Municipal Corporation Tender

civil work;Providing and fixing Mandatory / Regulatory sign boards size 600 mm circle made out of Type-XI of ASTMD 4956-09 wide angle cube cornered micro prismatic Retro reflective sheeting and conforming to IRC 67:2012 for full background of white colour and letters logos done by screen printing in Black colur, boarders by screen painting in red colour and fixed over 3MM alluminium composite Material sheet having minimum 0.30mm thick Alluminium skin on both sides with back side painted grey colour and fixed over back support frame of MS angle 25x25x3mm all round and fixing with 35x35x4mm and mounted on a MS angle post of size 75x75x6mm with clear height of not less than 2.1m from the ground level to the bottom of the board. The signpost should be painted with one coat of red oxide paint and 2 coats of synthetic enamel paint black and white colour with bands of 30cm of height. The signpost shall be firmly fixed with MS base angle 35x35x4 mm in to the ground by M15 concrete foundation of size 450x450x600mm including cost and conveyance of all materials equipment, machinery and labour with all leads and lift loading charges necessary for satisfactory completion of the work as directed by Engineer-in-charge

civil work;Supply & Fixing of Molded Shanks Raised Pavement Markers made of plastic body moulded from HIPS(High impact polysterene) or ABS or ASA(Acrylic Strene Acrylonitrite and Reflective Panels with micro prismatic lens capable of providing total internal reflection of light entering the lens face and shall suupport a load of 13635 kg tested in accordance to ASTM D 4280 Type H and complying to Specifications of Category-A of MORTH Circular no. RW/NH/33023/10-97-DO III Dt. 11-06-1997.The height and width shall not exceed 20mm, 130mm with minimum reflective area of 13 sq.cm on each side and the slope to the base shall be 35+/- 5 degrees.The strength of detatchment of the integrated Cylindrical Shanks,(of Diameter not less than 19+/- 2 mm and Height not less than 30+/- 2 mm) from the body is to be a minimum value of 700 kg.Fixing will be by drilling Holes on the road from thee twin shanks, without nails and using epoxy resine based adhesive as per manufacturers reccomendations and complete as directed by The Engineer.

civil work;Supply and placing of the Ready Mix Concrete (RMC) M20 grade Standard Design Mix Concretegrade as per IS4926- 2003 with minimum cement content as per IScode456- 2000 using 20mm graded metal, from standard suppliers approved by the department including pumping, laying concrete, centering, shuttering vibrating / screed / pan vibrating, curing etc. complete but excluding cost of steel and its fabrication charges, for finished item of work. (M20-300Kgs) {50% natural river sand + 50% rock sand}