Municipal Corporation Tender

others;Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking the serviceable material with all lifts and lead of 1000 m as per Technical Specification Clause 202 MORD / MORTH RBR-STCL-5-II(A)

others;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock TBSP-E.VI-02

others;Supply, Installation and commissioning approved make floor mounted Close Coupled wash down EWC conforming to IS:2556 (Part 8)-2004 with 'P' or 'S' trap with dual flush porcelain cistern fixed on wash down EWC with all internal parts of dual flush cistern, ultra solid seat cover of approved make with rubber uffer and cap & 15 mm angle stop cock & 450 mm long PVC inter connection pipe wall flanges all of provedmakeetc.completeforfini sheditemofwork inallrespects:SpecialColour-Grade-III FLOOR MOUNTED EWC - Hindustan Sanitary ware/ Parryware/ Neycer/ CERA /Jaquar / Somany SoR 19-20 Pg. No.190/259 TBSP-E.II-06

others;Providing dadooing to walls with glazed full body ceramic tiles of 300 X 450MM size and thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads and contractors profit complete for finished item of work.

others;Flooring with Virtrified tiles(of size 600 x 600 mm and thickness between 9-11 mm 1st quality conforming to IS:13711, IS:13712, IS:13630 (Parts 1 to 15) of 1st quality set over base coat of cement mortar 1:8, 12 mm thick over CC bed already laid including nead treatment of slurry of honey like consistency spread @ 3.3 kg per sqm & past jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc., complete . (BLD-CSTN 9-5) [51]

others;Supply and dlivery of office chair that should be revolving chair with Permanent contact Mechanism, 360 degree swivel, l4 degree back tilt, tilt tension adjustment, upright locking, Pneumatic height adjustment. Size: 70cm W x 70cm D x 98cm H (minimum) - l l1cm H (maximr"rm). Seat / back should be made up of 1.2 - I .5cm thick hot pressed ply"wood. upholstered with fabric and moulded polyurethane foam (moulded with density : 45-50+lkglm3 and hardness : 2022+l-2) together with moulded seat and back covers. The back nylon mesh should be desined with contoured lumbar support for extra comtbrt. Size olback should be 43cm Wx 46cm H (approx). seat size : 47cm W x 50cm D (approx). Armrests should be made ofblack integral skin polyurethane and reinforced with Mild Steel. The armrests should be fixed to black powder coated armrest bracket made of 0.5 - 0.6 cm thick LIot Rolled steel fitted with claddings made of injection moulded Polypropylene. Pedstalis fabricated tiom 0.2-0.3cm thick Colled Rolled steel and 5 nos. twin castor wheels

others;Supply and delivery of Amaze High Back Mesh Chair * Headrest * AC 60 Mesh * Fabric Upholstered Cushion Seat * Single Lock Synchro Mechanism * Adjustable Lumbar Support * One Way Adjustable Arms (Height)* Nylon Base ( Make Featherlite)

others;Supply and dlivery of OfficeTable 4x2 Frame size 4 feet x 2 feet 16 guage MS round pipe with powder coating One side 3 draws Top 25mm Pre laminate board 2mm edge lipping

others;Supply and delivery of Office Table of MODEL:EDGE 12060 SIZE:L1200L X 600D X750 HT Mobile Pedestal 2d + 1f SIZE:400W X 450D X 640HT Specifications Table top ? 25mm pre lam particle board with 2mm PVC edge lipping Understructure ? Powder coated 50 x 50 perform legs and 40 x 20 cross beamWire management ? 450mm Aluminium flip up with soft close and PVC cable tray for mounting the switch / sockets. Flip up can accommodate one 8module + one data port. ( Make Featherlite)

others;Supply of acrylic emulsion paint interior premium grade having VOC content less than 50 gm/lit

others;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 3 track sliding doors with mesh shutter provision ? (2-glass shutters)- 95 -Series duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (108 mm x 45 mm)/(95.50 mm x 60 mm) x 2.20 mm for outer frames, (75 mm x 39 mm)/(66 mm x 42 mm) x 2.20 mm for sliding door shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.2 mm prefabricated & welded through fusion welding the door sash shall be fitted with 6 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co extruded with Grey colour soft PVC. Door shall be provided with standard hardware & multi point locking system of Patio/Bent espagulate .the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories, labour charges for transportation, erection at site complete for finished item of work. (TBSC-L.III-09)

others;Plastering 12mm thick inside in two coats with a base coat of 8mm thick in CM (1:5) prop and top coat of 4mm thick in CM (1:3) prop. with dubara sponge finish including cost and conveyance of all materials and water to work site , labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work. (2nd floor)

others;Installation of Split Air Conditioners. (Elec.6.7.28)

others;Providing 2 runs of Copper tubes for suction and liquid between indoor and outdoor unit for split/Cassette Air-Conditioner including foaming etc., complete.(Elec.6.7.2) a) 3/4" x 3/8", b) 5*8" x 1/4", c) 1/2" x 1/4")

