Municipal Corporation Tender

c hall;Providing impervious coat to exposed RCC roof slab surfcace with CM (1:3), 20mm thick with 1 kg of water proof compound per bag of cement laid over roof when it is green including cost of all materials, excluding conveyance charges of materials and includng all operational, incidental and labour charges for mixing mortar, laying, rendering smooth and thread lining, curing rouding off junctions of wall and slab etc complete for finished item of work. (For First Floor)

c hall;Painting to new walls with 2 coats of ready mixed oil bound wahsable distemper of approved brand and shade over a base coat of appropriate primer of approved brand, making 3 coats in all to give an even shade after thourughly brushing the surface to remove all dirt and remains of loose powdered materials, including cost and conveyance of all materials to work site and all operational, incidental, labour charges etc. complete for finished item of work as per SS 911

c hall;Flooring with vitrified tiles of( Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm) 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete,, etc., complete for finished item of work including the cost of conveyance of all materials. (For Ground Floor)

c hall;Flooring with vitrified tiles of( Nano polished /stain free soluble salt porcelain vitrified tiles screen printed of size 600 x 600 mm and thickness between 8-10 mm) 1st quality of any colour and finish in all shades and designs, set over base coat of cement mortar (1:8), 12 mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed neatly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand water and tiles etc., complete,, etc., complete for finished item of work including the cost of conveyance of all materials. (For First Floor)

c hall;Flooring with ceramic tiles of size 400 x 400 mm and thickness between 7-8 mm of 1st qualilty of all shades in cement mortor (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread #@ 3.3kgs per sqm and jointed neatlly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc complete etc complete for finished item of work,. (APSS No.701 & 707) (For Ground Floor)

c hall;Flooring with ceramic tiles of size 400 x 400 mm and thickness between 7-8 mm of 1st qualilty of all shades in cement mortor (1:8), 12mm thick over CC bed already laid or RCC roof slab, including neat cement slurry of honey like consistency spread #@ 3.3kgs per sqm and jointed neatlly with white cement paste to full depth mixed with pigment of matching shade, including cost of all materials like cement, sand, water and tiles etc complete etc complete for finished item of work,. (APSS No.701 & 707) (For First Floor)

c hall;Flooring with chequrred terrazzo tiles of 20 mm thick (medium shade) set over base coat of cement mortar (1:6) 12 mm thick over CC bed already laid or RCC roof slab, including near cement slurry of honey like consistency spread @ 3.3.kgs per sqm & jointed with neat cement to full depth mixed with pigment of matching shade including cost of all materials like cement, sand water and tiles etc., complete, excluding seigniorage charges, complete for finished item of work, but excluding the cost of conveyance of all materials.

c hall;Providing dadooing to walls with glazed full body ceramic tiles of 300 X 450MM size and thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads and contractors profit complete for finished item of work. (Ground floor)

c hall;Providing dadooing to walls with glazed full body ceramic tiles of 300 X 450MM size and thickness between 5 to 7mm 1st quality conforming to IS: 13711, IS: 13712, IS: 13630(Parts 1 to 15) of any colour and finish in all shades and designs with borders as approved by Engineer-in-Charge set over base coat of CM(1:3) 12 mm thick using screened sand with cement slurry of honey like consistency spread at the rate of 3.30 kgs per sqm and jointing with white cement paste mixed with pigment of matching shade to full depth, including cost of all materials like tiles, cement, sand and water etc., and overheads and contractors profit complete for finished item of work. (First floor)

c hall;Providing skirting to internal walls to 15cm height / rises of steps with 25mm thick polished shahabad stone length equal to flooring stones, set over base coat of CM 1:3 12mm thick with cement slurry of honey like cosistency spread at the rate of 3.30 kgs per sqm and jointed with white cment paste mixed with pigment of matcching shade of full depth, including cost of the material like shabad stone, cment, snad and water etc complete etc complete for finished item of work. (Ground floor)

c hall;Providing skirting to internal walls to 15cm height / rises of steps with 25mm thick polished shahabad stone length equal to flooring stones, set over base coat of CM 1:3 12mm thick with cement slurry of honey like cosistency spread at the rate of 3.30 kgs per sqm and jointed with white cment paste mixed with pigment of matcching shade of full depth, including cost of the material like shabad stone, cment, snad and water etc complete etc complete for finished item of work. (First floor)

