Municipal Corporation Tender

civil;White washing two coats with lime of approved quality to give an even shade after thoroughly brushing the surface to remove all dirt and remains of loose powdered materials including cost of all materials, labour charges and incidental such as scaffolding, lift charges etc., complete for finished item of work, but excluding conveyance charges of materials

civil;Construction of RR Masonary in C.M (1:6) prop. Using hard granite stone including cost and conveyance of all materials like cement, sand, water, Granite stone etc. including cost of seigniorage charges on all materials, all taxes including labour for cutting stones to required size and shape, mixing of cement mortar construction, Scaffolding charges etc. complete for finished item of work.

civil;Flush pointing with CM (1:3) to RR Masonary, including cost and conveyance of all materials to site, cost of seigniorage charges on all materials, all taxes, labour charges on all materials, curing etc. complete for finished item of work.

civil;Providing, laying, spreading and compacting graded stone aggregate to wet mix macadam specification including premixing the material with water at OMC in mechanical mixer (Pug Mill), carriage of mixed material by tipper to site, laying in uniform layers in sub-base/base course on a well prepared sub-base and compacting with smooth wheel roller of 80 to 100kN / Vibratory Roller 80-100 kN weight to achieve the desired density including lighting, barricading and maintenance of diversion, etc as per Tables 400.11 & 400.12 and Technical Specification Clause 406 MORD / MORTH.

civil;Supply and placing of the M-10 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 220Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water, centering etc., to site, all labour charges for mixing, transported to site by transit mixer, pumping and laying concrete, centering and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

civil;Supply and placing of the M-30 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 350 Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water, centering etc., to site, all labour charges for mixing, transported to site by transit mixer,pumping and laying concrete, centering and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

civil;Supply and placing of the M-30 Design Mix Concrete by ready mix, mixed in a batching and mixing plant as per approved mix design, for sub base over a prepared subgrade, cement content not to be less than 350 Kg/Cum with crushed stone coarse aggregate of 25 mm and 12.5 mm nominal sizes graded as per table 600-1, with coarse and fine aggregate conforming to IS: 383, the size of coarse aggregate not exceeding 25 mm, aggregate cement ratio not to exceed 15:1, aggregate gradation after blending to be as per table 600-1, concrete strength not to be less than 10 Mpa at 7 days, including cost and conveyance of all materials like cement, sand, coarse aggregate, water, centering etc., to site, all labour charges for mixing, transported to site by transit mixer,pumping and laying concrete, centering and vibrating, curing and finishing etc. complete, including seigniorage charges and cost of steel and its fabrication charges for finished item of work, as per Technical Specification 601 MORTH etc., complete for finished item of work- For CC Roads.

civil;Supply and placing of impermeable plastic sheet 125 micron thickness over cement concrete mix as a separation membrane including cost and conveyance of all materials etc., for finished item of work.

civil;Mechanical trowelling, finishing with sound edges and corners,including hire and operational charges of machinery, labour, fuel etc, complete for finished item of work as directed by Engineer-in-Charge

civil;Painting with Synthetic Enamel paints - Two Coats including cost and conveyance and labour charges etc., complete as per standred specification. Old wood work & New iron work

civil;Supply and delivery of RCC Perforated square cover of size 0 .70x 0.70x 0.125 with load bearing capacity 40 MT made of Vibrated Reinforced Cement Concrete M40 design mix with 430 Kgs Cement/Cum. of Concrete, 20mm normal size Hard Granite Machine Crushed metal @ 0.92 Cum./Cum. of Concrete and sand @ 0.46 Cum./Cum. of Concrete for RCC works including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Seigniorage Charges, and Labour Charges for mixing, centering, laying Concrete tamping, vibrating, lifting, curing, finishing top surface including hire charges of concrete mixing machinery reinforced with High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars and fabrication charges, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,loading and unloading .including transpotation charges, Complete for finished item of Work

civil;Supply and delivery of RCC base Frame with size of 0 .90 X 0.90 X 0.20 with load bearing capacity 40 MT made of Vibrated Reinforced Cement Concrete M40 design mix with 430 Kgs Cement/Cum. of Concrete, 20mm normal size Hard Granite Machine Crushed metal @ 0.92 Cum./Cum. of Concrete and sand @ 0.46 Cum./Cum. of Concrete for RCC works including Cost and Conveyance of all materials like Cement Sand Coarse Aggregate Water Etc., to Site, Seigniorage Charges, and Labour Charges for mixing, centering, laying Concrete tamping, vibrating, lifting, curing, finishing top surface including hire charges of concrete mixing machinery reinforced with High Yield Strength Deformed (HYSD)/ Thermo Mechanically Treated (TMT) / Mild steel (MS) steel bars (Fe 415/ Fe 500 grade as per IS 1786-1979) of different diameters for RCC works , including labour charges for straightening, cutting, bending to required sizes and shapes, placing in position with cover blocks of approved materials and size and tying and lap-splicing with binding wire of 18 SWG, forming grills for reinforcement work as per approved designs and drawings, including cost and conveyance of steel bars and fabrication charges, including all wastages such as overlaps, couplings, chairs, spacer bars including cost and conveyance of binding wire, cover blocks and all incidental, operational, labour charges such as cutting, bending, placing in position,loading and unloadingetc and including transportion charges , Complete for finished item of Work.