Municipal Corporation Tender

Construction of CC drains;PCC 1:2:4 using 20 mm and 10mm Walls including cost and conveyance of all labour and materials charges etc., complete.

Construction of CC drains;Plain Cement concrete M15 (1:2.5:5) using ,20,10 mm metal with concrete mixture including cost and conveyance of all labour and materials charges etc., complete..(VENT)

Construction of CC drains;Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete

Construction of CC drains;R.C.C grade M 25 using Concrete mixer (Nominal Mix) using 20 mmGraded Metal (MORD)All work including cost and conveyance of all labour and materials charges etc., complete.(Design mix)

Construction of CC drains;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

Construction of CC drains;BR-CCPV-5- Construction of M30 grade plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43 grade cement @ 350 kg per cum or any other type as per Clause 1501.2.2 M30 (Grade), coarse and fine aggregates conforming to IS : 383, maximum in a concrete mixer of not less than 0.2 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle, scareed and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, applying debonding strips, primer, sealant, near approaches to bridge / culvert and construction joints, admixtures as approved, curing of concrete slabs for 14- days, curing compound (where specified) and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD.

Construction of CC drains;Supply of 25.4 mm thick masticpad, placing the same 25mm below top of the pavement slab sealing with hot sealing compound(Grade -A, ISI ) polysulphide at 5.00mts intervals in C.C Pavement including cost and conveyance of materials, labour charges for placing in position for expansion joints conforming to MPRTH Specificatio No.602

Construction of CC drains;Supplying and placing seperation membranes of impermeable plastic sheeting(ply sheet) 125 microns thick under payments slab including cost and conveyance etc complete. Sl.no 274 of sor