Municipality Tender

gym;SIT UP BOARD Providing & fixing Sit up board from G.I. pipe. Dimensions:(L×W×H)=1600×530×700mm 1) Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10mm thickness. 3) Leg Support - Ø 60 mm OD "B" class G.I. Pipe. 4) Remaining Frame - Ø 48 mm OD "B" class G.I. Pipe 5) Backrest Seat- made of M.S Checkered plate sheet of 3 mm thickness size 1100 mm ×310 mm. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

gym;HORSE RAIDER Providing & fixing Horse Raider made from G.I. pipe. Dimensions:(L×W×H)=1100×600×1250mm 1) Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Remaining frame-Is made by Ø 48 mm OD "B" class G.I. Pipe. 4) Seat frame-Is made by Ø 42 mm OD "B" class G.I. Pipe. 5) Seat position must be horizontal to 110-120 degree. 6) Handle- Ø 33 mm OD "B" class G.I. Pipe. 7) Paddle Vertical support- Ø 60 mm OD "B" class G.I. Pipe 8) Handle frame- Ø 42 mm OD "B" class G.I. Pipe. 9) Foot pipe- Ø 33 mm OD "B" class G.I. Pipe. 10) Seat-5 mm thickness is used. Bearing bush closing cap- GI/SS material. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Grips- High Quality rubber Ø 46 mm OD .Coating-Best quality of powder coating 80100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

gym;PARALLEL BAR Providing & fixing Parallel Bar made from G.I. pipe. Dimensions:(L×W×H)=2450×600×1450mm 1) Main Frame-Made from G.I ("C" class) pipe Ø 90 mm OD. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Supporting Structure - Ø 42 mm & Ø 48 mm OD "B" class G.I. Pipe. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-360 kg. Safety Instructions and Exercise chart ? start & finish position stick on product.

gym;LEG EXTENSION Providing and fixing Leg Extension made from G.I. pipe. Dimensions:(L×W×H)=1000×620×910mm 1) Main Frame-Ø 114 mm OD G.I ?C" class pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Handle- made up of Ø 42 mm OD "B" class G.I Pipe. 4) Seat frame-Ø 42 mm OD "B" class G.I. Pipe. 5) Seat-300×300 mm×2 mm thick with corner fillet for safety. 6) Leg Frame- Ø 42 mm OD "B" class G.I. Pipe. 7) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 8) Bearing Bushes-Ø 60 mm OD seamless pipe. Top Closing Caps-SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product. 12

gym;HIP TWISTER Providing & fixing Hip Twister from G.I. pipe. Dimensions:(L×W×H)=1550×1550×1350mm 1) Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Seat plate support - Ø 60 mm OD "B" class G.I. Pipe. 4) Seating ring- Ø 33 mm OD "B" class G.I. Pipe made by rolling. 5) Seating ring support - Ø 33 mm OD "B" class G.I. Pipe. 6) Remaining Frame ? Is made by Ø 60 mm OD "B" class G.I. Pipe. 7) Standing plate is made of Aluminium- Ø 300 OD × 10 mm thick plate. 8) Seating seat position and other two standing position plates are fixed 120 degrees each from other. 9) Handle- Ø 33 mm OD "B" class G.I. Pipe made by rolling. Top closing cap-dome shaped by SS material. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Bearing bush closing cap- SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-360kg and only three persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

gym;LEG PRESS DOUBLE Providing and fixing Leg Press Double made from G.I. pipe. Dimensions:(L×W×H)=2000×400×1600mm 1) Main Frame-Ø 114 mm OD G.I ?C" class pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Seat frame-Ø 42 mm OD "B" class G.I. Pipe. 4) Seat-320×300 mm×2 mm thick G.I seat with corner fillet for safety. 5) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated Reputed brand. 6) Bearing Bushes-Ø 60 mm OD seamless pipe. 7) Bearing bush closing cap- SS material. Top Closing Caps-SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight240kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

gym;CHEST PRESS DOUBLE Providing & fixing Chest press double made from G.I. pipe. Dimensions:(L×W×H)= 2100×750×2150mm 1) Main centre pipe- Ø 114 mm OD G.I ("C" class) pipe. 2) Foundation plate- M.S. round plate of Ø 220 mm & 10 mm thick. 3) Remaining frame-made up of Ø 42 mm OD G.I "B" class pipe. 4) Handle-made up of Ø 33 mm OD G.I "B" class pipe. 5) Link-made up of Ø 48 mm OD G.I "B" class pipe. 6) Seat & back rest- 360×300×2mm thick G.I. seat with corner fillet for safety. 7) INTERNAL LIMITORS is used for this equipment because at this stage maximum level reaches, if this is operated beyond the maximum level which causes to physical damage that?s y Limiters are used to resist an equipment. 8) By using Limiters equipment can be handled smoothly. 9) Handle is connected with frame by 8 mm laser cutting MS profile. Top closing cap-dome shaped by SS material. Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. Bearing Bushes-Ø 60 mm OD seamless pipe. Bearing bush closing cap- SS material. Grips- High Quality Rubber Ø 46 mm OD. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized Maximum loading weight 240 kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

gym;ROWING MACHINE/ROWER Providing and fixing Rower made from G.I. pipe. Dimensions:(L×W×H)=1100×710×1150mm 1) Main Frame-Made from G.I ("C" class) pipe Ø 114 mm OD. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. Handle- Ø 33 mm OD "B" class G.I. Pipe. Angle between handle and horizontal Surface is 75-80 degrees. 3) Remaining frames- Ø 42 mm OD "B" class G.I. Pipe 4) Seat-320×300 mm×2 mm thick G.I seat with corner fillet for safety. 5) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 6) Bearing Bushes-Ø 60 mm OD seamless pipe. 7) Bearing bush closing cap- SS material. Handle Bars- High Quality Grip Rubber. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

gym;PUSH UP DIP STATION Providing and fixing Dip Station made from G.I. pipe. Dimensions:(L×W×H)=1550×710×1550mm 1) Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2) Main frame connecting pipe- Ø 33 mm OD "B" class G.I. Pipe. 3) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 4) Nuts & Bolts Closing Caps-All nuts & bolts closing caps made from GI/SS material Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized.Maximum loading weight-240kg and only two persons can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.

gym;AIR WALKER Providing & fixing Air Walker made from G.I. pipe. Dimensions:(L×W×H)= 1170×320×1400mm 1) Main Frame- Ø 114 mm OD G.I ("C" class) pipe. 2) Foundation Plate-M.S round plate of Ø 220 mm & 10 mm thickness. 3) Paddle Vertical support- Ø 60 mm OD "B" class G.I. make Apollo Pipe 4) Handle- Ø 42 mm OD "B" class G.I. Pipe dually bending design. 5) Supporting pipe-Ø 33 mm OD "B" class G.I. Pipe. 6) Footrest-cast iron 320×130×2 mm thickness and M.S/G.I plate of 305×130×2 mm. 7) Aluminium foot Plate size of L-315 mm,W- 118 mm ,T-1.5 mm. 8) Top closing cap-dome shaped by SS material. 9) Bracket-6 mm thick laser profile is use to support paddle frame. 10) Bearing-Deep Grooveé Self Aligning Ball Bearings with permanent lubricated reputed brand. 11) Pin- Ø 25 mm M.S bright bar pin. 12) Bearing Bushes-Ø 60 mm OD seamless pipe. 13) Bearing bush closing caps- SS material. Coating-Best quality of powder coating 80-100 microns thickness. Hardware-Grade ? 4.6 galvanized. Maximum loading weight-120kg and only one person can use at a time. Safety Instructions and Exercise chart - start & finish position stick on product.