing of Automatic Street Light Control System based on daywise users settable mode of astronomical timer or digital timer with Optical Micro Sensor, Low voltage / High voltage trip and reset, operating voltage 380-480V AC, 50 HZ and shall withstand surge level of 8 KV The electronic controller with IP 65 protection and suitable SMC/PC enclousure with IP 54 protection, MCBs of Legrand / Schneider / LK/Siemens /BCH of10kA C curve and Contactor suitable to control the load 3 KW Three phase load with necessary hardware, Allen key set and clamping arrangements Makes Nature switch / Light Mate / Havells

median;Supply and fixing of 40 mm dia nominal bore Medium Class (B) GI Pipe 40mm Nominal Bore medium grade G.I. Pipe

median;Supply and fixing of heavy duty type single compression brass cable glands duly nickel plated complete with brass checknut, outersheath sealing rubber ring and washers suitable for Up to 16.0 Sq mm 4 Core XLPE insulatedarmoured cable, including all charges and miscellaneous items etc complete Makes: SMI/Commet/Dowels

median;Supply and fixing of heavy duty long barrel copper lugs confirming to IS specifications suitable for Up to 16 Sq mm cable etc complete with nuts, bolts and washers.Makes: DMI/Jainson / Dowels or equivalent make as approved by the department Copper lugs

median;Supply of 2.5 Sqmm 3 Core PVC/XLPE Insulated, Flexible Armouring Flexible Copper cal as per IS 7098/Part-1/1988 including all transportation charges etc complete Makes Finolex/RR kabel/Havells/Polycab/RPG/KEI/Gloster/V-Guard/Finecat/S Gemini Unistar / Windsor / Payal / Fortune Arrt / Avocab/ Nakoda/HPL / Sudhak Bonton/Rajnigandha/Pawancab/ South King. 3 Core x 2.5 Sqmm FRLS armoured copper cabl

median;Supply and erection of the feeder pillar box of MS sheet of 14 SWG 110 x 700 x 250 mmm size and painted with 2 coats of red oxide and two coats of synthetic enamel paint of light gra shade (or power coated) The FPB should be out door type, dust and vermin proot confirman to IP-55 degree of protection as per IS-2147 The inner door of the box should be having interlocking arrangement Single compression cable glands and crimping type lugs shall c carmed out with copper standard conductor, flexible PVC insulated 1100 V grade wire.The FPB should consists the following 63A, 4 Pole isolator as incomer, 9 Nos 6-32A SP MCBS

median;Supply and Transportation of Outer dia 63mm and Inner dia 51mm double walled corrugated HOPE duct made as per specification BSEN 500 86/15 16205 Part 24 2017 with al accessories like couplers, bends, end caps. Ts etc, complete 51mm dia DWC pipe

median;Supply of 16 Sqrem 4 Core XLPE insulated 1100V grade amoured alamon cathe withd kas per specification confirming to 15 7098 (Part-1) Makes Terrental Pelycab/Havels/Gloster/KEI/Finoles/Payal / RR kabte/Betin/Oven/FPGV Guard Orbit/Fortune Ant Gemacab Bonton/SPM Unatar/Wever! Ava Pawancab/Nakoda/Suncab 16 Sqmm 4 Core

median;Supply of 10 Sqmm 4 Core XLPE insulated, 1100V grade armoured alluminium cable with mark as per specification confirming to IS:7098 (Part -1) Makes Torrent/Unicab/Universal Polycab / Havells / Gloster / KEI / Finolex / Payal / RR kable / Beljin/Olivin/Finecab/RPG/V Guard / Orbit / Fortune Arrt / Gemscab / Bonton / SPM / Unistar / Windsor Avocab Pawancab / Nakoda / Suncab 4 Core 10 Sqmm

