Municipality Tender

Building;Supply, Delivery and fixing of PVC Pipes including cost and conveyance of all materials and labour charges etc., complete 25mm dia 10kg/cm2

Building;Painting Walls with Snowcem or other equal and approved Water Proof Cement Paint over Priming Coat, 2 Coats (All Colours)

Building;White cement painting two coats with Birla white cement Suryacem to give an even shade after thouroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials , labour charges and incidental such as scaffolding , lift charges etc., complete for finished item of work but excluding conveyance of materials.(BLD-CSTN-11-5)

Building;Dadooing to walls with glased colour tiles of any size 1 st quality set over a base cemont of CM 1:3 Prop 12 mm thick and neat cement slurry of hony like cousisitincy spread as the rate of 3.30 kg per 1 sqm and joint with white cement mixed with pigment of machanics shade including cost and convaynce of all meterials ,for finished item BLDS. CSTN.9.18-116

Building;Flooring with ceramic tiles,no skid red or white ceramic non skid tiles 400X400mm and thickness 7-8mm and set over base coat of cement mortar(1:8), 12mm thick over CC bed already laid or RCC roof slab including neat cement slurry of honey like consistency spread @3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigmen to matching shade ,including cost of all materials like cement, sand water and tiles etc. complete for finished item of work, but excluding the cost of conveyance of all materials.

Building;PCC M15 Design mix MORTH 12.84 table using 20mm gauge machine crushed HG metal from approved quarry including cost and conveyance of all materials like OPC 53 Grade Cement of Make: ACC/ Ultratech/ CCI/ Lafarge/ Penna Premium etc., fine aggregate i.e., Godavari Sand (Bhadrachalam Quarry), coarse aggregate, potable drinking water etc. to site, sales & other taxes on all materials, machine mixing charges, laying concrete in position, vibrating, curing, centering charges, overheads & contractors profit etc., for finished item of work

Building;Supplying & fixing approved make Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap:630 mm x 440 mm

Building;Providing, supplying & fixing of Top hung shall be provided with 4.5 mm Pin Head glass,standard hardware, single point locking using cockspur handle and friction stays. Wall thickness of frame, mullion and sash shall be 2.4 mm., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work.Ventilator With Exhaust Fan Provision made out of multi chambered uPVC sections with TPV Gasket for sash & Glazing bead shall be coextruded with Grey colour soft PVC and reinforced with Galvanized Iron profiles throughout the window. The outer frame having a overall size of 60mm x 55 mm x 2.40 mm withreinforcement of 1 mm thickness, Mullion with overall size of 74 mm x 60 mm x 2.40 mm with reinforcement of 1 mm thickness and Sash with overall size of 75 mm x 60 mm x2.40mm with reinforcement of 1.0/1.2 mm thickness. (Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin).Glazing bead for fixing of glass shall be of size 34 x 20mm coextruded with soft PVC gasket. Ventilator

Building;Providing and fixing 30mm thick FACTORY MADE BOTHSIDE RELAM SOLID PANEL PVC DOOR SHUTTER consisting of frame made out of MS. Tubes of 19gauge thickness and size of 19mmX19mm for stiles, top and bottom rails. MS. Frame shall have a coat of steel primers of approved make and manufacture. MS. Frame covered with 5mm thick heat moulded Prelam Pac ?C? channel of size 30mm thickness, 70mm width out of which 50mm shall be flat and20mm shall be tapered in 450 angle on either side forming stiles; and 5mm thick, 95mm wide Prelam Pac sheet out of which 75mm shall beflat and 20mm shall be tapered in 450 on the inner side to form top and bottom rail 115mm wide Prelam Pac sheet out of which 75mm shall be flat and 20mm shall be tapered on both sides to form lock rail. Top, bottom and lock rail shall be provided either side of the panel. 10mm (5mmX2) thick, 20mmwide cross Pac sheet shall be provided as gap insert for top and bottomrail. Panelling of 5mm thick both side Prelam Pac sheet to be fitted in the MS. Frame welded/sealed to the stiles & rails with 7mm(5mm+2mm) thick X 15mm wide Pac sheet beading on inner side, and joined together with solvent cement adhesive etc. an additional 5mm thick Pac strip of 20mm width is to be stuck on the interior side of the ?C? channel using Pac solvent cement adhesive ,hold fasts and fixtures and others etc. complete as per direction of Engineer ? in-charge, manufacture specification and drawing

Building;Plastering in 12 mm thick with C.M (1:4) prop with dubara sponge finishing including cost and conveyance of all materials and all labour charges etc., complete for finished item of work.

Building;Brick work in CM (1:6) prop. With 2nd class Bricks ground moulded including C&C of all materials, labour charges incld. C&c of all materials, labour charges etc. complete.

Building;Providing high yield strength deformed HYSD steel bars Fe-415as per IS1786-1985 of 8mm to 40mm dia mtr cutting, bending to required sizes and shapes, placing in position with cover blocks approved size and binding wire of 20 SWG forming grill for reinforcement work as per approved design and conveyance of bars from approved sources to site of work including cost and convedyance of binding wire cover blocks operation, labour charges

Building;slab

Building;Roof beam

Building;columns

Building;walls

Building;Providing VRCC M- 30 design mix corresponding to Table 9 of IS 456 using 20mm size graded machine crushed hard granite metal from approved quarry including cost and conveyance of all materials to site and all operational, incidental and labour charges such as machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work and including centering, shuttering. (plinth, slab beams) Footings

Building;Construction of RR masonry 2nd sort in CM (1:6) prop. Including c&c of all materials & labour charges etc. complete.

Building;PCC (1:5:10) prop.(nominal mix) Using 40mm HG metal including cost and conveyance of all materials, mixing., lyaing, tamping, curing, labour charges etc.complete.

Building;Supply and Filling of quarry dust including cost and conveyance of all the materials etc., complete as per drawing and technical specification Clause 305.3.9 MORD & 304 MORTH

Building;Earth work excavation and depositing on bank with an initial lead of10Mts. and lift of 2 Mts. in all soils including Labour charges etc.complete.