Municipality Tender

BOQ;Removal of Old Existing Cement Sheets with all operational charges and all labour charges etc., complete for finished item of work.

BOQ;Supplying and fixing of M.S Rect Flat -25mmx10mm thick horizontal,no's-2, length-18 ,2)M.S Rect Flat-25mmx10mm thick vertical joints ,no's-12, length-0.45including cost and conveyance of all materials ,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work.

BOQ;Supplying and fixing of M.S Rect Flat -25mmx10mm thick horizontal,no's-2, length-19, 2)M.S Rect Flat-25mmx10mm thick vertical joints ,no's-12, length-0.45 including cost and conveyance of all materials ,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work.

BOQ;Supplying and fixing ofM.S Rect Flat -25mmx10mm thick horizontal,no's-2, length-40.10,. 2)M.S Rect Flat-25mmx10mm thick vertical joints ,no's-26, length-0.45 including cost and conveyance of all materials ,Locking arrangment, Ornamental pieces etc ,cutting, bending, welding including all operational charges and all labour charges etc., complete for finished item of work.

BOQ;Roofing: - Roofing will be provided with 0.5mm thick galvanized / pre painted G.I. profiled sheets fixed to the purlins with 14 size self-drilling screws with neoprene washer. Side laps are stitched with self tapping/ drilling screws. End laps are to be sealed with 25x3 mm Butyl tape. The sheets are provided with anti-capillary grove.

BOQ;Dismatling of existing structures like culverts, bridges,retaining walls and other structures comprising of Masonary,cement,concrete,wood worl,steel work, Including T&P and scaffolding wherever necessary sorting the dismatied material,disposal of Unservicable materials and stacking the materials with all lifts and lead of 1000m

BOQ;BLD-CSTN-9-1-(99) : Flooring with Polished Shahabad/Tandur stones slab of all sizes between 15-18 mm thick (Tandur Stone slabs) set over base coat of CM (1:8) over already laid CC bed / RCC Roof Slab, including neat cement slurry of honey like consistency spread @ 3.3 kgs per sqm. & Jointed with neat cement to full depth including cost of all materials like cement, sand, and water and flooring stones and labour charges for dressing of flooring stones etc., complete for finished item of work, including the cost and conveyance of all materials.

BOQ;Supply and Fixing of single leaf shutter, Door Size 0.90x2.10 mtrs with salwood Frame of sections size 75mm x 100mm with Flush Door Shutter Solid Bond Wood block board type with commercial ply on both faces of 35mm thick including cost of fixtures such as MS Powder coated Tower Bolts 150mm long 1 Nos, M.S power coated butt hinges 150mm long-3Nos,MS Powder coated Handles 150mm long 2 Nos, 300mm long MS Powder coated Aldrops 1No, 300 mm long MS Powder coated Flat latches 1No, Door stopper 1 Nos, MS Hold fasts 6 Nos 300mm long , cost and convenyance of all materials to site all Labour charges such as Fixing of Door Frame and shutter Fixing in position , with Hardware fixtures etc., complete for finsihed item of work.

BOQ;TBSC-M.II-01 : Providing and fixing 2 Track 2 glass shutter sliding Windows fabricated from roll formed sections made of Galvanized Steel Colour Coated/ Powder Coated (Base Steel as per IS 513 ?D? quality, Galvanized as per IS 277 with Zinc of 120 GM/Sq.mtr) with total coated thicknessof 0.58 mm. Primer coat with epoxy primer of 5?7 micron thick, finish painted with polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or Powder Coated with pure Polyester Powder up to 50-60 microns thick. Section for external frame should be of 44x 59mm, Section for glass shutter should be of 35 x 49 mm Section for euro groove should be 25 x 24mm( Aluminium/Plastic)and Lap Strip should be of 30 x 41mm(Aluminium/Plastic).shutter should be provided with a glass of 5mm Plain Float Glass. Corner bracket for External frame made of Steel/Polypropylene, Corner Bracket for Internal frame made of Steel/Polypropylene, Touch Lock, Rollers, wool pile for lap strip & euro groove, Bump Stop Base & Rubber for shutter stopper. Ethyl Propylene Diamine Monomer (EPDM) Gasket should be used all around glass in shutter. The Frame Section should be cut to length and mitre joined with Corner brackets & Shutter Sections should be cut to length and mitre joined with Corner Bracket. Window Frame should be fixed to brick/ concrete masonry by using Nylon selfexpanding caps and driving MS electroplated 80mm long screws into the caps through frames.10mm square guard bars with 6? pitch (152.4mm) max to be fixed wall to wall complete for finished item of work.