median;Foundation and erection charges with special T&P, for 9.00Mtrs/10Mtrs long Octagonal / Conical pole duly erecting on base plate duly providing 4 Nos foundation bolts with nuts with providing of 0.60Mtrx0.60Mtrsx1.40 Mtr size M20 cc work vibrated concreting mixing with necessary steel (15kgs) reinforcement as directed by the field engineers during execution including centering, decentering, water curing as required, soil exacavation, back filling, muffing removal and coil earthing including all labour charges and cost and conveyance materials etc. complete

median;Fabrication, Transportation and supply of 1.5 Mtr sword type or any decorative double arm bracket with dooms complete with all accessories with MS galvanized 50mm dia Pipe. Makes: BAJAJ / VALMONT / TRANSRAIL / SKIPPER / UTKARSH/LAASMA/CONSOUL/ Lysaght pole / BPP / Surya

median;Fabrication, Transportation and supply of hot dip galvanized Octogonal Pole with BSEN 10025 grade S 355 JO steel plate for shaft, IS 2062 for base plate with door opening arrangement, including chain for anti theft mechanism, supply of suitable boards with bakelite sheet, din channel for MCB's as per IS specification suitable to withstand the wind speed of 180 KMPH for 10 Mtrs height Pole having dimensions Bottom 175mm, Top 70mm with 3mm thick, base plate 275 x 275 x16mm and 4 Nos of M24 x 750mm long 'J' bolts along with template or equivalent Makes: BAJAJ / VALMONT/TRANSRAIL / SKIPPER / UTKARSH / LAASMA/CONSOUL Lysaght pole / BPP / Surya

median;Planting of bag plants after refilling the pits/support sticks (same as 2.15.11) (As per FSR 69)

median;Cost and conveyance of well-decomposed Farmyard manure planting site (a) 60 cm cube (0.50 cft/pit

median;Transportation of plants from nursery site to planting site above a lead of 3km including loading and unloading wherever departmental vehicles are not provided (From Kadiyam Nursery to Gadwal 528.3 Kms - As per FSR 67) for filling in side the median

median;Supply of premium make CPVC Pipes of 22.20mm OD Pipe- SDR 13.5

median;Painting, with arts on New Plastered Surface including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911

median;Painting, Priming Coat on New Plastered Surface including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911

median;Radamacheria 21"x21"

median;Cesium 18"x18"

median;Bouganvillea 18"x18"

median;Supply. Delivery of Plants including Transportion from Nursery to Proposed park including all labour charges etc complete and other varieties plants etc complete Mitchi Merry Green 25"x25"

median;Plastering with CM 2 coats, 20 mm thick, base coat in CM (1.6), 16mm thick and top coat in CM (1.4), 4mm thick with Dubara sponze finishing Chennai Shopping Mall to Existing Culvert

median;Carting of surplus earth including loading, unloading and conveyance upto 3kms including all labour charges RBR-FNDN-2. 80% of EWE Qty

median;Groove Cutting of 2-4 mm for 1/3rd depth of concrete slab using concrete groove cutting machine with diamond studded saw within 24 hours of casting of CC pavement

median;Vaccum drying of freshly laid cement concrete floor using 100% air tight suction mat of suitable size and length.vaccum pump to maintain vaccum presssure 0.7-0.8 atmospheres as per the standard procedure floating with power floater, mechanical travelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour,fuel etc. complete for finished item of work as directed by Engineer-in-charge of the work (as per quotation) On Existing Culvert

median;Construction of un-reinforced, dowel jointed at expansion and construction joint only, plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement or any other type as per Clause 150122 M30 (Grade), coarse and fine aggregates conforming to IS 383, maximum in a concrete mixer of not less than 02 cum capacity and appropeiate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 mictron thick polythene film, wedges steel plates including levelling the formwork as per drawing), spreading the concrete with sholvels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, dowel bars, near approaches to bridge/culvert and construction joints, admixtures as approved, curing of concrete slabs for 21-days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD On Existing Culvert

median;Formation of VDCC Road Scarifying the existing bituminous road surface to a depth of 150 mm and disposal of scanfied material with a lift upto 3 m and lead upto 1000 m as per Technical Specification Clause 301.4 MORD On Existing Culvert