Municipal Corporation Tender

Developmental works in Waddepally Filter Beds;Support & Installation & Commissioning Charges of HSC pumpset of CF8M stainless steel impeller along with casing at requested site in alignment wih existing motor and other related necessary mechanical Accessories: 1) Pair of coupling with bolts,2) Bed Plate, 3) Foundation bolts & 4) Coupling and guard , etc as per site requirement

Developmental works in Waddepally Filter Beds;Supply and delivery of Wilo Mather & Platt SCP (300-380)or (300-400) HA make Horizontal Splitcasing Pumpset of CF8M stainless steel impeller along with casing Duty : 300/39 Discharge -947 M3/Hr @36-45M head suitable for 240 HP/180 KW kirloskar motor

Developmental works in Waddepally Filter Beds;Supply and delivery of New Motor capacity: 180 KW/240 HP Voltage Rating:415 V , Frequency -50 Hz , KW-180 KW, HP - 240 HP,RPM- 1495, No. of poles- 4 , Type of mounting - Foot mounted, Type of cooling- TEFC, Duty- S1, Energy Efficiency Motor- IE2, Ambient temp - 50 degree centigrade, Protection class - IP 55, Insulation class- Fsuitable to the existing pumpset at Waddepally filters of Make: Kirloskar/CGL/ABB

Developmental works in Waddepally Filter Beds;Supply, fabrication and fixing in position of Stainless Steel including cost and conveyance of all material and all labour chages etc complete. (Stainless Steel Round Bars 304s31 (1.4301) Smooth Turned IMA

Developmental works in Waddepally Filter Beds;BLD-CSTN-9-5-(134) : White washing two coats with whiting of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

Developmental works in Waddepally Filter Beds;Plain Cement concrete M15 (1:2.5:5) using ,20,10 mm metal with concrete mixture.For Vent Portion

Developmental works in Waddepally Filter Beds;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Developmental works in Waddepally Filter Beds;R.C.C grade M 20 using Concrete mixer (Nominal Mix) using 20 mm & 10 mm Graded Metal (MORD) Walls

Developmental works in Waddepally Filter Beds;Roof Slab 150mm thick

Developmental works in Waddepally Filter Beds;Roof Beams

Developmental works in Waddepally Filter Beds;Columns, 25mm

Developmental works in Waddepally Filter Beds;Pedastal for all Columns

Developmental works in Waddepally Filter Beds;Footings for North 20mm

Developmental works in Waddepally Filter Beds;BLD-CSTN-3-14-(31) - A : S: Supply and placing of the M-20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site . sales & other taxes on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, vibrating, curing, centering and suttering charges etc.,complete but excluding seignorage charges, cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code for PLINTH, PEDESTALS and FOOTINGS. Note : 1) The cement content is adopted as 350Kg/cum for estimating purpose only.The exact quantities will be as per mix design. 2) As per mix design, if the cement content is found to be less than 350 Kgs/ Cum the defference in cost shall be deducted

Developmental works in Waddepally Filter Beds;Providing Plain Cement concrete (1:4:8) using 40 mm metal with concrete mixture. All work upto plinth level

Developmental works in Waddepally Filter Beds;BLD-CSTN-2-8 (16) : Filling with Sand in trenches, sides of foundations and basement with initial lead in layers not exceeding 15 cm thick, consolidating each deposited layer by watering and ramming including cost and conveyance of water to work site and all operational, incidental, labour charges, hire charges of T & P etc., complete for finished item of work. (APSS NO. 309 & 310)

Developmental works in Waddepally Filter Beds;Earthwork in excavation for as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD

Developmental works in Waddepally Filter Beds;Dismantling of cement concrete pavements by mechanical means using pneumatic tools breaking to pieces not exceeding 0.02 cum in volume and stock piling at designated locations and disposal of dismantled materials upto a lead of 1000 m, stacking serviceable and unserviceable materials separately

Developmental works in Waddepally Filter Beds;Engaging of Labour (UN-SKILLED CATEGORY) on hire basis to work in amy place in GWMC Limits (Core & Non Core areas, including cost of labour Charges etc,. Complete

Developmental works in Waddepally Filter Beds;Engaging of JCB machine on hire basis to work in amy place in GWMC limits (Core & Non Core areas, including cost of fuel charges hire charges and driver wage, including driver batta on hourly basis from one hour to five hours / day to one year 8 hours / day the rate 8 hour / day the rate to be quoted for the item given below as per the uint rate.