Municipal Corporation Tender

Civil Work;Supply of Pre-cast CC blocks for kerbing made with rubberized moulds of M30 grade Design mix with 350 kgs Cement / Cum. Of concrete, 20mm to 6mm nominal size (SS 5) Hard Granite machine Crushed metal @ 0.80 Cum/cum. Of concrete and sand @ 0.40 Cum/cum. of concrete for RCC works including cost and conveyance of all materials like cement Sand Coarse Aggregate Water etc., to site and labour charges for mixing, laying Concrete, tamping, vibrating, lifting, curing finishing top surface including hire charges of machinery and vibrator complete for finished item of work. and transportation of precast blocks from casting site to work site of each 0.60m length (CC block as per design & specification etc., complete

Civil Work;Supply and Delivery of 20.00 HP dewatering pumps

Civil Work;Supplying and fixing iron grills of 25mm square bars in 50x50x6mm. M.S. Angle frames including cost and conveyance of all materials and fixing in position fabrication charges etc., complete as per specification

Civil Work;Supply and delivery of DI covers of size 700X700MM grate with base frame of size 850x850 mm ,Heavy duty of Grade D-400 manufactured as per specification BS EN 124 for Man hole covers and Drainage Gratings suitable for Carriage ways of roads(including pedestrian streets),hard shoulders,parking areas for all types of road vehicles with a load bearing capacity of 400 kN including cost of material,labour charges for manufacturing ,loading ,unloading including transpotation charges etc.

Civil Work;Curing compound including Spraying at 0.25ltr/Sqm

Civil Work;cost for cutting groove per m

Civil Work;Supplying of dish floating with power floater, mechanical trawelling, finishing with sound edges and corners, including hire and operational charges of machinery, labour, fuel etc. complete for finished item of work as directed by Engineer-in-charge of the work.

Civil Work;Supply and placing of the M-30 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 350 Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water, centering etc., to site, all labour charges for mixing, transported to site by transit mixer,pumping and laying concrete, centering and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

Civil Work;Supply & placing of impermeable plastic sheet 125 micron thick over learn concrete mix as separtion membrane including all charges etc completed

Civil Work;Supply and placing of the M-10 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 220Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water, centering etc., to site, all labour charges for mixing, transported to site by transit mixer, pumping and laying concrete, centering and vibrating, curing and finishing etc. complete, for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

Civil Work;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH. with out Paver Finisher

Civil Work;For Slab

Civil Work;For walls

Civil Work;For sump raft

Civil Work;Supply and placing of the M20 Design Mix Concrete corresponding to IS 456 using WEIGH BATCHER / MIXER with 20mm size graded machine crushed hard granite metal (coarse aggregate) from approved quarry including cost and conveyance of all materials like cement, fine aggregate (sand) coarse aggregate, water etc., to site on all materials including all operational, incidental and labour charges such as weigh batching, machine mixing, laying concrete, curing etc.,complete but excluding cost of steel and its fabrication charges for finished item of work (APSS No. 402) with minimum cement content as per IS code from standard suppliers approved by the department including pumping, centering, shuttering, laying concrete, vibrating, curing etc. complete but excluding cost of steel and its fabrication charges for finished item of work.

Civil Work;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126)

Civil Work;Lowering the RCC S/S pipes carefully into the ready made trenches laying them true to alignment and gradient, jointing with rubber rings and testing including filling with water lead upto 500 meters excluding cost of rubber rings as per BIS No. 783/1985. complete including all Charges as directed by the Engineer - in - Charge. 600 mm dia

Civil Work;Manufacture, Supply and Delivery of R.C.C. Spun / Vibrated Cast (Reinforced) Socket and Spigot pipes conforming to B.I.S. 458/2003 at ex-factory (rate per meter of effective length) Excluding transportation & taxes. 600 mm dia pipe

Civil Work;Earth work excavation for foundations and depositing on bank for all lifts with an initial lead of 10m including all operational ,incidental, labour charges such as shoring, sheeting ,planking ,strutting etc complete for finished item. excluding dewatering charges etc. as per SS-20B (APSS 308)

Civil Work;Cutting open BT. road surface including stacking of excavated materials including hire charges of all tools and plants and all labour charges for finished item of work as directed by the Engineer - in - Charge.

Civil Work;Cutting open C.C. road surface including stacking of excavated materials including hire charges of all tools and plants and all labour charges for finished item of work as directed by the Engineer - in - Charge.