Municipality Tender

Supply and delivery of 160 KVA generator;Supply and Run of 32mm x 6mm copper strip including cost of all accessories and labour charges etc., complete.

Supply and delivery of 160 KVA generator;Providing independent earthing for Sophisticated Electronic equipment with 600mm x 600mm x 3.15mm thick copper plate rigidly fixed to 40mm dia G.I Pipe of 0.3mtr. length connected with reducer providing G.I funnel with wiremesh as per National Electric Code including C.C.Chamber of size 400m x 400m x 400mm covered with R.C.C. Slab filling with salt and charcoal giving earth connection from electrode G.I strip of 25mm x 6mm x 200mm length with all accessories and labour charges complete as per IS specification 732/1982 (Part II).

Supply and delivery of 160 KVA generator;Earth work excavation of Trench in hard ground soil, laying of U.G cables from 70 sqmm to 400 Sq,mm on sand cushion covering the cable with bricks and back filling of Trench duly providing route indicator embedded in C.C including cost and conveyance of materials and labour charges etc., complete.

Supply and delivery of 160 KVA generator;Supply and fixing of heavy duty type double compression weather proof type brass cable glands duly nickel plated as per BS6121 and IP66 complete with brass checknut, outer sheath sealing gasket and crimping type aluminium lugs suitable for 300 sqmm 3.5core XLPE insulated armoured cable etc complete. Makes: SMI / Commet / Dowels

Supply and delivery of 160 KVA generator;Supply of 3.5 Core 300 Sqmm XLPE insulated, 1100V grade armoured alluminium cable as per specification confirming to IS:7098 (Part - I) Makes :Makes : Torrent / Unicab / Universal / Polycab / Havells / Gloster / KEI / Finolex /

Supply and delivery of 160 KVA generator;Supply and Run of 40mm x 6mm G.I Strip including cost of all accessories and labour charges etc., complete

Supply and delivery of 160 KVA generator;Providing independent earthing for Important equipment with 40mm dia 'B' class 2.5m long G.I pipe and 19mm dia 'B' class G.I pipe of 0.3mtr. long connected with reducer providing G.I funnel with mesh enclosed in C.C.Chamber of 400m x 400m x 400mm with R.C.C. Slab cover duly providing staggered holes filling with salt and charcoal from the bottom of the pipe giving earth connection from electrode through G.I strip of 25 x 6mm x 200mm length with all accessories and labour charges complete, as per IS specifications 732/1982 (Part II)

Supply and delivery of 160 KVA generator;Distribution Panel Board: Fabrication, Transportation , Supply, Installation, Testing and Commissioning of suitable size 2000mm x 1775mm x 400mm , Indoor type panel of 14 guage CRCA sheet for termination of 2R 3.5C x 150 Sqmm alluminium cables with the following incorporated in the panel for Distributing the power supply . Main incoming: 1) 250A FP Changeover Switch on Load with open Execution.Makes : ABB / Siemens / Havells / Indo Asian / HPL / Standard / C&S / Benlo. 2) 250A, FP, 35/36KA , MCCB-1 Nos Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 35/36 KA with thermalmagnetic release Panel Mounted. Makes:L&T/schneider/Siemens/Legrand. MainSleaves tape for bus bar R Y B N-required length Insulators for busbar fixing (panel type) Extended earth terminals - 2nos with 40X6 mm G.I Strip Current Transformer- 250A/5A KAPPA make Out goings :1)125A,FP,25KA MCCB's- 2Nos Adjustable, Confirms toIS/IEC 60947-2 having Breaking Capacity 25KA with thermal magnetic release Panel Mounted. Makes:L&T/schneider/Siemens/Legrand. 2)63A,FP,16KA MCCBs-5 Nos.Adjustable, Confirms to IS/IEC 60947-2 having Breaking Capacity 16 KA with thermal magnetic release Panel Mounted. Makes: L&T/ chneider/Siemens/Legrand. 3) 6-32A SP MCBs 6 Nos- Voltmeter(0-415V)-Digital type with selector switch (conzerv Make)-1Nos with selector switch of Salzar/C&S make. Ammeter (0-1000A) - Digital type with selector switch ( conzerv Make)-1Nos with selector switch of Salzar/C&S make. LED Indicating Lamps:3 Nos L&T make 250A TPN Alluminium Bus bar (30mmx10mmxSuitable length) - for -Main 20x10mm for links - Required length The panel Size approx: 2.0mX1.775mX0.4m The connections should be done with above mentioned Bus bar strips with bottom/Top entry cables. The control wiring for metering shall be done with 1.5sqmm copper flexible cable of Polycab make. The above Panel shall be cleaned with 7 tank process and painting with one coat of red oxide and two coats of powder coated light grey as per IS 631 of (5) etc complete and provided suitable base channel of 75X40X6mm size on suitable brick masonary pedastals CM(1:4) etc., complete as directed by the Engineer- in - Charge.

Supply and delivery of 160 KVA generator;160 KVA DG SET WITH AMF PANEL: Supply, Transportation, erection and commissioning (Excluding Foundation) of 3 Phase, 415, 50Hz, water cooled multi cylinder diesel generator set with alternator of 160 KVA/ 128 KW, 3 Phase, 415, 50 Hz, 154 BHP, water cooled multy cylinder diesel generator set with alternator of 160 KVA output continious rating at 0.8 p.f. Batteries. KVA out put continuous rating directly coupled Engine, Alternator and radiator with guard and mounted on a common base frame of Robust construction and complete with AMF control panel having IP-52 protection, anti vibration mounts of reputed make, Acoustic Enclosure as per CPCB norms IV, sound absorbing material to restrict sound level up to 75 dB up to 1 mtr distance and etc as per the following specifications mentioned.A. Alternator : Kirloskar / Stamford / Crompton Greaves / Leroy Somer make. The alternator of the output rating shall be 3 Phase, 415V, 50Hz, Ac , 0.8 P.F. lagging at 1500 RPM. The alternator is self excited, self regulated, and shall confirm to IS: 13364 of 1992 with regulation of +5% from no load to full load. degree of protections shall be IP21. B.Diesel Engine : Kirloskar / Cummins / Mahindra & Mahindra / Greaves Cotton Diesel Engine start, developing suitable BHP output at 1500 RPM with mechanical / electronic governing so as to enable the alternator to give 160 KVA continuous output at 0.8 P.F. lagging at NTP conditions. The diesel engine shall be capable of providing 10% O/L for 1 Hr for every 11 Hrs of continuous running at full load. The engine with 1st filling of oil and Diesel etc.- 01. Exhaust pipe of required size as per the standards. 02. Diesel tank suitable for 8 to 12 Hours running capacity. 03. Residential Silencer. 04. SMF Batteries with leads as per the Manufacturer standards C. AMF Control Panel:- AMF control panel shall be fabricated with 16SWG CRCA sheet shall be totally enclosed with dust and Vermin proof, floor mounted / wall mounted type and shall be comprising the following.01. Voltmeter with selector switch.02. 4 Pole MCCB incomer of 250 A rating of Schenieder / LK make for EB and DG . 03. Ammeter with selector switch with CTs. 04. PF Meter and frequency Meter. 05. Indicator lamps (set Run, Load ON) with fuses. 06. KWH Meter of required rating. 07. Set of control fuses and current transformer. 08. Input Terminal board and output Terminal Board. 09. Battery charger with transformer rectifier unit. 10. Alternator supply air break contactor of LK make.11. Main supply air break contactor of LK make. announciation . control relays and timers with one mode selector switch, set of push buttons. 14.Control cable up to 15 Mtrs 2.5Sqmm 6 Core