Municipality Tender

Community Hall;BLD-CSTN-8-10-(85): Plastering 12mm thick two coats with base coat of 8mm thick in C.M. (1:5) and top coat of 4mm thick in C.M. (1:3) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand, Water, etc., to site, seigniorage charges, all operational, 15 including charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves where ever necessary etc., complete for finished item of work.

Community Hall;BLD-CSTN-8-9-(84): Plastering 20mm thick two coats with base coat of 16mm thick in C.M. (1:6) and top coat of 4mm thick in C.M. (1:3) with dubara sponge finishing including cost & conveyance of all materials like cement, Sand, Water, etc., to site, seigniorage charges, all operational, 14 including charges, labour charges for mixing mortar, finishing, scaffolding, lift charges, curing, including cutting grooves where ever necessary etc., complete for finished item of work of uneven surfaces of walls. (External walls)

Community Hall;BLD-CSTN-5-4-(42): Brick Masonary 2nd Class Ground moulded or treditional size 23x11x7 Cm in Cement Mortor 1:6 Prop including Cost & conveyance of all Materials like Cement, Sand, Bricks, Water, etc., to site cost of, including all labour charges like mixing Cement Mortor, scaffoding charges lift charges, curing charges etc., complete for finished item of work

Community Hall;BLD-CSTN-2-8 (16): Filling with Gravel in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, 4 consolidating each deposited layer by watering and ramuning including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310) Gravel Filling

Community Hall;Roof Beams Horizontal +0.60 Projection-Al-A2,A5-A6,B1-B2,B5-B6,C1-C2,C5-C6,DI-D2,D5-D6,E1-E2,ES-E6 Horizontal-A2-A5,B2-BS,C2-C5, D2-D5,E2-ES Verticle-A1-E1,A2-E2,A5-ES,A6-E6 Verticle-B3-C3,84-C4

Community Hall;BLD-CSTN-3-16-(31)-C: Supply and placing of the M-25 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER/MIXER with 20mm size graded machine crashed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like censent, fine aggregate (sand) coarse aggregate, water etc., to site and sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering, shuttering charges etc.,complete but excluding cost of steel and its fabrication charges (APSS No. 402) with minimum cement content as per IS code for finished item of work. for RCC SLABS, BEAMS (using Steel Scaffolding) Note: 1) The cement content is adopted as 380Kg/cum for estimating purpose only. The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 380 Kgs/ Cum the defference in cost shall be deducted. Roof Slab 150mm thick-Roof Siab +0.60m Projection on Four side Deduction for Temple Area

Community Hall;BLD-CSTN-3-15-(31)-B: Supply and placing of the M-25 Design Mix Concrete corresponding to 15 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site, sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, contering and suttering charges etc. complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per 15 code for COLUMNS, LINTELS, WATER TANKS, RCC WALLS IN BUILDINGS. Note: 1) The cement content is adopted as 380Kg/cum for estimating purpose only. The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 380 Kgs/ Cum the defference in cost shall be deducted.COLUMNS Above G.L Column C1(300X300)mm Column C2(300X450)mm Column C3(300X450)mm Column C4(300X600)mm

Community Hall;BLD-CSTN-3-7-(24) Using Concrete mixture all works up to Plinth Level: Plain Coment concrete nominal mix (1:5:10) prop (Cement: fine aggregate course aggregate) using 40mm size Hard Granite Machine Crushed Metal including cost and conveyance of all materials like cement, sand, 1 course aggregate water etc., to site, on all materials, labour charges, for mixing, laying, concrete, ramming in 15 cm layers, finishing top surface to the required level curing etc., complete for finished item of work. for foundation and under flooring bed. PCC Flooring