Municipal Corporation Tender

cc road;Supply and placing of the M-30 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 350 Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water, centering etc., to site, all labour charges for mixing, transported to site by transit mixer,pumping and laying concrete, centering and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

cc road;Providing Disc Vibrator floating with power floater, mechnical traweling, finishing with sound edges and corners, including hire and operational charges of machinery labour, fule etc., complete for finished item of work as directed by Engineer-in-charge of the work

cc road;Supply and placing of impermeable plastic sheet 125 micron thickness over cement concrete mix as a separation membrane including cost and conveyance of all materials etc., for finished item of work.

cc road;Saw cut joints for freshly laid concrete pavment including all material and laobur charges etc.complete

cc road;Carting the excavated earth to a lead of 10 KMS including Labour chargess for loading and unlosding, Transportation etc. complete as per specification.

cc road;Supply and delivery of RCC Perforated square cover of size 0 .70x 0.70x 0.125 with load bearing capacity 40 MT made of Vibrated Reinforced Cement Concrete M40 design mix with 430 Kgs Cement/Cum. of Concrete, 20mm normal size Hard Granite Machine Crushed metal @ 0.92 Cum./Cum. of Concrete and sand @ 0.46 Cum./Cum. of Concrete for RCC works including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Seigniorage Charges, and Labour Charges for mixing, centering, laying Concrete tamping, vibrating, lifting, curing, finishing top surface including hire charges of concrete mixing machinery reinforced with High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars and fabrication charges, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,loading and unloading .including transpotation charges, Complete for finished item of Work

cc road;Supply and delivery of RCC base Frame with size of 0 .90 X 0.90 X 0.20 with load bearing capacity 40 MT made of Vibrated Reinforced Cement Concrete M40 design mix with 430 Kgs Cement/Cum. of Concrete, 20mm normal size Hard Granite Machine Crushed metal @ 0.92 Cum./Cum. of Concrete and sand @ 0.46 Cum./Cum. of Concrete for RCC works including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Seigniorage Charges, and Labour Charges for mixing, centering, laying Concrete tamping, vibrating, lifting, curing, finishing top surface including hire charges of concrete mixing machinery reinforced with High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars and fabrication charges, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,loading and unloadingetc and including transportion charges , Complete for finished item of Work.

cc road;Engaging Labour including all Charges Complete as per specification