Municipal Corporation Tender

swd;Manufacturing and supply of covers using Vibrated Reinforced Cement Concrete M40 design mix with 430 Kgs Cement/Cum of Concrete, 20mm normal size Hard Cranite Machine Crushed metal @ 0.92 Cum /Cum. of Concrete and sand @ 0.46 Cum./Cum. of Concrete for RCC works including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Seigniorage Charges, all taxes and Labour Charges for mixing , centering & laying Concrete tamping, vibrating, lifting, curing, finishing. and Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) Cover Size 0.7 x 0.7 x 0.125 m and Load bearing Capacity of 40 MT

swd;Manufacturing and supply of Frames using Vibrated Reinforced Cement Concrete M40 design mix with 430Kgs Cement/Cum of Concrete, 20mm normal size Hard Cranite Machine Crushed metal @ 0.92 Cum /Cum. of Concrete and sand @ 0.46 Cum./Cum. of Concrete for RCC works including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Seigniorage Charges, all taxes and Labour Charges for mixing , centering & laying Concrete tamping, vibrating, lifting, curing, finishing. and Providing High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position, tying including sales and other taxes on all materials etc., complete for finished item of work in all floors.( APSS No.126) Base Frame Size 0.9 x 0.9 x 0.2 m and Load bearing Capacity of 40 MT

swd;Supply and placing of the M-20 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 350Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water etc., to site, all labour charges for mixing, transported to site by transit mixer, pumping and laying concrete and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.