c hall;Supplying and fixing of Unplasticized Poly Vinyl Chloride (UPVC) 2 Track?2 Panel Sliding windows duly manufactured using UPVC reinforced profiles(Composition of profile shall consists a minimum of 5.5 PHR of TiO2 and not more than 12 PHR of CaCo3 for every 100 parts of PVC resin) of (62 mm x 60 mm)/(60 mm x 45 mm) x 2.20 mm for outer frames, (66 mm x 38 mm)/(58 mm x 39 mm) x 2.20 mm for sliding shutter frames capable of mounting single glazing system, structurally reinforced with hot dip galvanized up to 50 microns of minimum thickness of 1.0/1.2 mm prefabricated & welded through fusion welding. The window sash shall be fitted with 5 mm thick clear float glass of reputed make duly fixed with Grey colour TPV Gasket for sash & Glazing bead shall be co-extruded with Grey colour soft PVC. System shall have single point locking with Touch Lock and the system is to be installed at the site using anchor fasteners, silicon rubber sealant, easy glazing/ deglazing at site etc., including cost and conveyance of all materials, accessories,labour charges for transportation, erection at site complete for finished item of work. (SSR 2022-23, TBSC-L.III-08)

c hall;Flush door shutters, solid bond wood block board type with teak veneer on one face and commercial ply on another face (lipping): 35 mm thick conforming to IS:2202 (SSR 2022-23, TBSC-L.II-11, Sl. No.549)

c hall;Supplying and fixing iron grills of 25mm square bars in 50x50x6mm. M.S. Angle frames including cost and conveyance of all materials and fixing in position fabrication charges etc., complete as per specification.

c hall;Painting with Synthetic Enamel paints - Two Coats including cost and conveyance and labour charges etc., complete as per standred specification. Old wood work & New iron work

c hall;Wiring with 2 runs of 14/0.3mm (1.0 Sq.mm) Fire Retardant (FR) P.V.C. insulated flexible copper cable (ISI MARK) in existing pipe with 6A switch, Ceiling rose and 3mm thick hylam sheet covering to switch control box including all labour charges etc., complete for light, bell, fan and exhaust fan points in Non-Residential Buildings

c hall;Supply, Transportation of energy efficient fan, 1200 mm sweep, aluminium body, consuming 28 W, BEE 5 star rated, ceiling fan with Brush Less Direct Current(BLDC)motor, class of insulation: B, 3 no's blades, 30 cm long down rod, 2 no's canopies, shackle'kit, safety rope, copper winding, Power Factor greater than 0.90, Service Value (CMMAV) greater than 8.5, Air delivery minimum 235 CMM, 350 RPM (tolerance as per IS:374-2019), THD less than 10%. with remote or compatible to electronic step type regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C(max), insulation resistance more than 2 mega ohm, suitable for 230V, 50 HZ, single phase AC supply, earthing etc., including all standard accessories etc., complete. Makes : Atomberg (Efficio ) / Havells / Orient (SSR 2022-23, ELEC- 5.1.1)

c hall;Supply and transportation of 20W +/-10%, >/ 2000 lumens, 1200mm length LED retro tube light, housing made with alluminium anodised body, wide operating voltage with double side connection, PF=0.9, Surge protection: > 2KV, THD<15%, with inbuilt driver and frosted cover CCT: 3000K - 6500K as desired by the department and as per IS specifications, minimum CRI=80,.etc complete with 5 years warranty with BIS Certification.LUMINAIRE MAKE: Phillips / OSRAM / Wipro / Crompton / Bajaj / Havells / Jaquar / IB LED / Panasonic / Halonix / HPL / Syska / Eveready / Surya / Keselec/ FIEM / Arraystorm / GM / Goldmedal (SSR 2022-23, ELEC-3.5.10)

c hall;Supply of 6-32A DP MCB 10KA, C/D Curve ISI Mark. Makes : Legrand-DX3 / Schneider-Acti9 / Siemens / L&T Exora / Cabtree / Indo Asian / BCH (SSR 2022-23, ELEC-2.14.1c)