others;Supply, Fabrication of 1set MS bracket suitable for fixing outdoor unit of split AC unit. (Elec.6.7.1)

others;Supply and Transportation of split AC unit with high wall mounted 100% copper indoor unit and outdoor condensing unit Hermetically sealed compressor suitable for operation on 230V, 50Hz, 1Phase AC supply capable of performing cooling dehumidifying air circulating and filtering with cooling and condensing units with 3.0 mts of copper piping, insulation kit and 4 mts of 3 core copper flexible chord (Voltage range 160- 264 volts) and cordless remote control with 5 years warranty compressor for 5 years including servicing 2.0 / 1.8 TR 2-3 Star capable of delivering 21600 BTU/hr and above of makes Daikin / Thoshiba / O General / Carrier / Blue Star / Hitachi or equivalent (Elec-6.1.1)

others;Supply, Transportation of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.0, Air delivery minimum 235 CMM, 350 RPM( tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75°C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient / Halonix / CromptonELEC- 5.1.1

others;Supply and transportation of 20W +/- 10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD ELEC-3.3.10

others;Supply and transportation of 5 W / 6 W +/-10% (>= 550 Lumens) -- LED Spot Light Recessed mounting with housing made of Powder coated Pressure die cast aluminium , IP20, with wide operating voltage range, Power factor > 0.9, Surge protection: > 2KV, System efficacy of >90 lumens/watt, CCT: 3000K - 6500K as desired by the department and as per IS, CRI >80, and THD is less than 15% etc., complete with 5 years warranty. LUMINAIRE MAKE : Fortune Arrt / Capart / Kashyap BLU / Million / Trinic / Sieger / Stanjo / Promptec / Lighting Technologies / Renesola / C&S / RR Electric / Rhino ELEC-3.3.2

others;Wiring with 2 runs of 14/0.3mm (1.5 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

others;Supply of ISI ---25 mm --outer dia heavy grade with IS:9537 part 3 rigid PVC pipe. Makes : Sudhakar / Finolex / Modi / VIP / Precision / Universal / Million Plast / DEC / Beljin ELEC-1.2.1

others;Plastering 12mm thick inside in two coats with a base coat of 8mm thick in CM (1:5) prop and top coat of 4mm thick in CM (1:3) prop. with dubara sponge finish including cost and conveyance of all materials and water to work site , labour charges such as scaffolding, mixing mortar lift charges curing etc., complete for finished item of work. (2nd floor)

others;Supply and Fixing of Single leaf glass Door of KLIO SINGLE LEAF STYLED GLASS DOOR SYSTEM, Door Frame : KL 0092 Door frame of size 92x44mm made of Natural Anodized Aluminum, Action : Single, Construction : 10mm thick Toughened Glass door shutter with KL 0045 Aluminum Frame of size 75x40mm made of Natural Anodized Aluminum, Hinge Type : 4 Nos Butterfly Hinges, Lock Set : Dead Lock, Door Handle : Offset D hanfle, Door Closer : Surface mounted door closer, Door Stopper :Floor Mounted Magnetic Stopper, Hardware Make : GEZE/Equivalent.

others;Supply and making of Double side laminate Partition of Alluminium Paneling using 50mm *25mm for frame work ,12mm thick plywood fixed on both side of the surface of the frame work and using 1mm thick laminate sheet of approved make on both the faces of plywood panel,including cost and conveyance of all materials including all labour charges etc to complete the finished item of work

others;Supply and fixing of Cement Bonded Prelaminated Particle Board aluminium glazed partitions using 10MM Cement Bonded Prelaminated Particle Board and 5.00 mm thick plain glass to full height. Using with Cement Bonded Prelaminated Particle Board to a height of 0.91 meter at bottom panel and remaining height with glass and aluminium sections anodized to 12 to 15 microns and of sections of size 37mm x 62mm and 1.5mm thickness with one meter centre to centre duly fixed with clip beading on both sides including fixing the frame to pillars by M.S. flats, bolts and nuts including cost and conveyance of all materials etc., complete as directed during execution. TBSC-K.IV-13

others;Providing and fixing false ceiling consisting of 600 mm x 600 mm, Solid PVC insulation panels having wall thickness of 1mm thick plain PVC rigid foam sheet and EPS as defined in of desired thickness depending on insulation required shall be insert in a framework made using anodized aluminium Tee section of sizes 1?X1? (25X25mm, 19 gauge or 1mm thick) in square pattern of grid sizes of 2?X2? (600X600mm). The aluminium framework is supported from the ceiling with the help of G.I. hook and G.I. wire/6mm.M.S. rods of required sizes to maintain proper level etc. the aluminium framework is supported on side wall with the use of aluminium 1?X1? (25X25mm) angles, complete as per direction of Engineer-in Charge & drawing TBSC-K.I-29