c hall;Supply of 4.0 Sqmm FRLS / HFFR PVC insulated 1100V grade as per IS:694/1990 specification for Copper cable. Makes : Khanthi / Vimal / Stanjo / Rajnigandha / Orbit (SSR 2022-23, ELEC-1.5.3c)

c hall;Manufacture, Supply and Delivery of 110mm dia (4.0 Kgs/cm2) Unplasticised PVCs Pipes for potable water supplies conforming to IS : 4985/2000 (3rd revision) with bell ends (Socket) as per specification in light Grey/Natural Ivory Grey/ Any other Color (except White) inclusive of transportation to the sub-divisional stores anywhere in TG excluding Taxes. (SSR 2022-23, Sl No. 17 PVC pipes)

c hall;Supplying & fixing approved make Orissa Pan white glazed W.C 1st quality ISI marked conforming to IS:2556-Part-3-2004 with "P" or "S" trap: 580 mm x 440 mm (TBSP-E.I-03, SSR 22-23 Sl. No. 253)

c hall;Supplying & Fixing low down porcelain flushing tank with lid 10 Lit Capacity with internal components (TBSP-E.IV-01, SSR 22-23 Sl. No. 267)

c hall;Supplying & Fixing Indian make Flat Back Wash Hand Basin 1st quality conforming to IS:2556-Part-4:1972 with waste fittings like rubber plug, chain, 32 mm nominal size C.P. Fitting with parallel pipe thread conforming to IS:2963-1979 and fitted with 15 mm nominal bore Chromium Plated Pillar Tap of 1st quality Indian make 400 grams Seiko/ Senior/ Nice/ Esso or equivalent complete with standard CI brackets including wooden block: 630 x 450 mm - Single C.P. Pillar cock (TBSP-E.VI-02, SSR 22-23 Sl No. 273)

c hall;S & F Bronze Gate/ Globe valve as per IS - 778 Class - I,Indianmakeheavytype-25mmNBSize (TBSP-G.III-03, SSR 21-22 Sl. No. 438)

c hall;S&F premium make CPVC Pipes of 28.60mm OD Pipe - SDR 13.5 (TBSP-J.III-03, SSR 22-23 Sl No. 692)

c hall;Providing & Placing on Terrace (at all floor levels) polyethylene water storage tank with Double layer approved brand & manufacture with cover and suitable locking arrangement & making necessary holes for inlet & outlets and over flow pipes but without fittings & base support for tanks

c hall;Supplying, laying, jointing and testing 152.4 mm SWG SP-1 pipes of ISI make conforming to ISI 651 & 4127 with airtight cement joints in CM 1.5:1 prop. including excavation of trenches and socket pits in any soil (except rock requiring blasting) up to 914.4 mm (3'0")) depth and refilling with watering and tamping (TBSP-A.I-04, SSR 22-23 Sl. No. 4)

c hall;Constructing 904.0 mm (3?0?) dia solid block masonry inspection chamber as per IS - 4111: Part-1:1986 with cement mortar (1:6) prop using fly-ash blocks of 225 mm thick from approved source having a minimum crushing strength of 10 N/sq.mm including plastering with cement mortar1:3prop;½?thickbothinsideand outside fitted with 20? dia RCC manhole covers and frames including excavating pits up to a depth of 904 mm (3'-0") in all sorts of soils (excluding rock) and laying cement concrete (1:4:8) 150 mm thick using 40 mm HBG Metal and P.C.C. 1:2:4 benching and channel 100 mm thick as per Standard specification and including cost and conveyance of all materials like cement, sand, bricks, water etc., to site, cost of seigniorage charges on all materials and all incidental and operational, labour charges like mixing cement mortar, constructing masonry, lift charges, curing etc., complete for finished item of work as per Standard specification.(TBSP-B.I-01, SSR 22-23 Sl. No. 78)

c hall;S&F of 15 mm brass body CP finish bib tap of not less than 300 grams weight with quarter turn spindle with either internal or external threaded connection conforming to IS 8931 (SSR 2022-23, TBSP-F.I-02)

c hall;Supplying & Fixing white glazed flat back half stall urinals 1st quality conforming to IS:2556-1995 with standard C.P. Spreader fixed with screws complete Indian make : 590 x 375 x 390 mm (TBSP-E.VII-03, SSR 22-23 Sl. No. 290)